You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
315 lines
7.9 KiB
315 lines
7.9 KiB
/*
|
|
* arch/arm/mach-orion/rd88f5182-setup.c
|
|
*
|
|
* Marvell Orion-NAS Reference Design Setup
|
|
*
|
|
* Maintainer: Ronen Shitrit <rshitrit@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/arch/orion.h>
|
|
#include <asm/arch/platform.h>
|
|
#include "common.h"
|
|
|
|
/*****************************************************************************
|
|
* RD-88F5182 Info
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* 512K NOR flash Device bus boot chip select
|
|
*/
|
|
|
|
#define RD88F5182_NOR_BOOT_BASE 0xf4000000
|
|
#define RD88F5182_NOR_BOOT_SIZE SZ_512K
|
|
|
|
/*
|
|
* 16M NOR flash on Device bus chip select 1
|
|
*/
|
|
|
|
#define RD88F5182_NOR_BASE 0xfc000000
|
|
#define RD88F5182_NOR_SIZE SZ_16M
|
|
|
|
/*
|
|
* PCI
|
|
*/
|
|
|
|
#define RD88F5182_PCI_SLOT0_OFFS 7
|
|
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
|
|
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
|
|
|
|
/*
|
|
* GPIO Debug LED
|
|
*/
|
|
|
|
#define RD88F5182_GPIO_DBG_LED 0
|
|
|
|
/*****************************************************************************
|
|
* 16M NOR Flash on Device bus CS1
|
|
****************************************************************************/
|
|
|
|
static struct physmap_flash_data rd88f5182_nor_flash_data = {
|
|
.width = 1,
|
|
};
|
|
|
|
static struct resource rd88f5182_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = RD88F5182_NOR_BASE,
|
|
.end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device rd88f5182_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &rd88f5182_nor_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &rd88f5182_nor_flash_resource,
|
|
};
|
|
|
|
#ifdef CONFIG_LEDS
|
|
|
|
/*****************************************************************************
|
|
* Use GPIO debug led as CPU active indication
|
|
****************************************************************************/
|
|
|
|
static void rd88f5182_dbgled_event(led_event_t evt)
|
|
{
|
|
int val;
|
|
|
|
if (evt == led_idle_end)
|
|
val = 1;
|
|
else if (evt == led_idle_start)
|
|
val = 0;
|
|
else
|
|
return;
|
|
|
|
gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
|
|
}
|
|
|
|
static int __init rd88f5182_dbgled_init(void)
|
|
{
|
|
int pin;
|
|
|
|
if (machine_is_rd88f5182()) {
|
|
pin = RD88F5182_GPIO_DBG_LED;
|
|
|
|
if (gpio_request(pin, "DBGLED") == 0) {
|
|
if (gpio_direction_output(pin, 0) != 0) {
|
|
printk(KERN_ERR "rd88f5182_dbgled_init failed "
|
|
"to set output pin %d\n", pin);
|
|
gpio_free(pin);
|
|
return 0;
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_dbgled_init failed "
|
|
"to request gpio %d\n", pin);
|
|
return 0;
|
|
}
|
|
|
|
leds_event = rd88f5182_dbgled_event;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
__initcall(rd88f5182_dbgled_init);
|
|
|
|
#endif
|
|
|
|
/*****************************************************************************
|
|
* PCI
|
|
****************************************************************************/
|
|
|
|
void __init rd88f5182_pci_preinit(void)
|
|
{
|
|
int pin;
|
|
|
|
/*
|
|
* Configure PCI GPIO IRQ pins
|
|
*/
|
|
pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
|
|
if (gpio_request(pin, "PCI IntA") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
set_irq_type(gpio_to_irq(pin), IRQT_LOW);
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit faield to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
|
|
}
|
|
|
|
pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
|
|
if (gpio_request(pin, "PCI IntB") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
set_irq_type(gpio_to_irq(pin), IRQT_LOW);
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit faield to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
