You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
kernel_samsung_sm7125/arch/powerpc/boot/dts/pcm032.dts

189 lines
3.9 KiB

/*
* phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
*
* Copyright (C) 2006-2009 Pengutronix
* Sascha Hauer <s.hauer@pengutronix.de>
* Juergen Beisert <j.beisert@pengutronix.de>
* Wolfram Sang <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
&gpt0 { fsl,has-wdt; };
&gpt2 { gpio-controller; };
&gpt3 { gpio-controller; };
&gpt4 { gpio-controller; };
&gpt5 { gpio-controller; };
&gpt6 { gpio-controller; };
&gpt7 { gpio-controller; };
/ {
model = "phytec,pcm032";
compatible = "phytec,pcm032";
memory {
reg = <0x00000000 0x08000000>; // 128MB
};
soc5200@f0000000 {
psc@2000 { /* PSC1 is ac97 */
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
cell-index = <0>;
};
/* PSC2 port is used by CAN1/2 */
psc@2200 {
status = "disabled";
};
psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
/* PSC4 is ??? */
psc@2600 {
status = "disabled";
};
/* PSC5 is ??? */
psc@2800 {
status = "disabled";
};
psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
i2c@3d40 {
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
eeprom@52 {
compatible = "catalyst,24c32", "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
};
pci@f0000d00 {
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
0xc000 0 0 3 &mpc5200_pic 1 2 3
0xc000 0 0 4 &mpc5200_pic 1 3 3
0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
0xc800 0 0 2 &mpc5200_pic 1 2 3
0xc800 0 0 3 &mpc5200_pic 1 3 3
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
localbus {
ranges = <0 0 0xfe000000 0x02000000
1 0 0xfc000000 0x02000000
2 0 0xfbe00000 0x00200000
3 0 0xf9e00000 0x02000000
4 0 0xf7e00000 0x02000000
5 0 0xe6000000 0x02000000
6 0 0xe8000000 0x02000000
7 0 0xea000000 0x02000000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x02000000>;
bank-width = <4>;
#size-cells = <1>;
#address-cells = <1>;
partition@0 {
label = "ubootl";
reg = <0x00000000 0x00040000>;
};
partition@40000 {
label = "kernel";
reg = <0x00040000 0x001c0000>;
};
partition@200000 {
label = "jffs2";
reg = <0x00200000 0x01d00000>;
};
partition@1f00000 {
label = "uboot";
reg = <0x01f00000 0x00040000>;
};
partition@1f40000 {
label = "env";
reg = <0x01f40000 0x00040000>;
};
partition@1f80000 {
label = "oftree";
reg = <0x01f80000 0x00040000>;
};
partition@1fc0000 {
label = "space";
reg = <0x01fc0000 0x00040000>;
};
};
sram@2,0 {
compatible = "mtd-ram";
reg = <2 0 0x00200000>;
bank-width = <2>;
};
/*
* example snippets for FPGA
*
* fpga@3,0 {
* compatible = "fpga_driver";
* reg = <3 0 0x02000000>;
* bank-width = <4>;
* };
*
* fpga@4,0 {
* compatible = "fpga_driver";
* reg = <4 0 0x02000000>;
* bank-width = <4>;
* };
*/
/*
* example snippets for free chipselects
*
* device@5,0 {
* compatible = "custom_driver";
* reg = <5 0 0x02000000>;
* };
*
* device@6,0 {
* compatible = "custom_driver";
* reg = <6 0 0x02000000>;
* };
*
* device@7,0 {
* compatible = "custom_driver";
* reg = <7 0 0x02000000>;
* };
*/
};
};