You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
269 lines
7.4 KiB
269 lines
7.4 KiB
/*
|
|
* LinuxPPC arch/ppc/kernel/qspan_pci.c Dan Malek (dmalek@jlc.net)
|
|
*
|
|
* QSpan Motorola bus to PCI bridge. The config address register
|
|
* is located 0x500 from the base of the bridge control/status registers.
|
|
* The data register is located at 0x504.
|
|
* This is a two step operation. First, the address register is written,
|
|
* then the data register is read/written as required.
|
|
* I don't know what to do about interrupts (yet).
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/mpc8xx.h>
|
|
|
|
/*
|
|
* When reading the configuration space, if something does not respond
|
|
* the bus times out and we get a machine check interrupt. So, the
|
|
* good ol' exception tables come to mind to trap it and return some
|
|
* value.
|
|
*
|
|
* On an error we just return a -1, since that is what the caller wants
|
|
* returned if nothing is present. I copied this from __get_user_asm,
|
|
* with the only difference of returning -1 instead of EFAULT.
|
|
* There is an associated hack in the machine check trap code.
|
|
*
|
|
* The QSPAN is also a big endian device, that is it makes the PCI
|
|
* look big endian to us. This presents a problem for the Linux PCI
|
|
* functions, which assume little endian. For example, we see the
|
|
* first 32-bit word like this:
|
|
* ------------------------
|
|
* | Device ID | Vendor ID |
|
|
* ------------------------
|
|
* If we read/write as a double word, that's OK. But in our world,
|
|
* when read as a word, device ID is at location 0, not location 2 as
|
|
* the little endian PCI would believe. We have to switch bits in
|
|
* the PCI addresses given to us to get the data to/from the correct
|
|
* byte lanes.
|
|
*
|
|
* The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
|
|
* It always forces the MS bit to zero. Therefore, dev_fn values
|
|
* greater than 128 are returned as "no device found" errors.
|
|
*
|
|
* The QSPAN can only perform long word (32-bit) configuration cycles.
|
|
* The "offset" must have the two LS bits set to zero. Read operations
|
|
* require we read the entire word and then sort out what should be
|
|
* returned. Write operations other than long word require that we
|
|
* read the long word, update the proper word or byte, then write the
|
|
* entire long word back.
|
|
*
|
|
* PCI Bridge hack. We assume (correctly) that bus 0 is the primary
|
|
* PCI bus from the QSPAN. If we are called with a bus number other
|
|
* than zero, we create a Type 1 configuration access that a downstream
|
|
* PCI bridge will interpret.
|
|
*/
|
|
|
|
#define __get_pci_config(x, addr, op) \
|
|
__asm__ __volatile__( \
|
|
"1: "op" %0,0(%1)\n" \
|
|
" eieio\n" \
|
|
"2:\n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
"3: li %0,-1\n" \
|
|
" b 2b\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
" .align 2\n" \
|
|
" .long 1b,3b\n" \
|
|
".text" \
|
|
: "=r"(x) : "r"(addr))
|
|
|
|
#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500))
|
|
#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504))
|
|
|
|
#define mk_config_addr(bus, dev, offset) \
|
|
(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
|
|
|
|
#define mk_config_type1(bus, dev, offset) \
|
|
mk_config_addr(bus, dev, offset) | 1;
|
|
|
|
/* Initialize the QSpan device registers after power up.
|
|
*/
|
|
void
|
|
qspan_init(void)
|
|
{
|
|
uint *qptr;
|
|
|
|
|
|
|
|
qptr = (uint *)PCI_CSR_ADDR;
|
|
|
|
/* PCI Configuration/status. Upper bits written to clear
|
|
* pending interrupt or status. Lower bits enable QSPAN as
|
|
* PCI master, enable memory and I/O cycles, and enable PCI
|
|
* parity error checking.
|
|
* IMPORTANT: The last two bits of this word enable PCI
|
|
* master cycles into the QBus. The QSpan is broken and can't
|
|
* meet the timing specs of the PQ bus for this to work. Therefore,
|
|
* if you don't have external bus arbitration, you can't use
|
|
* this function.
|
|
*/
|
|
#ifdef EXTERNAL_PQ_ARB
|
|
qptr[1] = 0xf9000147;
|
|
#else
|
|
qptr[1] = 0xf9000144;
|
|
#endif
|
|
|
|
/* PCI Misc configuration. Set PCI latency timer resolution
|
|
* of 8 cycles, set cache size to 4 x 32.
|
|
*/
|
|
qptr[3] = 0;
|
|
|
|
/* Set up PCI Target address mapping. Enable, Posted writes,
|
|
* 2Gbyte space (processor memory controller determines actual size).
|
|
*/
|
|
qptr[64] = 0x8f000080;
|
|
|
|
/* Map processor 0x80000000 to PCI 0x00000000.
|
|
* Processor address bit 1 determines I/O type access (0x80000000)
|
|
* or memory type access (0xc0000000).
|
|
*/
|
|
qptr[65] = 0x80000000;
|
|
|
|
/* Enable error logging and clear any pending error status.
|
|
*/
|
|
qptr[80] = 0x90000000;
|
|
|
|
qptr[512] = 0x000c0003;
|
|
|
|
/* Set up Qbus slave image.
|
|
*/
|
|
qptr[960] = 0x01000000;
|
|
qptr[961] = 0x000000d1;
|
|
qptr[964] = 0x00000000;
|
|
qptr[965] = 0x000000d1;
|
|
|
|
}
|
|
|
|
/* Functions to support PCI bios-like features to read/write configuration
|
|
* space. If the function fails for any reason, a -1 (0xffffffff) value
|
|
* must be returned.
|
|
*/
|
|
#define DEVICE_NOT_FOUND (-1)
|
|
#define SUCCESSFUL 0
|
|
|
|
int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned char *val)
|
|
{
|
|
uint temp;
|
|
u_char *cp;
|
|
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xff;
|
|
return DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
|
|
|
|
offset ^= 0x03;
|
|
cp = ((u_char *)&temp) + (offset & 0x03);
|
|
*val = *cp;
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned short *val)
|
|
{
|
|
uint temp;
|
|
ushort *sp;
|
|
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xffff;
|
|
return DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
|
|
offset ^= 0x02;
|
|
|
|
sp = ((ushort *)&temp) + ((offset >> 1) & 1);
|
|
*val = *sp;
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned int *val)
|
|
{
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xffffffff;
|
|
return DEVICE_NOT_FOUND;
|
|
}
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_pci_config(*val, QS_CONFIG_DATA, "lwz");
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned char val)
|
|
{
|
|
uint temp;
|
|
u_char *cp;
|
|
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return DEVICE_NOT_FOUND;
|
|
|
|
qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
|
|
|
|
offset ^= 0x03;
|
|
cp = ((u_char *)&temp) + (offset & 0x03);
|
|
*cp = val;
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*QS_CONFIG_DATA = temp;
|
|
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned short val)
|
|
{
|
|
uint temp;
|
|
ushort *sp;
|
|
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return DEVICE_NOT_FOUND;
|
|
|
|
qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
|
|
|
|
offset ^= 0x02;
|
|
sp = ((ushort *)&temp) + ((offset >> 1) & 1);
|
|
*sp = val;
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*QS_CONFIG_DATA = temp;
|
|
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned int val)
|
|
{
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return DEVICE_NOT_FOUND;
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*(unsigned int *)QS_CONFIG_DATA = val;
|
|
|
|
return SUCCESSFUL;
|
|
}
|
|
|
|
|