You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
588 lines
15 KiB
588 lines
15 KiB
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/blkpg.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* IDE library routines. These are plug in code that most
|
|
* drivers can use but occasionally may be weird enough
|
|
* to want to do their own thing with
|
|
*
|
|
* Add common non I/O op stuff here. Make sure it has proper
|
|
* kernel-doc function headers or your patch will be rejected
|
|
*/
|
|
|
|
|
|
/**
|
|
* ide_xfer_verbose - return IDE mode names
|
|
* @xfer_rate: rate to name
|
|
*
|
|
* Returns a constant string giving the name of the mode
|
|
* requested.
|
|
*/
|
|
|
|
char *ide_xfer_verbose (u8 xfer_rate)
|
|
{
|
|
switch(xfer_rate) {
|
|
case XFER_UDMA_7: return("UDMA 7");
|
|
case XFER_UDMA_6: return("UDMA 6");
|
|
case XFER_UDMA_5: return("UDMA 5");
|
|
case XFER_UDMA_4: return("UDMA 4");
|
|
case XFER_UDMA_3: return("UDMA 3");
|
|
case XFER_UDMA_2: return("UDMA 2");
|
|
case XFER_UDMA_1: return("UDMA 1");
|
|
case XFER_UDMA_0: return("UDMA 0");
|
|
case XFER_MW_DMA_2: return("MW DMA 2");
|
|
case XFER_MW_DMA_1: return("MW DMA 1");
|
|
case XFER_MW_DMA_0: return("MW DMA 0");
|
|
case XFER_SW_DMA_2: return("SW DMA 2");
|
|
case XFER_SW_DMA_1: return("SW DMA 1");
|
|
case XFER_SW_DMA_0: return("SW DMA 0");
|
|
case XFER_PIO_4: return("PIO 4");
|
|
case XFER_PIO_3: return("PIO 3");
|
|
case XFER_PIO_2: return("PIO 2");
|
|
case XFER_PIO_1: return("PIO 1");
|
|
case XFER_PIO_0: return("PIO 0");
|
|
case XFER_PIO_SLOW: return("PIO SLOW");
|
|
default: return("XFER ERROR");
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_xfer_verbose);
|
|
|
|
/**
|
|
* ide_rate_filter - filter transfer mode
|
|
* @drive: IDE device
|
|
* @speed: desired speed
|
|
*
|
|
* Given the available transfer modes this function returns
|
|
* the best available speed at or below the speed requested.
|
|
*
|
|
* TODO: check device PIO capabilities
|
|
*/
|
|
|
|
static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 mode = ide_find_dma_mode(drive, speed);
|
|
|
|
if (mode == 0) {
|
|
if (hwif->pio_mask)
|
|
mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
|
|
else
|
|
mode = XFER_PIO_4;
|
|
}
|
|
|
|
// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
|
|
|
|
return min(speed, mode);
|
|
}
|
|
|
|
int ide_use_fast_pio(ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
if ((id->capability & 1) && drive->autodma)
|
|
return 1;
|
|
|
|
if ((id->capability & 8) || (id->field_valid & 2))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_use_fast_pio);
|
|
|
|
/*
|
|
* Standard (generic) timings for PIO modes, from ATA2 specification.
|
|
* These timings are for access to the IDE data port register *only*.
|
|
* Some drives may specify a mode, while also specifying a different
|
|
* value for cycle_time (from drive identification data).
|
|
*/
|
|
const ide_pio_timings_t ide_pio_timings[6] = {
|
|
{ 70, 165, 600 }, /* PIO Mode 0 */
|
|
{ 50, 125, 383 }, /* PIO Mode 1 */
|
|
{ 30, 100, 240 }, /* PIO Mode 2 */
|
|
{ 30, 80, 180 }, /* PIO Mode 3 with IORDY */
|
|
{ 25, 70, 120 }, /* PIO Mode 4 with IORDY */
|
|
{ 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(ide_pio_timings);
|
|
|
|
/*
|
|
* Shared data/functions for determining best PIO mode for an IDE drive.
|
|
* Most of this stuff originally lived in cmd640.c, and changes to the
|
|
* ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
|
|
* breaking the fragile cmd640.c support.
