You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
406 lines
11 KiB
406 lines
11 KiB
/*
|
|
* drivers/mtd/nand/tx4938ndfmc.c
|
|
*
|
|
* Overview:
|
|
* This is a device driver for the NAND flash device connected to
|
|
* TX4938 internal NAND Memory Controller.
|
|
* TX4938 NDFMC is almost same as TX4925 NDFMC, but register size are 64 bit.
|
|
*
|
|
* Author: source@mvista.com
|
|
*
|
|
* Based on spia.c by Steven J. Hill
|
|
*
|
|
* $Id: tx4938ndfmc.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $
|
|
*
|
|
* Copyright (C) 2000-2001 Toshiba Corporation
|
|
*
|
|
* 2003 (c) MontaVista Software, Inc. This file is licensed under the
|
|
* terms of the GNU General Public License version 2. This program is
|
|
* licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/tx4938/rbtx4938.h>
|
|
|
|
extern struct nand_oobinfo jffs2_oobinfo;
|
|
|
|
/*
|
|
* MTD structure for TX4938 NDFMC
|
|
*/
|
|
static struct mtd_info *tx4938ndfmc_mtd;
|
|
|
|
/*
|
|
* Define partitions for flash device
|
|
*/
|
|
#define flush_wb() (void)tx4938_ndfmcptr->mcr;
|
|
|
|
#define NUM_PARTITIONS 3
|
|
#define NUMBER_OF_CIS_BLOCKS 24
|
|
#define SIZE_OF_BLOCK 0x00004000
|
|
#define NUMBER_OF_BLOCK_PER_ZONE 1024
|
|
#define SIZE_OF_ZONE (NUMBER_OF_BLOCK_PER_ZONE * SIZE_OF_BLOCK)
|
|
#ifndef CONFIG_MTD_CMDLINE_PARTS
|
|
/*
|
|
* You can use the following sample of MTD partitions
|
|
* on the NAND Flash Memory 32MB or more.
|
|
*
|
|
* The following figure shows the image of the sample partition on
|
|
* the 32MB NAND Flash Memory.
|
|
*
|
|
* Block No.
|
|
* 0 +-----------------------------+ ------
|
|
* | CIS | ^
|
|
* 24 +-----------------------------+ |
|
|
* | kernel image | | Zone 0
|
|
* | | |
|
|
* +-----------------------------+ |
|
|
* 1023 | unused area | v
|
|
* +-----------------------------+ ------
|
|
* 1024 | JFFS2 | ^
|
|
* | | |
|
|
* | | | Zone 1
|
|
* | | |
|
|
* | | |
|
|
* | | v
|
|
* 2047 +-----------------------------+ ------
|
|
*
|
|
*/
|
|
static struct mtd_partition partition_info[NUM_PARTITIONS] = {
|
|
{
|
|
.name = "RBTX4938 CIS Area",
|
|
.offset = 0,
|
|
.size = (NUMBER_OF_CIS_BLOCKS * SIZE_OF_BLOCK),
|
|
.mask_flags = MTD_WRITEABLE /* This partition is NOT writable */
|
|
},
|
|
{
|
|
.name = "RBTX4938 kernel image",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * 0x00100000, /* 8MB (Depends on size of kernel image) */
|
|
.mask_flags = MTD_WRITEABLE /* This partition is NOT writable */
|
|
},
|
|
{
|
|
.name = "Root FS (JFFS2)",
|
|
.offset = (0 + SIZE_OF_ZONE), /* start address of next zone */
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static void tx4938ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case NAND_CTL_SETCLE:
|
|
tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CLE;
|
|
break;
|
|
case NAND_CTL_CLRCLE:
|
|
tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CLE;
|
|
break;
|
|
case NAND_CTL_SETALE:
|
|
tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_ALE;
|
|
break;
|
|
case NAND_CTL_CLRALE:
|
|
tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_ALE;
|
|
break;
|
|
/* TX4938_NDFMCR_CE bit is 0:high 1:low */
|
|
case NAND_CTL_SETNCE:
|
|
tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CE;
|
|
break;
|
|
case NAND_CTL_CLRNCE:
|
|
tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CE;
|
|
break;
|
|
case NAND_CTL_SETWP:
|
|
tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_WE;
|
|
break;
|
|
case NAND_CTL_CLRWP:
|
|
tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_WE;
|
|
break;
|
|
}
|
|
}
|
|
static int tx4938ndfmc_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
flush_wb();
|
|
return !(tx4938_ndfmcptr->sr & TX4938_NDFSR_BUSY);
|
|
}
|
|
