You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Paul Mackerras 1189be6508 [POWERPC] Use 1TB segments ... This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>		18 years ago
..
iseries	[POWERPC] iSeries: Move viodasd probing	18 years ago
8xx_immap.h	[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need	18 years ago
8253pit.h	…
Kbuild	…
a.out.h	arch: personality independent stack top	18 years ago
abs_addr.h	…
agp.h	…
asm-compat.h	…
atomic.h	[POWERPC] Implement atomic{, 64}_{read, write}() without volatile	18 years ago
auxvec.h	…
backlight.h	…
bitops.h	…
bootx.h	…
btext.h	…
bug.h	Fix WARN_ON() on bitfield ops	18 years ago
bugs.h	…
byteorder.h	…
cache.h	…
cacheflush.h	…
cell-pmu.h	…
cell-regs.h	[POWERPC] cell: Add Cell memory controller register defs and expose it	18 years ago
checksum.h	…
clk_interface.h	[POWERPC] clk.h interface for platforms	18 years ago
commproc.h	[POWERPC] cpm: Describe multi-user ram in its own device node.	18 years ago
compat.h	…
cpm.h	[POWERPC] cpm: Describe multi-user ram in its own device node.	18 years ago
cpm2.h	[POWERPC] 85xx: Killed <asm/mpc85xx.h>	18 years ago
cputable.h	[POWERPC] Use 1TB segments	18 years ago
cputime.h	…
current.h	…
dbdma.h	…
dcr-mmio.h	[POWERPC] Store the base address in dcr_host_t	18 years ago
dcr-native.h	[POWERPC] Store the base address in dcr_host_t	18 years ago
dcr.h	…
delay.h	…
device.h	…
div64.h	…
dma-mapping.h	[POWERPC] Replace a few #defines with empty inline functions	18 years ago
dma.h	…
edac.h	…
eeh.h	…
eeh_event.h	…
elf.h	[POWERPC] spufs: Cleanup ELF coredump extra notes logic	18 years ago
emergency-restart.h	…
errno.h	…
exception.h	[POWERPC] Move lowlevel runlatch calls under cpu feature control	18 years ago
fb.h	fbdev: detect primary display device	18 years ago
fcntl.h	…
firmware.h	…
floppy.h	…
fs_pd.h	[POWERPC] 85xx: Killed <asm/mpc85xx.h>	18 years ago
futex.h	…
grackle.h	…
hardirq.h	…
heathrow.h	…
highmem.h	[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need	18 years ago
hvcall.h	…
hvconsole.h	…
hvcserver.h	…
hw_irq.h	…
hydra.h	[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need	18 years ago
i8259.h	…
ibmebus.h	…
ide.h	[POWERPC] Remove APUS support from arch/ppc	18 years ago
immap_86xx.h	[POWERPC] 86xx: update immap_86xx.h for the 8610	18 years ago
immap_cpm2.h	[POWERPC] cpm2: Infrastructure code cleanup.	18 years ago
immap_qe.h	[POWERPC] qe: miscellaneous code improvements and fixes to the QE library	18 years ago
io-defs.h	…
io.h	[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT	18 years ago
ioctl.h	…
ioctls.h	…
iommu.h	…
ipc.h	…
ipcbuf.h	…
ipic.h	…
irq.h	[POWERPC] Add an optional device_node pointer to the irq_host	18 years ago
irq_regs.h	…
irqflags.h	…
kdebug.h	…
kdump.h	…
kexec.h	…
keylargo.h	…
kgdb.h	[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need	18 years ago
kmap_types.h	…
kprobes.h	jprobes: remove JPROBE_ENTRY()	18 years ago
libata-portmap.h	…
linkage.h	…
lmb.h	[POWERPC] Update lmb.h include protection to ASM_POWERPC	18 years ago
local.h	…
lppaca.h	…
lv1call.h	…
machdep.h	[POWERPC] Use 1TB segments	18 years ago
macio.h	…
mc146818rtc.h	…
mediabay.h	…
mman.h	…
mmu-8xx.h	…
mmu-40x.h	[POWERPC] 40x MMU	18 years ago
mmu-44x.h	…
mmu-fsl-booke.h	…
mmu-hash32.h	…
mmu-hash64.h	[POWERPC] Use 1TB segments	18 years ago
mmu.h	[POWERPC] 40x MMU	18 years ago
mmu_context.h	…
mmzone.h	…
module.h	…
mpc8xx.h	…
mpc52xx.h	[POWERPC] MPC5200: Don't make firmware fixups into common code	18 years ago
mpc52xx_psc.h	[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need	18 years ago
mpc86xx.h	…
mpc8260.h	…
mpic.h	[POWERPC] Update mpic to use dcr_host_t.base	18 years ago
msgbuf.h	…
mutex.h	…
namei.h	…
nvram.h	[POWERPC] pseries: Eliminate global error_log_cnt variable	18 years ago
