You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
484 lines
12 KiB
484 lines
12 KiB
/*
|
|
* linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Dec 02, 2004
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <linux/mutex.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/pxa2xx-gpio.h>
|
|
#include <asm/arch/audio.h>
|
|
|
|
#include "pxa2xx-pcm.h"
|
|
#include "pxa2xx-ac97.h"
|
|
|
|
static DEFINE_MUTEX(car_mutex);
|
|
static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
|
|
static volatile long gsr_bits;
|
|
static struct clk *ac97_clk;
|
|
#ifdef CONFIG_PXA27x
|
|
static struct clk *ac97conf_clk;
|
|
#endif
|
|
|
|
/*
|
|
* Beware PXA27x bugs:
|
|
*
|
|
* o Slot 12 read from modem space will hang controller.
|
|
* o CDONE, SDONE interrupt fails after any slot 12 IO.
|
|
*
|
|
* We therefore have an hybrid approach for waiting on SDONE (interrupt or
|
|
* 1 jiffy timeout if interrupt never comes).
|
|
*/
|
|
|
|
static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
unsigned short val = -1;
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec/modem space */
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
#else
|
|
if (reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
#endif
|
|
reg_addr += (reg >> 1);
|
|
|
|
#ifndef CONFIG_PXA27x
|
|
if (reg == AC97_GPIO_STATUS) {
|
|
/* read from controller cache */
|
|
val = *reg_addr;
|
|
goto out;
|
|
}
|
|
#endif
|
|
|
|
/* start read access across the ac97 link */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
|
|
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
|
|
if (!((GSR | gsr_bits) & GSR_SDONE)) {
|
|
printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
val = -1;
|
|
goto out;
|
|
}
|
|
|
|
/* valid data now */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
/* but we've just started another cycle... */
|
|
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
|
|
|
|
out: mutex_unlock(&car_mutex);
|
|
return val;
|
|
}
|
|
|
|
static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec/modem space */
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
#else
|
|
if (reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
#endif
|
|
reg_addr += (reg >> 1);
|
|
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
*reg_addr = val;
|
|
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
|
|
if (!((GSR | gsr_bits) & GSR_CDONE))
|
|
printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
|
|
mutex_unlock(&car_mutex);
|
|
}
|
|
|
|
static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
#ifdef CONFIG_PXA3xx
|
|
int timeout = 100;
|
|
#endif
|
|
gsr_bits = 0;
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
/* warm reset broken on Bulverde,
|
|
so manually keep AC97 reset high */
|
|
pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
|
|
udelay(10);
|
|
GCR |= GCR_WARM_RST;
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
udelay(500);
|
|
#elif defined(CONFIG_PXA3xx)
|
|
/* Can't use interrupts */
|
|
GCR |= GCR_WARM_RST;
|
|
while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(1);
|
|
#else
|
|
GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
#endif
|
|
|
|
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
|
|
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr_bits);
|
|
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
|
|
}
|
|
|
|
static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
#ifdef CONFIG_PXA3xx
|
|
int timeout = 1000;
|
|
|
|
/* Hold CLKBPB for 100us */
|
|
GCR = 0;
|
|
GCR = GCR_CLKBPB;
|
|
udelay(100);
|
|
GCR = 0;
|
|
#endif
|
|
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
#ifdef CONFIG_PXA27x
|
|
/* PXA27x Developers Manual section 13.5.2.2.1 */
|
|
clk_enable(ac97conf_clk);
|
|
udelay(5);
|
|
clk_disable(ac97conf_clk);
|
|
GCR = GCR_COLD_RST;
|
|
udelay(50);
|
|
#elif defined(CONFIG_PXA3xx)
|
|
/* Can't use interrupts on PXA3xx */
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
|
|
GCR = GCR_WARM_RST | GCR_COLD_RST;
|
|
while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(10);
|
|
#else
|
|
GCR = GCR_COLD_RST;
|
|
GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
#endif
|
|
|
|
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
|
|
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr_bits);
|
|
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
|
|
}
|
|
|
|
static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
|
|
{
|
|
long status;
|
|
|
|
status = GSR;
|
|
if (status) {
|
|
GSR = status;
|
|
gsr_bits |= status;
|
|
wake_up(&gsr_wq);
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
/* Although we don't use those we still need to clear them
|
|
since they tend to spuriously trigger when MMC is used
|
|
(hardware bug? go figure)... */
|
|
MISR = MISR_EOC;
|
|
PISR = PISR_EOC;
|
|
MCSR = MCSR_EOC;
|
|
#endif
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
struct snd_ac97_bus_ops soc_ac97_ops = {
|
|
.read = pxa2xx_ac97_read,
|
|
.write = pxa2xx_ac97_write,
|
|
.warm_reset = pxa2xx_ac97_warm_reset,
|
|
.reset = pxa2xx_ac97_cold_reset,
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
|
|