static void tx4938ndfmc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
|
|
{
|
|
u32 mcr = tx4938_ndfmcptr->mcr;
|
|
mcr &= ~TX4938_NDFMCR_ECC_ALL;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_READ;
|
|
ecc_code[1] = tx4938_ndfmcptr->dtr;
|
|
ecc_code[0] = tx4938_ndfmcptr->dtr;
|
|
ecc_code[2] = tx4938_ndfmcptr->dtr;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
|
|
}
|
|
static void tx4938ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
u32 mcr = tx4938_ndfmcptr->mcr;
|
|
mcr &= ~TX4938_NDFMCR_ECC_ALL;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_RESET;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
|
|
tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_ON;
|
|
}
|
|
|
|
static u_char tx4938ndfmc_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
return tx4938_read_nfmc(this->IO_ADDR_R);
|
|
}
|
|
|
|
static void tx4938ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
tx4938_write_nfmc(byte, this->IO_ADDR_W);
|
|
}
|
|
|
|
static void tx4938ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
tx4938_write_nfmc(buf[i], this->IO_ADDR_W);
|
|
}
|
|
|
|
static void tx4938ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
buf[i] = tx4938_read_nfmc(this->IO_ADDR_R);
|
|
}
|
|
|
|
static int tx4938ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i=0; i<len; i++)
|
|
if (buf[i] != tx4938_read_nfmc(this->IO_ADDR_R))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Send command to NAND device
|
|
*/
|
|
static void tx4938ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
|
|
{
|
|
register struct nand_chip *this = mtd->priv;
|
|
|
|
/* Begin command latch cycle */
|
|
this->hwcontrol(mtd, NAND_CTL_SETCLE);
|
|
/*
|
|
* Write out the command to the device.
|
|
*/
|
|
if (command == NAND_CMD_SEQIN) {
|
|
int readcmd;
|
|
|
|
if (column >= mtd->oobblock) {
|
|
/* OOB area */
|
|
column -= mtd->oobblock;
|
|
readcmd = NAND_CMD_READOOB;
|
|
} else if (column < 256) {
|
|
/* First 256 bytes --> READ0 */
|
|
readcmd = NAND_CMD_READ0;
|
|
} else {
|
|
column -= 256;
|
|
readcmd = NAND_CMD_READ1;
|
|
}
|
|
this->write_byte(mtd, readcmd);
|
|
}
|
|
this->write_byte(mtd, command);
|
|
|
|
/* Set ALE and clear CLE to start address cycle */
|
|
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
|
|
|
|
if (column != -1 || page_addr != -1) {
|
|
this->hwcontrol(mtd, NAND_CTL_SETALE);
|
|
|
|
/* Serially input address */
|
|
if (column != -1)
|
|
this->write_byte(mtd, column);
|
|
if (page_addr != -1) {
|
|
this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
|
|
this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
|
|
/* One more address cycle for higher density devices */
|
|
if (mtd->size & 0x0c000000)
|
|
this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
|
|
}
|
|
/* Latch in address */
|
|
this->hwcontrol(mtd, NAND_CTL_CLRALE);
|
|
}
|
|
|
|
/*
|
|
* program and erase have their own busy handlers
|
|
* status and sequential in needs no delay
|
|
*/
|
|
switch (command) {
|
|
|
|
case NAND_CMD_PAGEPROG:
|
|
/* Turn off WE */
|
|
this->hwcontrol (mtd, NAND_CTL_CLRWP);
|
|
return;
|
|
|
|
case NAND_CMD_SEQIN:
|
|
/* Turn on WE */
|
|
this->hwcontrol (mtd, NAND_CTL_SETWP);
|
|
return;
|
|
|
|
case NAND_CMD_ERASE1:
|
|
case NAND_CMD_ERASE2:
|
|
case NAND_CMD_STATUS:
|
|
return;
|
|
|
|
case NAND_CMD_RESET:
|
|
if (this->dev_ready)
|
|
break;
|
|
this->hwcontrol(mtd, NAND_CTL_SETCLE);
|
|
this->write_byte(mtd, NAND_CMD_STATUS);
|
|
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
|
|
while ( !(this->read_byte(mtd) & 0x40));
|
|
return;
|
|
|
|
/* This applies to read commands */
|
|
default:
|
|
/*
|
|
* If we don't have access to the busy pin, we apply the given
|
|
* command delay
|
|
*/
|
|
