drm/msm/dsi-staging: add support to wait post dsi command rx

Some display panel have the requirement of waiting for certain
duration before dsi host can read back the response from panel,
to a DCS read command. This change adds the support to store
the delay required in dsi message structure it self.

Change-Id: I82f53d811f82195eb900e4594b01c6e0f23fed53
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>

drivers/gpu/drm/msm/dsi-staging/dsi_ctrl.c

@@ -1338,9 +1338,6 @@ static int dsi_message_rx(struct dsi_ctrl *dsi_ctrl,
 	u32 dlen, diff, rlen = msg->rx_len;
 	unsigned char *buff;
 	char cmd;
-	struct dsi_cmd_desc *of_cmd;
-
-	of_cmd = container_of(msg, struct dsi_cmd_desc, msg);
 
 	if (msg->rx_len <= 2) {
 		short_resp = true;
@@ -1378,9 +1375,9 @@ static int dsi_message_rx(struct dsi_ctrl *dsi_ctrl,
 		 * wait before reading rdbk_data register, if any delay is
 		 * required after sending the read command.
 		 */
-		if (of_cmd && of_cmd->post_wait_ms)
+		if (msg->wait_ms)
-			usleep_range(of_cmd->post_wait_ms * 1000,
+			usleep_range(msg->wait_ms * 1000,
-				     ((of_cmd->post_wait_ms * 1000) + 10));
+				     ((msg->wait_ms * 1000) + 10));
 
 		dlen = dsi_ctrl->hw.ops.get_cmd_read_data(&dsi_ctrl->hw,
 					buff, total_bytes_read,

drivers/gpu/drm/msm/dsi-staging/dsi_display.c

@@ -749,7 +749,7 @@ static int dsi_display_cmd_prepare(const char *cmd_buf, u32 cmd_buf_len,
 	cmd->msg.channel = cmd_buf[2];
 	cmd->msg.flags = cmd_buf[3];
 	cmd->msg.ctrl = 0;
-	cmd->post_wait_ms = cmd_buf[4];
+	cmd->post_wait_ms = cmd->msg.wait_ms = cmd_buf[4];
 	cmd->msg.tx_len = ((cmd_buf[5] << 8) | (cmd_buf[6]));
 
 	if (cmd->msg.tx_len > payload_len) {

drivers/gpu/drm/msm/dsi-staging/dsi_panel.c

@@ -1490,7 +1490,7 @@ static int dsi_panel_create_cmd_packets(const char *data,
 		cmd[i].msg.channel = data[2];
 		cmd[i].msg.flags |= (data[3] == 1 ? MIPI_DSI_MSG_REQ_ACK : 0);
 		cmd[i].msg.ctrl = 0;
-		cmd[i].post_wait_ms = data[4];
+		cmd[i].post_wait_ms = cmd[i].msg.wait_ms = data[4];
 		cmd[i].msg.tx_len = ((data[5] << 8) | (data[6]));
 
 		size = cmd[i].msg.tx_len * sizeof(u8);
@@ -3471,6 +3471,7 @@ static int dsi_panel_roi_prepare_dcs_cmds(struct dsi_panel_cmd_set *set,
 	set->cmds[0].msg.tx_buf = caset;
 	set->cmds[0].msg.rx_len = 0;
 	set->cmds[0].msg.rx_buf = 0;
+	set->cmds[0].msg.wait_ms = 0;
 	set->cmds[0].last_command = 0;
 	set->cmds[0].post_wait_ms = 0;
 
@@ -3482,6 +3483,7 @@ static int dsi_panel_roi_prepare_dcs_cmds(struct dsi_panel_cmd_set *set,
 	set->cmds[1].msg.tx_buf = paset;
 	set->cmds[1].msg.rx_len = 0;
 	set->cmds[1].msg.rx_buf = 0;
+	set->cmds[1].msg.wait_ms = 0;
 	set->cmds[1].last_command = 1;
 	set->cmds[1].post_wait_ms = 0;
 

include/drm/drm_mipi_dsi.h

@@ -32,6 +32,7 @@ struct mipi_dsi_device;
  * @type: payload data type
  * @flags: flags controlling this message transmission
  * @ctrl: ctrl index to transmit on
+ * @wait_ms: duration in ms to wait after message transmission
  * @tx_len: length of @tx_buf
  * @tx_buf: data to be written
  * @rx_len: length of @rx_buf
@@ -42,6 +43,7 @@ struct mipi_dsi_msg {
 	u8 type;
 	u16 flags;
 	u32 ctrl;
+	u32 wait_ms;
 
 	size_t tx_len;
 	const void *tx_buf;