Targeting S+ (version 31 and above) requires that an explicit value
for android:exported be defined when intent filters are present
Change-Id: I2ce2b2cd1dcd69e343ae8577587483b19d825fdc
While Google found that fingerprint HAL is insensitive to
increased CPU throughput, we have not found that to be the
case. Allowing more CPUs makes fingerprint unlock up to
2x faster in some tests.
SM8250 device with fingerprint on display:
- Before: 3128ms
- After: 944ms
SDM845 device with fingerprint on the power button:
- Before: 1146ms
- After: 688ms
This reverts commit d0fdb4431d26e4f257b8867f67ffd9b4a9818d9e.
Change-Id: I7a28d82caee2b8503b974a8226b29240eb072ceb
* Use Theme.SubSettingsBase for theme
* Replace PreferenceActivity with CollapsingToolbarBaseActivity
* Add Titles to preference screen
* Remove onOptionsItemSelected and where necessary move to activity
Change-Id: Ic879ce61d83a33da12829008a4336c8a23230d63
Signed-off-by: SamarV-121 <samarvispute121@pm.me>
Signed-off-by: Bruno Martins <bgcngm@gmail.com>
* Move fingerprint HIDL to 2.3
* Remove Lineage FOD HIDL
[Linux4: Autodetect if fingerprint is udfps]
Change-Id: I8c628d2ee9158b45eeb04dd324b56ef3697296b7
To workaround b/141025174, adding support for devices without display
idle signals. Also added a property to override idle display function.
Besides the idle signal support, this CL also makes touch boost duration
tunable through several new vendor properties. It also named display
idle monitor thread and cleans out the obsolete HIDL Power HAL
implementation.
Bug: 168080943
Bug: 169065024
Bug: 171494137
Test: Boot and trace
Change-Id: I76067d10958654d539624ec4cac8f346103e67bc
Some devices have extra pointers in this structure that if non-zero
causes libsec-ril.so to segfault
Change-Id: I9fd07a4747ef0fb1388ebbec472f2dda8dea4003
* The patch was merged pre-maturely before r-perf-profiles topic got merged. Lets wait properly this time and be patient.
This reverts commit c50258fca0.
Change-Id: I60129f3886b9ab570a3d19b1e4cef9084ab87533
* also change NOT_INTERACTIVE to INTERACTIVE so it can be used with
fallthrough
Signed-off-by: Michael Benedict <michaelbt@live.com>
Change-Id: I1af27d2503b98bd873c8fe84a1028cd46e7a4a53
These commits are adapted for aidl counterpart.
power-libperfmgr: adapt and rebrand for hardware/samsung
power-libperfmgr: simply wait if idle state node is not present
power-libperfmgr: remove Google-specific display LPM control
power-libperfmgr: remove Google-specific camera and audio hints
power-libperfmgr: Give access to radio group
power-libperfmgr: initialize powerHAL when boot is completed
power-libperfmgr: declare override="true" in manifest
power-libperfmgr: add a Power Hint template with common nodes
Notes:
* Interactive, DT2W, and Lineage perf hint will be re-implemented outside of this commit.
Signed-off-by: Michael Benedict <michaelbt@live.com>
Co-authored-by: Jesse Chan <jc@lineageos.org>
Change-Id: I7034cb083bd20ec3a62ec338f5cbfb3e3ba7a0ff
sensors: 2.1: get rid of com.samsung.permission.SSENSOR
Samsung uses a permission com.samsung.permission.SSENSOR
for Samsung-specfic sensors. Android obviously does not
have that and the default is denied when there is no
permission. As such, those sensors are inaccessible.
Thus, this change removes this permission from those sensors
so we can use them.
Android does not require special permissions for most sensors
so this change doesn't attach additional permission requirements
to those sensors.
However, note that it is possible that some sensitive sensors
introduced by Samsung in the future may use SSENSOR permission
and for privacy reasons they should be handled separately with
appropriate permission control attached.
Change-Id: Ia3033898722039b285e522e226074238508f6093
sensors: 2.1: map Samsung proximity sensor type to generic
Samsung uses their own com.samsung.sensor.physical_proximity
type instead of SENSOR_TYPE_PROXIMITY of Android.
This makes proximity sensor unavailable for us as we only
look for SENSOR_TYPE_PROXIMITY.
Thus, this change maps Samsung's vendor-specific proximity
sensor type to generic one.
Change-Id: I64f6558876e1398dfbea0e5c0eb76aa1aafd2dfd
sensors: 2.1: set max range of proximity sensor to 1
Samsung's proximity sensor type is binary in nature.
There are only two state: FAR and NEAR.
However, Samsung uses values between min and max for
other purposes like proximity detection during Always-On
Display.
This breaks proximity detection during Doze for AOSP as
AOSP only considers the proximity sensor in FAR state
when the value equals or larger than max.
Thus, this change sets the max to 1 so any > 1 value
would be considered as FAR and the behavior of this vendor
proximity sensor type matches the behavior expected by AOSP.
Change-Id: I56af8e2ae743b47e3c4894e5ef68ce0b54e5cfdb
hidl:sensors: 2.1 Dump sensor information if verbose is turned on
This is useful for improving the sensors HAL.
Change-Id: I41430974b40e14095396aaf645b8b37d08b13710
sensors: 2.1: declare override="true" in manifest
Change-Id: If8349ca7b8102c3ffee545d1065d0e7d08d22652
roynatech2544