|
|
*/
|
|
|
|
/*
|
|
* Black list. Some drives incorrectly report their maximal PIO mode,
|
|
* at least in respect to CMD640. Here we keep info on some known drives.
|
|
*/
|
|
static struct ide_pio_info {
|
|
const char *name;
|
|
int pio;
|
|
} ide_pio_blacklist [] = {
|
|
/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */
|
|
{ "Conner Peripherals 540MB - CFS540A", 3 },
|
|
|
|
{ "WDC AC2700", 3 },
|
|
{ "WDC AC2540", 3 },
|
|
{ "WDC AC2420", 3 },
|
|
{ "WDC AC2340", 3 },
|
|
{ "WDC AC2250", 0 },
|
|
{ "WDC AC2200", 0 },
|
|
{ "WDC AC21200", 4 },
|
|
{ "WDC AC2120", 0 },
|
|
{ "WDC AC2850", 3 },
|
|
{ "WDC AC1270", 3 },
|
|
{ "WDC AC1170", 1 },
|
|
{ "WDC AC1210", 1 },
|
|
{ "WDC AC280", 0 },
|
|
/* { "WDC AC21000", 4 }, */
|
|
{ "WDC AC31000", 3 },
|
|
{ "WDC AC31200", 3 },
|
|
/* { "WDC AC31600", 4 }, */
|
|
|
|
{ "Maxtor 7131 AT", 1 },
|
|
{ "Maxtor 7171 AT", 1 },
|
|
{ "Maxtor 7213 AT", 1 },
|
|
{ "Maxtor 7245 AT", 1 },
|
|
{ "Maxtor 7345 AT", 1 },
|
|
{ "Maxtor 7546 AT", 3 },
|
|
{ "Maxtor 7540 AV", 3 },
|
|
|
|
{ "SAMSUNG SHD-3121A", 1 },
|
|
{ "SAMSUNG SHD-3122A", 1 },
|
|
{ "SAMSUNG SHD-3172A", 1 },
|
|
|
|
/* { "ST51080A", 4 },
|
|
* { "ST51270A", 4 },
|
|
* { "ST31220A", 4 },
|
|
* { "ST31640A", 4 },
|
|
* { "ST32140A", 4 },
|
|
* { "ST3780A", 4 },
|
|
*/
|
|
{ "ST5660A", 3 },
|
|
{ "ST3660A", 3 },
|
|
{ "ST3630A", 3 },
|
|
{ "ST3655A", 3 },
|
|
{ "ST3391A", 3 },
|
|
{ "ST3390A", 1 },
|
|
{ "ST3600A", 1 },
|
|
{ "ST3290A", 0 },
|
|
{ "ST3144A", 0 },
|
|
{ "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */
|
|
/* drive) according to Seagates FIND-ATA program */
|
|
|
|
{ "QUANTUM ELS127A", 0 },
|
|
{ "QUANTUM ELS170A", 0 },
|
|
{ "QUANTUM LPS240A", 0 },
|
|
{ "QUANTUM LPS210A", 3 },
|
|
{ "QUANTUM LPS270A", 3 },
|
|
{ "QUANTUM LPS365A", 3 },
|
|
{ "QUANTUM LPS540A", 3 },
|
|
{ "QUANTUM LIGHTNING 540A", 3 },
|
|
{ "QUANTUM LIGHTNING 730A", 3 },
|
|
|
|
{ "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */
|
|
{ "QUANTUM FIREBALL_640", 3 },
|
|
{ "QUANTUM FIREBALL_1080", 3 },
|
|
{ "QUANTUM FIREBALL_1280", 3 },
|
|
{ NULL, 0 }
|
|
};
|
|
|
|
/**
|
|
* ide_scan_pio_blacklist - check for a blacklisted drive
|
|
* @model: Drive model string
|
|
*
|
|
* This routine searches the ide_pio_blacklist for an entry
|
|
* matching the start/whole of the supplied model name.
|
|
*
|
|
* Returns -1 if no match found.