|
|
}
|
|
}
|
|
|
|
static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
/*
|
|
* PCI-E isn't used on the RD2
|
|
*/
|
|
if (dev->bus->number == orion_pcie_local_bus_nr())
|
|
return IRQ_ORION_PCIE0_INT;
|
|
|
|
/*
|
|
* PCI IRQs are connected via GPIOs
|
|
*/
|
|
switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
|
|
case 0:
|
|
if (pin == 1)
|
|
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
|
|
else
|
|
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static struct hw_pci rd88f5182_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.preinit = rd88f5182_pci_preinit,
|
|
.swizzle = pci_std_swizzle,
|
|
.setup = orion_pci_sys_setup,
|
|
.scan = orion_pci_sys_scan_bus,
|
|
.map_irq = rd88f5182_pci_map_irq,
|
|
};
|
|
|
|
static int __init rd88f5182_pci_init(void)
|
|
{
|
|
if (machine_is_rd88f5182())
|
|
pci_common_init(&rd88f5182_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(rd88f5182_pci_init);
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
|
|
static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
|
|
.phy_addr = 8,
|
|
.force_phy_addr = 1,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* RTC DS1338 on I2C bus
|
|
****************************************************************************/
|
|
static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
|
|
.driver_name = "rtc-ds1307",
|
|
.type = "ds1338",
|
|
.addr = 0x68,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Sata
|
|
****************************************************************************/
|
|
static struct mv_sata_platform_data rd88f5182_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
|
|
static struct platform_device *rd88f5182_devices[] __initdata = {
|
|
&rd88f5182_nor_flash,
|
|
};
|
|
|
|
static void __init rd88f5182_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion_init();
|
|
|
|
/*
|
|
* Setup the CPU address decode windows for our devices
|
|
*/
|
|
orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
|
|
RD88F5182_NOR_BOOT_SIZE, -1);
|
|
orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
|
|
RD88F5182_NOR_SIZE, -1);
|
|
|
|
/*
|
|
* Open a special address decode windows for the PCIE WA.
|
|
*/
|
|
orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
|
|
orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
|
|
(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
|
|
|
|
/*
|
|
* Setup Multiplexing Pins --
|
|
* MPP[0] Debug Led (GPIO - Out)
|
|
* MPP[1] Debug Led (GPIO - Out)
|
|
* MPP[2] N/A
|
|
* MPP[3] RTC_Int (GPIO - In)
|
|
* MPP[4] GPIO
|
|
* MPP[5] GPIO
|
|
* MPP[6] PCI_intA (GPIO - In)
|
|
* MPP[7] PCI_intB (GPIO - In)
|
|
* MPP[8-11] N/A
|
|
* MPP[12] SATA 0 presence Indication
|
|
* MPP[13] SATA 1 presence Indication
|
|
* MPP[14] SATA 0 active Indication
|
|
* MPP[15] SATA 1 active indication
|
|
* MPP[16-19] Not used
|
|
* MPP[20] PCI Clock to MV88F5182
|
|
* MPP[21] PCI Clock to mini PCI CON11
|
|
* MPP[22] USB 0 over current indication
|
|
* MPP[23] USB 1 over current indication
|
|
* MPP[24] USB 1 over current enable
|
|
* MPP[25] USB 0 over current enable
|
|
*/
|
|
|
|
orion_write(MPP_0_7_CTRL, 0x00000003);
|
|
orion_write(MPP_8_15_CTRL, 0x55550000);
|
|
orion_write(MPP_16_19_CTRL, 0x5555);
|
|
|
|
orion_gpio_set_valid_pins(0x000000fb);
|
|
|
|
platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
|
|
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
|
|
orion_eth_init(&rd88f5182_eth_data);
|
|
orion_sata_init(&rd88f5182_sata_data);
|
|
}
|
|
|
|
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
|
|
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
|
|
.phys_io = ORION_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = rd88f5182_init,
|
|
.map_io = orion_map_io,
|
|
.init_irq = orion_init_irq,
|
|
.timer = &orion_timer,
|
|
MACHINE_END
|
|
|