You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
809 lines
22 KiB
809 lines
22 KiB
/*
|
|
* Support for LGDT3302 and LGDT3303 - VSB/QAM
|
|
*
|
|
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* NOTES ABOUT THIS DRIVER
|
|
*
|
|
* This Linux driver supports:
|
|
* DViCO FusionHDTV 3 Gold-Q
|
|
* DViCO FusionHDTV 3 Gold-T
|
|
* DViCO FusionHDTV 5 Gold
|
|
* DViCO FusionHDTV 5 Lite
|
|
* DViCO FusionHDTV 5 USB Gold
|
|
* Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
|
|
*
|
|
* TODO:
|
|
* signal strength always returns 0.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "lgdt330x_priv.h"
|
|
#include "lgdt330x.h"
|
|
|
|
static int debug = 0;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "lgdt330x: " args); \
|
|
} while (0)
|
|
|
|
struct lgdt330x_state
|
|
{
|
|
struct i2c_adapter* i2c;
|
|
struct dvb_frontend_ops ops;
|
|
|
|
/* Configuration settings */
|
|
const struct lgdt330x_config* config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
/* Demodulator private data */
|
|
fe_modulation_t current_modulation;
|
|
|
|
/* Tuner private data */
|
|
u32 current_frequency;
|
|
};
|
|
|
|
static int i2c_write_demod_bytes (struct lgdt330x_state* state,
|
|
u8 *buf, /* data bytes to send */
|
|
int len /* number of bytes to send */ )
|
|
{
|
|
struct i2c_msg msg =
|
|
{ .addr = state->config->demod_address,
|
|
.flags = 0,
|
|
.buf = buf,
|
|
.len = 2 };
|
|
int i;
|
|
int err;
|
|
|
|
for (i=0; i<len-1; i+=2){
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err);
|
|
if (err < 0)
|
|
return err;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
msg.buf += 2;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This routine writes the register (reg) to the demod bus
|
|
* then reads the data returned for (len) bytes.
|
|
*/
|
|
|
|
static u8 i2c_read_demod_bytes (struct lgdt330x_state* state,
|
|
enum I2C_REG reg, u8* buf, int len)
|
|
{
|
|
u8 wr [] = { reg };
|
|
struct i2c_msg msg [] = {
|
|
{ .addr = state->config->demod_address,
|
|
.flags = 0, .buf = wr, .len = 1 },
|
|
{ .addr = state->config->demod_address,
|
|
.flags = I2C_M_RD, .buf = buf, .len = len },
|
|
};
|
|
int ret;
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
if (ret != 2) {
|
|
printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Software reset */
|
|
static int lgdt3302_SwReset(struct lgdt330x_state* state)
|
|
{
|
|
u8 ret;
|
|
u8 reset[] = {
|
|
IRQ_MASK,
|
|
0x00 /* bit 6 is active low software reset
|
|
* bits 5-0 are 1 to mask interrupts */
|
|
};
|
|
|
|
ret = i2c_write_demod_bytes(state,
|
|
reset, sizeof(reset));
|
|
if (ret == 0) {
|
|
|
|
/* force reset high (inactive) and unmask interrupts */
|
|
reset[1] = 0x7f;
|
|
ret = i2c_write_demod_bytes(state,
|
|
reset, sizeof(reset));
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lgdt3303_SwReset(struct lgdt330x_state* state)
|
|
{
|
|
u8 ret;
|
|
u8 reset[] = {
|
|
0x02,
|
|
0x00 /* bit 0 is active low software reset */
|
|
};
|
|
|
|
ret = i2c_write_demod_bytes(state,
|
|
reset, sizeof(reset));
|
|
if (ret == 0) {
|
|
|
|
/* force reset high (inactive) */
|
|
reset[1] = 0x01;
|
|
ret = i2c_write_demod_bytes(state,
|
|
reset, sizeof(reset));
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lgdt330x_SwReset(struct lgdt330x_state* state)
|
|
{
|
|
switch (state->config->demod_chip) {
|
|
case LGDT3302:
|
|
return lgdt3302_SwReset(state);
|
|
case LGDT3303:
|
|
return lgdt3303_SwReset(state);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static int lgdt330x_init(struct dvb_frontend* fe)
|
|
{
|
|
/* Hardware reset is done using gpio[0] of cx23880x chip.