|
|
* Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
|
|
*/
|
|
|
|
static int ide_scan_pio_blacklist (char *model)
|
|
{
|
|
struct ide_pio_info *p;
|
|
|
|
for (p = ide_pio_blacklist; p->name != NULL; p++) {
|
|
if (strncmp(p->name, model, strlen(p->name)) == 0)
|
|
return p->pio;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
int cycle_time = 0;
|
|
|
|
if (id->field_valid & 2) {
|
|
if (id->capability & 8)
|
|
cycle_time = id->eide_pio_iordy;
|
|
else
|
|
cycle_time = id->eide_pio;
|
|
}
|
|
|
|
/* conservative "downgrade" for all pre-ATA2 drives */
|
|
if (pio < 3) {
|
|
if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
|
|
cycle_time = 0; /* use standard timing */
|
|
}
|
|
|
|
return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
|
|
|
|
/**
|
|
* ide_get_best_pio_mode - get PIO mode from drive
|
|
* @drive: drive to consider
|
|
* @mode_wanted: preferred mode
|
|
* @max_mode: highest allowed mode
|
|
*
|
|
* This routine returns the recommended PIO settings for a given drive,
|
|
* based on the drive->id information and the ide_pio_blacklist[].
|
|
*
|
|
* Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
|
|
* This is used by most chipset support modules when "auto-tuning".
|
|
*/
|
|
|
|
u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
|
|
{
|
|
int pio_mode;
|
|
struct hd_driveid* id = drive->id;
|
|
int overridden = 0;
|
|
|
|
if (mode_wanted != 255)
|
|
return min_t(u8, mode_wanted, max_mode);
|
|
|
|
if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
|
|
(pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
|
|
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
|
|
} else {
|
|
pio_mode = id->tPIO;
|
|
if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
|
|
pio_mode = 2;
|
|
overridden = 1;
|
|
}
|
|
if (id->field_valid & 2) { /* drive implements ATA2? */
|
|
if (id->capability & 8) { /* IORDY supported? */
|
|
if (id->eide_pio_modes & 7) {
|
|
overridden = 0;
|
|
if (id->eide_pio_modes & 4)
|
|
pio_mode = 5;
|
|
else if (id->eide_pio_modes & 2)
|
|
pio_mode = 4;
|
|
else
|
|
pio_mode = 3;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (overridden)
|
|
printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
|
|
drive->name);
|
|
|
|
/*
|
|
* Conservative "downgrade" for all pre-ATA2 drives
|
|
*/
|
|
if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
|
|
pio_mode && pio_mode < 4) {
|
|
pio_mode--;
|
|
printk(KERN_INFO "%s: applying conservative "
|
|
"PIO \"downgrade\"\n", drive->name);
|
|
}
|
|
}
|
|
|
|
if (pio_mode > max_mode)
|
|
pio_mode = max_mode;
|
|
|
|
return pio_mode;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
|
|
|
|
/* req_pio == "255" for auto-tune */
|
|
void ide_set_pio(ide_drive_t *drive, u8 req_pio)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 host_pio, pio;
|
|
|
|
if (hwif->set_pio_mode == NULL)
|
|
return;
|
|
|
|
BUG_ON(hwif->pio_mask == 0x00);
|
|
|
|
host_pio = fls(hwif->pio_mask) - 1;
|
|
|
|
pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
|
|
|
|
/*
|
|
* TODO:
|
|
* - report device max PIO mode
|
|
* - check req_pio != 255 against device max PIO mode
|
|
*/
|
|
printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
|
|
drive->name, host_pio, req_pio,
|
|
req_pio == 255 ? "(auto-tune)" : "", pio);
|
|
|
|
hwif->set_pio_mode(drive, pio);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_set_pio);
|
|
|
|
/**
|
|
* ide_toggle_bounce - handle bounce buffering
|
|
* @drive: drive to update
|
|
* @on: on/off boolean
|
|
*
|
|
* Enable or disable bounce buffering for the device. Drives move
|
|
* between PIO and DMA and that changes the rules we need.