.name = "AC97 PCM Stereo out",
|
|
.dev_addr = __PREG(PCDR),
|
|
.drcmr = &DRCMRTXPCDR,
|
|
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
|
|
DCMD_BURST32 | DCMD_WIDTH4,
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
|
|
.name = "AC97 PCM Stereo in",
|
|
.dev_addr = __PREG(PCDR),
|
|
.drcmr = &DRCMRRXPCDR,
|
|
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
|
|
DCMD_BURST32 | DCMD_WIDTH4,
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
|
|
.name = "AC97 Aux PCM (Slot 5) Mono out",
|
|
.dev_addr = __PREG(MODR),
|
|
.drcmr = &DRCMRTXMODR,
|
|
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
|
|
DCMD_BURST16 | DCMD_WIDTH2,
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
|
|
.name = "AC97 Aux PCM (Slot 5) Mono in",
|
|
.dev_addr = __PREG(MODR),
|
|
.drcmr = &DRCMRRXMODR,
|
|
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
|
|
DCMD_BURST16 | DCMD_WIDTH2,
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
|
|
.name = "AC97 Mic PCM (Slot 6) Mono in",
|
|
.dev_addr = __PREG(MCDR),
|
|
.drcmr = &DRCMRRXMCDR,
|
|
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
|
|
DCMD_BURST16 | DCMD_WIDTH2,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pxa2xx_ac97_suspend(struct platform_device *pdev,
|
|
struct snd_soc_cpu_dai *dai)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
clk_disable(ac97_clk);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_ac97_resume(struct platform_device *pdev,
|
|
struct snd_soc_cpu_dai *dai)
|
|
{
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
#ifdef CONFIG_PXA27x
|
|
/* Use GPIO 113 as AC97 Reset on Bulverde */
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
#endif
|
|
clk_enable(ac97_clk);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa2xx_ac97_suspend NULL
|
|
#define pxa2xx_ac97_resume NULL
|
|
#endif
|
|
|
|
static int pxa2xx_ac97_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
#ifdef CONFIG_PXA27x
|
|
/* Use GPIO 113 as AC97 Reset on Bulverde */
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
|
|
ac97conf_clk = clk_get(&pdev->dev, "AC97CONFCLK");
|
|
if (IS_ERR(ac97conf_clk)) {
|
|
ret = PTR_ERR(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
goto err_irq;
|
|
}
|
|
#endif
|
|
ac97_clk = clk_get(&pdev->dev, "AC97CLK");
|
|
if (IS_ERR(ac97_clk)) {
|
|
ret = PTR_ERR(ac97_clk);
|
|
ac97_clk = NULL;
|
|
goto err_irq;
|
|
}
|
|
clk_enable(ac97_clk);
|
|
return 0;
|
|
|
|
err_irq:
|
|
GCR |= GCR_ACLINK_OFF;
|
|
#ifdef CONFIG_PXA27x
|
|
if (ac97conf_clk) {
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
}
|
|
#endif
|
|
free_irq(IRQ_AC97, NULL);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void pxa2xx_ac97_remove(struct platform_device *pdev)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
free_irq(IRQ_AC97, NULL);
|
|
#ifdef CONFIG_PXA27x
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
#endif
|
|
clk_disable(ac97_clk);
|
|
clk_put(ac97_clk);
|
|
ac97_clk = NULL;
|
|
}
|
|
|
|
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
|
|
else
|
|
cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
|
|
else
|
|
cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
return -ENODEV;
|
|
else
|
|
cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PXA2XX_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000)
|
|
|
|
/*
|
|
* There is only 1 physical AC97 interface for pxa2xx, but it
|
|
* has extra fifo's that can be used for aux DACs and ADCs.
|
|
*/
|
|
struct snd_soc_cpu_dai pxa_ac97_dai[] = {
|
|
{
|
|
.name = "pxa2xx-ac97",
|
|
.id = 0,
|
|
.type = SND_SOC_DAI_AC97,
|
|
.probe = pxa2xx_ac97_probe,
|
|
.remove = pxa2xx_ac97_remove,
|
|
.suspend = pxa2xx_ac97_suspend,
|
|
.resume = pxa2xx_ac97_resume,
|
|
.playback = {
|
|
.stream_name = "AC97 Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = PXA2XX_AC97_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.capture = {
|
|
.stream_name = "AC97 Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = PXA2XX_AC97_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.ops = {
|
|
.hw_params = pxa2xx_ac97_hw_params,},
|
|
},
|
|
{
|
|
.name = "pxa2xx-ac97-aux",
|
|
.id = 1,
|
|
.type = SND_SOC_DAI_AC97,
|
|
.playback = {
|
|
.stream_name = "AC97 Aux Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = PXA2XX_AC97_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.capture = {
|
|
.stream_name = "AC97 Aux Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = PXA2XX_AC97_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.ops = {
|
|
.hw_params = pxa2xx_ac97_hw_aux_params,},
|
|
},
|
|
{
|
|
.name = "pxa2xx-ac97-mic",
|
|
.id = 2,
|
|
.type = SND_SOC_DAI_AC97,
|
|
.capture = {
|
|
.stream_name = "AC97 Mic Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = PXA2XX_AC97_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.ops = {
|
|
.hw_params = pxa2xx_ac97_hw_mic_params,},
|
|
},
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(pxa_ac97_dai);
|
|
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
|
|
|
MODULE_AUTHOR("Nicolas Pitre");
|
|
MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
|
|
MODULE_LICENSE("GPL");
|
|
|