|
|
* I'd like to do it here, but don't know how to find chip address.
|
|
* cx88-cards.c arranges for the reset bit to be inactive (high).
|
|
* Maybe there needs to be a callable function in cx88-core or
|
|
* the caller of this function needs to do it. */
|
|
|
|
/*
|
|
* Array of byte pairs <address, value>
|
|
* to initialize each different chip
|
|
*/
|
|
static u8 lgdt3302_init_data[] = {
|
|
/* Use 50MHz parameter values from spec sheet since xtal is 50 */
|
|
/* Change the value of NCOCTFV[25:0] of carrier
|
|
recovery center frequency register */
|
|
VSB_CARRIER_FREQ0, 0x00,
|
|
VSB_CARRIER_FREQ1, 0x87,
|
|
VSB_CARRIER_FREQ2, 0x8e,
|
|
VSB_CARRIER_FREQ3, 0x01,
|
|
/* Change the TPCLK pin polarity
|
|
data is valid on falling clock */
|
|
DEMUX_CONTROL, 0xfb,
|
|
/* Change the value of IFBW[11:0] of
|
|
AGC IF/RF loop filter bandwidth register */
|
|
AGC_RF_BANDWIDTH0, 0x40,
|
|
AGC_RF_BANDWIDTH1, 0x93,
|
|
AGC_RF_BANDWIDTH2, 0x00,
|
|
/* Change the value of bit 6, 'nINAGCBY' and
|
|
'NSSEL[1:0] of ACG function control register 2 */
|
|
AGC_FUNC_CTRL2, 0xc6,
|
|
/* Change the value of bit 6 'RFFIX'
|
|
of AGC function control register 3 */
|
|
AGC_FUNC_CTRL3, 0x40,
|
|
/* Set the value of 'INLVTHD' register 0x2a/0x2c
|
|
to 0x7fe */
|
|
AGC_DELAY0, 0x07,
|
|
AGC_DELAY2, 0xfe,
|
|
/* Change the value of IAGCBW[15:8]
|
|
of inner AGC loop filter bandwith */
|
|
AGC_LOOP_BANDWIDTH0, 0x08,
|
|
AGC_LOOP_BANDWIDTH1, 0x9a
|
|
};
|
|
|
|
static u8 lgdt3303_init_data[] = {
|
|
0x4c, 0x14
|
|
};
|
|
|
|
static u8 flip_lgdt3303_init_data[] = {
|
|
0x4c, 0x14,
|
|
0x87, 0xf3
|
|
};
|
|
|
|
struct lgdt330x_state* state = fe->demodulator_priv;
|
|
char *chip_name;
|
|
int err;
|
|
|
|
switch (state->config->demod_chip) {
|
|
case LGDT3302:
|
|
chip_name = "LGDT3302";
|
|
err = i2c_write_demod_bytes(state, lgdt3302_init_data,
|
|
sizeof(lgdt3302_init_data));
|
|
break;
|
|
case LGDT3303:
|
|
chip_name = "LGDT3303";
|
|
if (state->config->clock_polarity_flip) {
|
|
err = i2c_write_demod_bytes(state, flip_lgdt3303_init_data,
|
|
sizeof(flip_lgdt3303_init_data));
|
|
} else {
|
|
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
|
|
sizeof(lgdt3303_init_data));
|
|
}
|
|
break;
|
|
default:
|
|
chip_name = "undefined";
|
|
printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
|
|
err = -ENODEV;
|
|
}
|
|
dprintk("%s entered as %s\n", __FUNCTION__, chip_name);
|
|
if (err < 0)
|
|
return err;
|
|
return lgdt330x_SwReset(state);
|
|
}
|
|
|
|
static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
*ber = 0; /* Not supplied by the demod chips */
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct lgdt330x_state* state = fe->demodulator_priv;
|
|
int err;
|
|
u8 buf[2];
|
|
|
|
switch (state->config->demod_chip) {
|
|
case LGDT3302:
|
|
err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
|
|
buf, sizeof(buf));
|
|
break;
|
|
case LGDT3303:
|
|
err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
|
|
buf, sizeof(buf));
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING
|
|
"Only LGDT3302 and LGDT3303 are supported chips.\n");
|
|
err = -ENODEV;
|
|
}
|
|
|
|
*ucblocks = (buf[0] << 8) | buf[1];
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt330x_set_parameters(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *param)
|
|
{
|
|
/*
|
|
* Array of byte pairs <address, value>
|
|
* to initialize 8VSB for lgdt3303 chip 50 MHz IF
|
|
*/
|
|
static u8 lgdt3303_8vsb_44_data[] = {
|
|
0x04, 0x00,
|
|
0x0d, 0x40,
|
|
0x0e, 0x87,
|
|
0x0f, 0x8e,
|
|
0x10, 0x01,
|
|
0x47, 0x8b };
|
|
|
|
/*
|
|
* Array of byte pairs <address, value>
|
|
* to initialize QAM for lgdt3303 chip