|
|
*/
|
|
|
|
void ide_toggle_bounce(ide_drive_t *drive, int on)
|
|
{
|
|
u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */
|
|
|
|
if (!PCI_DMA_BUS_IS_PHYS) {
|
|
addr = BLK_BOUNCE_ANY;
|
|
} else if (on && drive->media == ide_disk) {
|
|
if (HWIF(drive)->pci_dev)
|
|
addr = HWIF(drive)->pci_dev->dma_mask;
|
|
}
|
|
|
|
if (drive->queue)
|
|
blk_queue_bounce_limit(drive->queue, addr);
|
|
}
|
|
|
|
/**
|
|
* ide_set_xfer_rate - set transfer rate
|
|
* @drive: drive to set
|
|
* @speed: speed to attempt to set
|
|
*
|
|
* General helper for setting the speed of an IDE device. This
|
|
* function knows about user enforced limits from the configuration
|
|
* which speedproc() does not. High level drivers should never
|
|
* invoke speedproc() directly.
|
|
*/
|
|
|
|
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
if (hwif->speedproc == NULL)
|
|
return -1;
|
|
|
|
rate = ide_rate_filter(drive, rate);
|
|
|
|
if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
|
|
if (hwif->set_pio_mode)
|
|
hwif->set_pio_mode(drive, rate - XFER_PIO_0);
|
|
|
|
/*
|
|
* FIXME: this is incorrect to return zero here but
|
|
* since all users of ide_set_xfer_rate() ignore
|
|
* the return value it is not a problem currently
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
return hwif->speedproc(drive, rate);
|
|
}
|
|
|
|
static void ide_dump_opcode(ide_drive_t *drive)
|
|
{
|
|
struct request *rq;
|
|
u8 opcode = 0;
|
|
int found = 0;
|
|
|
|
spin_lock(&ide_lock);
|
|
rq = NULL;
|
|
if (HWGROUP(drive))
|
|
rq = HWGROUP(drive)->rq;
|
|
spin_unlock(&ide_lock);
|
|
if (!rq)
|
|
return;
|
|
if (rq->cmd_type == REQ_TYPE_ATA_CMD ||
|
|
rq->cmd_type == REQ_TYPE_ATA_TASK) {
|
|
char *args = rq->buffer;
|
|
if (args) {
|
|
opcode = args[0];
|
|
found = 1;
|
|
}
|
|
} else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
|
|
ide_task_t *args = rq->special;
|
|
if (args) {
|
|
task_struct_t *tf = (task_struct_t *) args->tfRegister;
|
|
opcode = tf->command;
|
|
found = 1;
|
|
}
|
|
}
|
|
|
|
printk("ide: failed opcode was: ");
|
|
if (!found)
|
|
printk("unknown\n");
|
|
else
|
|
printk("0x%02x\n", opcode);
|
|
}
|
|
|
|
static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long flags;
|
|
u8 err = 0;
|
|
|
|
local_irq_save(flags);
|
|
printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
|
|
if (stat & BUSY_STAT)
|
|
printk("Busy ");
|
|
else {
|
|
if (stat & READY_STAT) printk("DriveReady ");
|
|
if (stat & WRERR_STAT) printk("DeviceFault ");
|
|
if (stat & SEEK_STAT) printk("SeekComplete ");
|
|
if (stat & DRQ_STAT) printk("DataRequest ");
|
|
if (stat & ECC_STAT) printk("CorrectedError ");
|
|
if (stat & INDEX_STAT) printk("Index ");
|
|
if (stat & ERR_STAT) printk("Error ");
|
|
}
|
|
printk("}\n");
|
|
if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
|
|
err = hwif->INB(IDE_ERROR_REG);
|
|
printk("%s: %s: error=0x%02x { ", drive->name, msg, err);
|
|
if (err & ABRT_ERR) printk("DriveStatusError ");
|
|
if (err & ICRC_ERR)
|
|
printk((err & ABRT_ERR) ? "BadCRC " : "BadSector ");
|
|
if (err & ECC_ERR) printk("UncorrectableError ");
|
|
if (err & ID_ERR) printk("SectorIdNotFound ");
|
|
if (err & TRK0_ERR) printk("TrackZeroNotFound ");
|
|
if (err & MARK_ERR) printk("AddrMarkNotFound ");
|
|
printk("}");
|
|