of_device.h	Begin consolidation of of_device.h	18 years ago
of_platform.h	Create linux/of_platorm.h	18 years ago
ohare.h	…
oprofile_impl.h	[CELL] oprofile: add support to OProfile for profiling CELL BE SPUs	18 years ago
pSeries_reconfig.h	…
paca.h	[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT	18 years ago
page.h	fix 'dynreloc miscount' link error on Powerpc	18 years ago
page_32.h	…
page_64.h	[POWERPC] Use 1TB segments	18 years ago
param.h	…
parport.h	…
pci-bridge.h	[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci	18 years ago
pci.h	…
percpu.h	[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT	18 years ago
pgalloc-32.h	…
pgalloc-64.h	…
pgalloc.h	…
pgtable-4k.h	[POWERPC] Size swapper_pg_dir correctly	18 years ago
pgtable-64k.h	[POWERPC] Size swapper_pg_dir correctly	18 years ago
pgtable-ppc32.h	mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirty	18 years ago
pgtable-ppc64.h	mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirty	18 years ago
pgtable.h	…
pmac_feature.h	…
pmac_low_i2c.h	…
pmac_pfunc.h	…
pmc.h	…
pmi.h	[CELL] pmi: remove support for mutiple devices.	18 years ago
poll.h	…
posix_types.h	…
ppc-pci.h	…
ppc_asm.h	[POWERPC] Fix modpost warnings from head*.S on ppc32	18 years ago
processor.h	[POWERPC] Use __attribute__ in asm-powerpc	18 years ago
prom.h	[POWERPC] Use strcasecmp() rather than strncasecmp() when determining device node compatibility	18 years ago
ps3.h	[POWERPC] PS3: Add new LV1 error codes	18 years ago
ps3av.h	…
ps3fb.h	…
ps3stor.h	…
ptrace.h	…
qe.h	[POWERPC] qe: miscellaneous code improvements and fixes to the QE library	18 years ago
qe_ic.h	[POWERPC] QEIC: Implement pluggable handlers, fix MPIC cascading	18 years ago
reg.h	[POWERPC] Remove APUS support from arch/ppc	18 years ago
reg_8xx.h	…
reg_booke.h	[POWERPC] Fix FSL BookE machine check reporting	18 years ago
resource.h	…
rheap.h	…
rtas.h	…
rtc.h	…
rwsem.h	[POWERPC] Prevent direct inclusion of <asm/rwsem.h>.	18 years ago
scatterlist.h	…
seccomp.h	…
sections.h	…
semaphore.h	…
sembuf.h	…
serial.h	…
setup.h	…
shmbuf.h	…
shmparam.h	…
sigcontext.h	…
siginfo.h	…
signal.h	…
smp.h	[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT	18 years ago
smu.h	…
socket.h	…
sockios.h	…
sparsemem.h	…
spinlock.h	…
spinlock_types.h	…
spu.h	[POWERPC] spufs: Handle errors in SPU coredump code, and support coredump to a pipe	18 years ago
spu_csa.h	[CELL] spufs: fix decr_status meanings	18 years ago
spu_info.h	…
spu_priv1.h	[POWERPC] cell: Move SPU affinity init to spu_management_of_ops	18 years ago
sstep.h	…
stat.h	…
statfs.h	…
string.h	…
suspend.h	…
synch.h	…
syscalls.h	…
systbl.h	sys_fallocate() implementation on i386, x86_64 and powerpc	18 years ago
system.h	[POWERPC] Limit range of __init_ref_ok somewhat	18 years ago
tce.h	…
termbits.h	…
termios.h	…
thread_info.h	remove unused TIF_NOTIFY_RESUME flag	18 years ago
time.h	[POWERPC] Implement clockevents driver for powerpc	18 years ago
timex.h	…
tlb.h	[POWERPC] Include pagemap.h in asm/powerpc/tlb.h	18 years ago
tlbflush.h	[POWERPC] Use 1TB segments	18 years ago
topology.h	…
tsi108.h	…
tsi108_irq.h	…
tsi108_pci.h	…
types.h	[POWERPC] Use __attribute__ in asm-powerpc	18 years ago
uaccess.h	…
ucc.h	[POWERPC] qe: miscellaneous code improvements and fixes to the QE library	18 years ago
ucc_fast.h	…
ucc_slow.h	[POWERPC] qe: miscellaneous code improvements and fixes to the QE library	18 years ago
ucontext.h	…
udbg.h	[POWERPC] Add early debug console for CPM serial ports.	18 years ago
uic.h	…
unaligned.h	…
uninorth.h	…
unistd.h	sys_fallocate() implementation on i386, x86_64 and powerpc	18 years ago
user.h	…
vdso.h	…
vdso_datapage.h	…
vga.h	…
vio.h	[POWERPC] Clean up vio.h	18 years ago
xilinx_intc.h	[POWERPC] Virtex: add xilinx interrupt controller driver	18 years ago
xmon.h	…
xor.h	…