|
|
*/
|
|
static u8 lgdt3303_qam_data[] = {
|
|
0x04, 0x00,
|
|
0x0d, 0x00,
|
|
0x0e, 0x00,
|
|
0x0f, 0x00,
|
|
0x10, 0x00,
|
|
0x51, 0x63,
|
|
0x47, 0x66,
|
|
0x48, 0x66,
|
|
0x4d, 0x1a,
|
|
0x49, 0x08,
|
|
0x4a, 0x9b };
|
|
|
|
struct lgdt330x_state* state = fe->demodulator_priv;
|
|
|
|
static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
|
|
|
|
int err;
|
|
/* Change only if we are actually changing the modulation */
|
|
if (state->current_modulation != param->u.vsb.modulation) {
|
|
switch(param->u.vsb.modulation) {
|
|
case VSB_8:
|
|
dprintk("%s: VSB_8 MODE\n", __FUNCTION__);
|
|
|
|
/* Select VSB mode */
|
|
top_ctrl_cfg[1] = 0x03;
|
|
|
|
/* Select ANT connector if supported by card */
|
|
if (state->config->pll_rf_set)
|
|
state->config->pll_rf_set(fe, 1);
|
|
|
|
if (state->config->demod_chip == LGDT3303) {
|
|
err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
|
|
sizeof(lgdt3303_8vsb_44_data));
|
|
}
|
|
break;
|
|
|
|
case QAM_64:
|
|
dprintk("%s: QAM_64 MODE\n", __FUNCTION__);
|
|
|
|
/* Select QAM_64 mode */
|
|
top_ctrl_cfg[1] = 0x00;
|
|
|
|
/* Select CABLE connector if supported by card */
|
|
if (state->config->pll_rf_set)
|
|
state->config->pll_rf_set(fe, 0);
|
|
|
|
if (state->config->demod_chip == LGDT3303) {
|
|
err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
|
|
sizeof(lgdt3303_qam_data));
|
|
}
|
|
break;
|
|
|
|
case QAM_256:
|
|
dprintk("%s: QAM_256 MODE\n", __FUNCTION__);
|
|
|
|
/* Select QAM_256 mode */
|
|
top_ctrl_cfg[1] = 0x01;
|
|
|
|
/* Select CABLE connector if supported by card */
|
|
if (state->config->pll_rf_set)
|
|
state->config->pll_rf_set(fe, 0);
|
|
|
|
if (state->config->demod_chip == LGDT3303) {
|
|
err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
|
|
sizeof(lgdt3303_qam_data));
|
|
}
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation);
|
|
return -1;
|
|
}
|
|
/*
|
|
* select serial or parallel MPEG harware interface
|
|
* Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303
|
|
* Parallel: 0x00
|
|
*/
|
|
top_ctrl_cfg[1] |= state->config->serial_mpeg;
|
|
|
|
/* Select the requested mode */
|
|
i2c_write_demod_bytes(state, top_ctrl_cfg,
|
|
sizeof(top_ctrl_cfg));
|
|
if (state->config->set_ts_params)
|
|
state->config->set_ts_params(fe, 0);
|
|
state->current_modulation = param->u.vsb.modulation;
|
|
}
|
|
|
|
/* Tune to the specified frequency */
|
|
if (state->config->pll_set)
|
|
state->config->pll_set(fe, param);
|
|
|
|
/* Keep track of the new frequency */
|
|
/* FIXME this is the wrong way to do this... */
|
|
/* The tuner is shared with the video4linux analog API */
|
|
state->current_frequency = param->frequency;
|
|
|
|
lgdt330x_SwReset(state);
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt330x_get_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters* param)
|
|
{
|
|
struct lgdt330x_state *state = fe->demodulator_priv;
|
|
param->frequency = state->current_frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct lgdt330x_state* state = fe->demodulator_priv;
|
|
u8 buf[3];
|
|
|
|
*status = 0; /* Reset status result */
|
|
|
|
/* AGC status register */
|
|
i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
|
|
dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
if ((buf[0] & 0x0c) == 0x8){
|
|
/* Test signal does not exist flag */
|
|
/* as well as the AGC lock flag. */
|
|
*status |= FE_HAS_SIGNAL;
|
|
} else {
|
|
/* Without a signal all other status bits are meaningless */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* You must set the Mask bits to 1 in the IRQ_MASK in order
|
|
* to see that status bit in the IRQ_STATUS register.