if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR ||
|
|
(err & (ECC_ERR|ID_ERR|MARK_ERR))) {
|
|
if (drive->addressing == 1) {
|
|
__u64 sectors = 0;
|
|
u32 low = 0, high = 0;
|
|
low = ide_read_24(drive);
|
|
hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG);
|
|
high = ide_read_24(drive);
|
|
sectors = ((__u64)high << 24) | low;
|
|
printk(", LBAsect=%llu, high=%d, low=%d",
|
|
(unsigned long long) sectors,
|
|
high, low);
|
|
} else {
|
|
u8 cur = hwif->INB(IDE_SELECT_REG);
|
|
if (cur & 0x40) { /* using LBA? */
|
|
printk(", LBAsect=%ld", (unsigned long)
|
|
((cur&0xf)<<24)
|
|
|(hwif->INB(IDE_HCYL_REG)<<16)
|
|
|(hwif->INB(IDE_LCYL_REG)<<8)
|
|
| hwif->INB(IDE_SECTOR_REG));
|
|
} else {
|
|
printk(", CHS=%d/%d/%d",
|
|
(hwif->INB(IDE_HCYL_REG)<<8) +
|
|
hwif->INB(IDE_LCYL_REG),
|
|
cur & 0xf,
|
|
hwif->INB(IDE_SECTOR_REG));
|
|
}
|
|
}
|
|
if (HWGROUP(drive) && HWGROUP(drive)->rq)
|
|
printk(", sector=%llu",
|
|
(unsigned long long)HWGROUP(drive)->rq->sector);
|
|
}
|
|
printk("\n");
|
|
}
|
|
ide_dump_opcode(drive);
|
|
local_irq_restore(flags);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ide_dump_atapi_status - print human readable atapi status
|
|
* @drive: drive that status applies to
|
|
* @msg: text message to print
|
|
* @stat: status byte to decode
|
|
*
|
|
* Error reporting, in human readable form (luxurious, but a memory hog).
|
|
*/
|
|
|
|
static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat)
|
|
{
|
|
unsigned long flags;
|
|
|
|
atapi_status_t status;
|
|
atapi_error_t error;
|
|
|
|
status.all = stat;
|
|
error.all = 0;
|
|
local_irq_save(flags);
|
|
printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
|
|
if (status.b.bsy)
|
|
printk("Busy ");
|
|
else {
|
|
if (status.b.drdy) printk("DriveReady ");
|
|
if (status.b.df) printk("DeviceFault ");
|
|
if (status.b.dsc) printk("SeekComplete ");
|
|
if (status.b.drq) printk("DataRequest ");
|
|
if (status.b.corr) printk("CorrectedError ");
|
|
if (status.b.idx) printk("Index ");
|
|
if (status.b.check) printk("Error ");
|
|
}
|
|
printk("}\n");
|
|
if (status.b.check && !status.b.bsy) {
|
|
error.all = HWIF(drive)->INB(IDE_ERROR_REG);
|
|
printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all);
|
|
if (error.b.ili) printk("IllegalLengthIndication ");
|
|
if (error.b.eom) printk("EndOfMedia ");
|
|
if (error.b.abrt) printk("AbortedCommand ");
|
|
if (error.b.mcr) printk("MediaChangeRequested ");
|
|
if (error.b.sense_key) printk("LastFailedSense=0x%02x ",
|
|
error.b.sense_key);
|
|
printk("}\n");
|
|
}
|
|
ide_dump_opcode(drive);
|
|
local_irq_restore(flags);
|
|
return error.all;
|
|
}
|
|
|
|
/**
|
|
* ide_dump_status - translate ATA/ATAPI error
|
|
* @drive: drive the error occured on
|
|
* @msg: information string
|
|
* @stat: status byte
|
|
*
|
|
* Error reporting, in human readable form (luxurious, but a memory hog).
|
|
* Combines the drive name, message and status byte to provide a
|
|
* user understandable explanation of the device error.
|
|
*/
|
|
|
|
u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
|
|
{
|
|
if (drive->media == ide_disk)
|
|
return ide_dump_ata_status(drive, msg, stat);
|
|
return ide_dump_atapi_status(drive, msg, stat);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ide_dump_status);
|
|
|