if (!this->dev_ready) {
|
|
udelay (this->chip_delay);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* wait until command is processed */
|
|
while (!this->dev_ready(mtd));
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, char *);
|
|
#endif
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
int __init tx4938ndfmc_init (void)
|
|
{
|
|
struct nand_chip *this;
|
|
int bsprt = 0, hold = 0xf, spw = 0xf;
|
|
int protected = 0;
|
|
|
|
if ((*rbtx4938_piosel_ptr & 0x0c) != 0x08) {
|
|
printk("TX4938 NDFMC: disabled by IOC PIOSEL\n");
|
|
return -ENODEV;
|
|
}
|
|
bsprt = 1;
|
|
hold = 2;
|
|
spw = 9 - 1; /* 8 GBUSCLK = 80ns (@ GBUSCLK 100MHz) */
|
|
|
|
if ((tx4938_ccfgptr->pcfg &
|
|
(TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL))
|
|
!= TX4938_PCFG_NDF_SEL) {
|
|
printk("TX4938 NDFMC: disabled by PCFG.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* reset NDFMC */
|
|
tx4938_ndfmcptr->rstr |= TX4938_NDFRSTR_RST;
|
|
while (tx4938_ndfmcptr->rstr & TX4938_NDFRSTR_RST)
|
|
;
|
|
/* setup BusSeparete, Hold Time, Strobe Pulse Width */
|
|
tx4938_ndfmcptr->mcr = bsprt ? TX4938_NDFMCR_BSPRT : 0;
|
|
tx4938_ndfmcptr->spr = hold << 4 | spw;
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
tx4938ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
|
|
GFP_KERNEL);
|
|
if (!tx4938ndfmc_mtd) {
|
|
printk ("Unable to allocate TX4938 NDFMC MTD device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *) (&tx4938ndfmc_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset((char *) tx4938ndfmc_mtd, 0, sizeof(struct mtd_info));
|
|
memset((char *) this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
tx4938ndfmc_mtd->priv = this;
|
|
|
|
/* Set address of NAND IO lines */
|
|
this->IO_ADDR_R = (unsigned long)&tx4938_ndfmcptr->dtr;
|
|
this->IO_ADDR_W = (unsigned long)&tx4938_ndfmcptr->dtr;
|
|
this->hwcontrol = tx4938ndfmc_hwcontrol;
|
|
this->dev_ready = tx4938ndfmc_dev_ready;
|
|
this->calculate_ecc = tx4938ndfmc_calculate_ecc;
|
|
this->correct_data = nand_correct_data;
|
|
this->enable_hwecc = tx4938ndfmc_enable_hwecc;
|
|
this->eccmode = NAND_ECC_HW3_256;
|
|
this->chip_delay = 100;
|
|
this->read_byte = tx4938ndfmc_nand_read_byte;
|
|
this->write_byte = tx4938ndfmc_nand_write_byte;
|
|
this->cmdfunc = tx4938ndfmc_nand_command;
|
|
this->write_buf = tx4938ndfmc_nand_write_buf;
|
|
this->read_buf = tx4938ndfmc_nand_read_buf;
|
|
this->verify_buf = tx4938ndfmc_nand_verify_buf;
|
|
|
|
/* Scan to find existance of the device */
|
|
if (nand_scan (tx4938ndfmc_mtd, 1)) {
|
|
kfree (tx4938ndfmc_mtd);
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (protected) {
|
|
printk(KERN_INFO "TX4938 NDFMC: write protected.\n");
|
|
tx4938ndfmc_mtd->flags &= ~(MTD_WRITEABLE | MTD_ERASEABLE);
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
{
|
|
int mtd_parts_nb = 0;
|
|
struct mtd_partition *mtd_parts = 0;
|
|
mtd_parts_nb = parse_cmdline_partitions(tx4938ndfmc_mtd, &mtd_parts, "tx4938ndfmc");
|
|
if (mtd_parts_nb > 0)
|
|
add_mtd_partitions(tx4938ndfmc_mtd, mtd_parts, mtd_parts_nb);
|
|
else
|
|
add_mtd_device(tx4938ndfmc_mtd);
|
|
}
|
|
#else
|
|
add_mtd_partitions(tx4938ndfmc_mtd, partition_info, NUM_PARTITIONS );
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
module_init(tx4938ndfmc_init);
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
static void __exit tx4938ndfmc_cleanup (void)
|
|
{
|
|
/* Release resources, unregister device */
|
|
nand_release (tx4938ndfmc_mtd);
|
|
|
|
/* Free the MTD device structure */
|
|
kfree (tx4938ndfmc_mtd);
|
|
}
|
|
module_exit(tx4938ndfmc_cleanup);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
|
|
MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on TX4938 NDFMC");
|
|
|