|
|
* This is done in SwReset();
|
|
*/
|
|
/* signal status */
|
|
i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
|
|
dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]);
|
|
|
|
|
|
/* sync status */
|
|
if ((buf[2] & 0x03) == 0x01) {
|
|
*status |= FE_HAS_SYNC;
|
|
}
|
|
|
|
/* FEC error status */
|
|
if ((buf[2] & 0x0c) == 0x08) {
|
|
*status |= FE_HAS_LOCK;
|
|
*status |= FE_HAS_VITERBI;
|
|
}
|
|
|
|
/* Carrier Recovery Lock Status Register */
|
|
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
|
|
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
switch (state->current_modulation) {
|
|
case QAM_256:
|
|
case QAM_64:
|
|
/* Need to undestand why there are 3 lock levels here */
|
|
if ((buf[0] & 0x07) == 0x07)
|
|
*status |= FE_HAS_CARRIER;
|
|
break;
|
|
case VSB_8:
|
|
if ((buf[0] & 0x80) == 0x80)
|
|
*status |= FE_HAS_CARRIER;
|
|
break;
|
|
default:
|
|
printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct lgdt330x_state* state = fe->demodulator_priv;
|
|
int err;
|
|
u8 buf[3];
|
|
|
|
*status = 0; /* Reset status result */
|
|
|
|
/* lgdt3303 AGC status register */
|
|
err = i2c_read_demod_bytes(state, 0x58, buf, 1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
if ((buf[0] & 0x21) == 0x01){
|
|
/* Test input signal does not exist flag */
|
|
/* as well as the AGC lock flag. */
|
|
*status |= FE_HAS_SIGNAL;
|
|
} else {
|
|
/* Without a signal all other status bits are meaningless */
|
|
return 0;
|
|
}
|
|
|
|
/* Carrier Recovery Lock Status Register */
|
|
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
|
|
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
switch (state->current_modulation) {
|
|
case QAM_256:
|
|
case QAM_64:
|
|
/* Need to undestand why there are 3 lock levels here */
|
|
if ((buf[0] & 0x07) == 0x07)
|
|
*status |= FE_HAS_CARRIER;
|
|
else
|
|
break;
|
|
i2c_read_demod_bytes(state, 0x8a, buf, 1);
|
|
if ((buf[0] & 0x04) == 0x04)
|
|
*status |= FE_HAS_SYNC;
|
|
if ((buf[0] & 0x01) == 0x01)
|
|
*status |= FE_HAS_LOCK;
|
|
if ((buf[0] & 0x08) == 0x08)
|
|
*status |= FE_HAS_VITERBI;
|
|
break;
|
|
case VSB_8:
|
|
if ((buf[0] & 0x80) == 0x80)
|
|
*status |= FE_HAS_CARRIER;
|
|
else
|
|
break;
|
|
i2c_read_demod_bytes(state, 0x38, buf, 1);
|
|
if ((buf[0] & 0x02) == 0x00)
|
|
*status |= FE_HAS_SYNC;
|
|
if ((buf[0] & 0x01) == 0x01) {
|
|
*status |= FE_HAS_LOCK;
|
|
*status |= FE_HAS_VITERBI;
|
|
}
|
|
break;
|
|
default:
|
|
printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
/* not directly available. */
|
|
*strength = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
#ifdef SNR_IN_DB
|
|
/*
|
|
* Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise)
|
|
* and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker
|
|
* respectively. The following tables are built on these formulas.
