You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

York Sun 9b53a9e28a fbdev: powerpc: driver for Freescale 8610 and 5121 DIU ... The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		17 years ago
..
adder875-redboot.dts	[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts	17 years ago
adder875-uboot.dts	[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts	17 years ago
bamboo.dts	[POWERPC] Start removing linux,network-index in favour of aliases	17 years ago
canyonlands.dts	[POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts	17 years ago
cm5200.dts	[POWERPC] mpc5200: Amalgamated DTS fixes and updates	17 years ago
ebony.dts	[POWERPC] Start removing linux,network-index in favour of aliases	17 years ago
ep88xc.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
ep405.dts	[POWERPC] 4xx: Add aliases node to 4xx dts files	17 years ago
ep8248e.dts	[POWERPC] ep8248e: Reference SMC parameter RAM base in the device tree.	17 years ago
glacier.dts	[POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts	17 years ago
haleakala.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
holly.dts	[POWERPC] DTS cleanup	18 years ago
katmai.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
kilauea.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
ksi8560.dts	[POWERPC] 85xx: Emerson KSI8560 device tree	17 years ago
kuroboxHD.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
kuroboxHG.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
lite5200.dts	[POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works	17 years ago
lite5200b.dts	[POWERPC] mpc5200: Fix incorrect compatible string for the mdio node	17 years ago
makalu.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
motionpro.dts	[POWERPC] mpc5200: Amalgamated DTS fixes and updates	17 years ago
mpc832x_mds.dts	[POWERPC] QE: UCC nodes cleanup	17 years ago
mpc832x_rdb.dts	[POWERPC] QE: UCC nodes cleanup	17 years ago
mpc834x_mds.dts	[POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dts	17 years ago
mpc836x_mds.dts	[POWERPC] QE: UCC nodes cleanup	17 years ago
mpc866ads.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
mpc885ads.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
mpc5121ads.dts	[POWERPC] mpc512x: Device tree for MPC5121 ADS	17 years ago
mpc7448hpc2.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
mpc8272ads.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
mpc8313erdb.dts	[POWERPC] 83xx: Add rtc node to mpc8313erdb dts	17 years ago
mpc8315erdb.dts	[POWERPC] 83xx: configure USB clock for MPC8315E	17 years ago
mpc8349emitx.dts	[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.	17 years ago
mpc8349emitxgp.dts	[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.	17 years ago
mpc8377_mds.dts	[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata	17 years ago
mpc8377_rdb.dts	[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts	17 years ago
mpc8378_mds.dts	[POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees.	17 years ago
mpc8378_rdb.dts	[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts	17 years ago
mpc8379_mds.dts	[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata	17 years ago
mpc8379_rdb.dts	[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts	17 years ago
mpc8540ads.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8541cds.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8544ds.dts	[POWERPC] 85xx: minor .dts cleanups	17 years ago
mpc8548cds.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8555cds.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8560ads.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8568mds.dts	[POWERPC] 85xx: Fix the size of qe muram for MPC8568E	17 years ago
mpc8572ds.dts	[POWERPC] 85xx: Convert dts to v1 syntax	17 years ago
mpc8610_hpcd.dts	fbdev: powerpc: driver for Freescale 8610 and 5121 DIU	17 years ago
mpc8641_hpcn.dts	[POWERPC] 86xx: mark functions static, other minor cleanups	17 years ago
pq2fads.dts	[POWERPC] fsl: Convert dts to v1 syntax	17 years ago
prpmc2800.dts	[POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks	17 years ago
ps3.dts	[POWERPC] PS3: Device tree source	18 years ago
rainier.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
sbc8349.dts	[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.	17 years ago
sbc8548.dts	[POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map	17 years ago
sbc8560.dts	[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 board	17 years ago
sbc8641d.dts	[POWERPC] 86xx: Add device tree source for Wind River SBC8641D	17 years ago
sequoia.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
storcenter.dts	[POWERPC] Fix storcenter DTS typos, feedback, IRQs.	17 years ago
stx_gp3_8560.dts	[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx	17 years ago
taishan.dts	[POWERPC] 4xx: Change dts files to support jumbo frames	17 years ago
tqm5200.dts	[POWERPC] mpc5200: Amalgamated DTS fixes and updates	17 years ago
tqm8540.dts	[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx	17 years ago
tqm8541.dts	[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx	17 years ago
tqm8555.dts	[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx	17 years ago
tqm8560.dts	[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx	17 years ago
walnut.dts	[POWERPC] Start removing linux,network-index in favour of aliases	17 years ago
warp.dts	[POWERPC] Start removing linux,network-index in favour of aliases	17 years ago
yosemite.dts	[POWERPC] 4xx: Add AMCC 440EP Yosemite DTS	17 years ago