|
|
* The usual definition is SNR = 20 log10(signal/noise)
|
|
* If the specification is wrong the value retuned is 1/2 the actual SNR in db.
|
|
*
|
|
* This table is a an ordered list of noise values computed by the
|
|
* formula from the spec sheet such that the index into the table
|
|
* starting at 43 or 45 is the SNR value in db. There are duplicate noise
|
|
* value entries at the beginning because the SNR varies more than
|
|
* 1 db for a change of 1 digit in noise at very small values of noise.
|
|
*
|
|
* Examples from SNR_EQ table:
|
|
* noise SNR
|
|
* 0 43
|
|
* 1 42
|
|
* 2 39
|
|
* 3 37
|
|
* 4 36
|
|
* 5 35
|
|
* 6 34
|
|
* 7 33
|
|
* 8 33
|
|
* 9 32
|
|
* 10 32
|
|
* 11 31
|
|
* 12 31
|
|
* 13 30
|
|
*/
|
|
|
|
static const u32 SNR_EQ[] =
|
|
{ 1, 2, 2, 2, 3, 3, 4, 4, 5, 7,
|
|
9, 11, 13, 17, 21, 26, 33, 41, 52, 65,
|
|
81, 102, 129, 162, 204, 257, 323, 406, 511, 644,
|
|
810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433,
|
|
8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323,
|
|
80978, 101945, 128341, 161571, 203406, 256073, 0x40000
|
|
};
|
|
|
|
static const u32 SNR_PH[] =
|
|
{ 1, 2, 2, 2, 3, 3, 4, 5, 6, 8,
|
|
10, 12, 15, 19, 23, 29, 37, 46, 58, 73,
|
|
91, 115, 144, 182, 229, 288, 362, 456, 574, 722,
|
|
909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216,
|
|
9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151,
|
|
90833, 114351, 143960, 181235, 228161, 0x080000
|
|
};
|
|
|
|
static u8 buf[5];/* read data buffer */
|
|
static u32 noise; /* noise value */
|
|
static u32 snr_db; /* index into SNR_EQ[] */
|
|
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
|
|
|
|
/* read both equalizer and phase tracker noise data */
|
|
i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
|
|
|
|
if (state->current_modulation == VSB_8) {
|
|
/* Equalizer Mean-Square Error Register for VSB */
|
|
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
|
|
|
|
/*
|
|
* Look up noise value in table.
|
|
* A better search algorithm could be used...
|
|
* watch out there are duplicate entries.
|
|
*/
|
|
for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) {
|
|
if (noise < SNR_EQ[snr_db]) {
|
|
*snr = 43 - snr_db;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/* Phase Tracker Mean-Square Error Register for QAM */
|
|
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
|
|
|
|
/* Look up noise value in table. */
|
|
for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) {
|
|
if (noise < SNR_PH[snr_db]) {
|
|
*snr = 45 - snr_db;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
/* Return the raw noise value */
|
|
static u8 buf[5];/* read data buffer */
|
|
static u32 noise; /* noise value */
|
|
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
|
|
|
|
/* read both equalizer and pase tracker noise data */
|
|
i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
|
|
|
|
if (state->current_modulation == VSB_8) {
|
|
/* Phase Tracker Mean-Square Error Register for VSB */
|
|
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
|
|
} else {
|
|
|
|
/* Carrier Recovery Mean-Square Error for QAM */
|
|
i2c_read_demod_bytes(state, 0x1a, buf, 2);
|
|
noise = ((buf[0] & 3) << 8) | buf[1];
|
|
}
|
|
|
|
/* Small values for noise mean signal is better so invert noise */
|
|
*snr = ~noise;
|
|
#endif
|
|
|
|
dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
/* Return the raw noise value */
|
|
static u8 buf[5];/* read data buffer */
|
|
static u32 noise; /* noise value */
|
|
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
|
|
|
|
if (state->current_modulation == VSB_8) {
|
|
|
|
/* Phase Tracker Mean-Square Error Register for VSB */
|
|
noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
|
|
} else {
|
|
|
|
/* Carrier Recovery Mean-Square Error for QAM */
|
|
i2c_read_demod_bytes(state, 0x1a, buf, 2);
|
|
noise = (buf[0] << 8) | buf[1];
|
|
}
|
|
|
|
/* Small values for noise mean signal is better so invert noise */
|
|
*snr = ~noise;
|
|
|
|
dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
|
|
{
|
|
/* I have no idea about this - it may not be needed */
|
|
fe_tune_settings->min_delay_ms = 500;
|
|
fe_tune_settings->step_size = 0;
|
|
fe_tune_settings->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void lgdt330x_release(struct dvb_frontend* fe)
|
|
{
|
|
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops lgdt3302_ops;
|
|
static struct dvb_frontend_ops lgdt3303_ops;
|
|
|
|
struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct lgdt330x_state* state = NULL;
|
|
u8 buf[1];
|
|
|
|
/* Allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct lgdt330x_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* Setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
switch (config->demod_chip) {
|
|
case LGDT3302:
|
|
memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops));
|
|
break;
|
|
case LGDT3303:
|
|
memcpy(&state->ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops));
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
|
|
/* Verify communication with demod chip */
|
|
if (i2c_read_demod_bytes(state, 2, buf, 1))
|
|
goto error;
|
|
|
|
state->current_frequency = -1;
|
|
state->current_modulation = -1;
|
|
|
|
/* Create dvb_frontend */
|
|
state->frontend.ops = &state->ops;
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
dprintk("%s: ERROR\n",__FUNCTION__);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops lgdt3302_ops = {
|
|
.info = {
|
|
.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
|
|
.type = FE_ATSC,
|
|
.frequency_min= 54000000,
|
|
.frequency_max= 858000000,
|
|
.frequency_stepsize= 62500,
|
|
.symbol_rate_min = 5056941, /* QAM 64 */
|
|
.symbol_rate_max = 10762000, /* VSB 8 */
|
|
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
|
|
},
|
|
.init = lgdt330x_init,
|
|
.set_frontend = lgdt330x_set_parameters,
|
|
.get_frontend = lgdt330x_get_frontend,
|
|
.get_tune_settings = lgdt330x_get_tune_settings,
|
|
.read_status = lgdt3302_read_status,
|
|
.read_ber = lgdt330x_read_ber,
|
|
.read_signal_strength = lgdt330x_read_signal_strength,
|
|
.read_snr = lgdt3302_read_snr,
|
|
.read_ucblocks = lgdt330x_read_ucblocks,
|
|
.release = lgdt330x_release,
|
|
};
|
|
|
|
static struct dvb_frontend_ops lgdt3303_ops = {
|
|
.info = {
|
|
.name= "LG Electronics LGDT3303 VSB/QAM Frontend",
|
|
.type = FE_ATSC,
|
|
.frequency_min= 54000000,
|
|
.frequency_max= 858000000,
|
|
.frequency_stepsize= 62500,
|
|
.symbol_rate_min = 5056941, /* QAM 64 */
|
|
.symbol_rate_max = 10762000, /* VSB 8 */
|
|
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
|
|
},
|
|
.init = lgdt330x_init,
|
|
.set_frontend = lgdt330x_set_parameters,
|
|
.get_frontend = lgdt330x_get_frontend,
|
|
.get_tune_settings = lgdt330x_get_tune_settings,
|
|
.read_status = lgdt3303_read_status,
|
|
.read_ber = lgdt330x_read_ber,
|
|
.read_signal_strength = lgdt330x_read_signal_strength,
|
|
.read_snr = lgdt3303_read_snr,
|
|
.read_ucblocks = lgdt330x_read_ucblocks,
|
|
.release = lgdt330x_release,
|
|
};
|
|
|
|
MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
|
|
MODULE_AUTHOR("Wilson Michaels");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(lgdt330x_attach);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|
|
|