You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
703 lines
18 KiB
703 lines
18 KiB
/*
|
|
* ata_piix.c - Intel PATA/SATA controllers
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
*
|
|
* Copyright 2003-2005 Red Hat Inc
|
|
* Copyright 2003-2005 Jeff Garzik
|
|
*
|
|
*
|
|
* Copyright header from piix.c:
|
|
*
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available at http://developer.intel.com/
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "ata_piix"
|
|
#define DRV_VERSION "1.04"
|
|
|
|
enum {
|
|
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
|
|
ICH5_PMR = 0x90, /* port mapping register */
|
|
ICH5_PCS = 0x92, /* port control and status */
|
|
PIIX_SCC = 0x0A, /* sub-class code register */
|
|
|
|
PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */
|
|
PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */
|
|
PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */
|
|
|
|
/* combined mode. if set, PATA is channel 0.
|
|
* if clear, PATA is channel 1.
|
|
*/
|
|
PIIX_COMB_PATA_P0 = (1 << 1),
|
|
PIIX_COMB = (1 << 2), /* combined mode enabled? */
|
|
|
|
PIIX_PORT_ENABLED = (1 << 0),
|
|
PIIX_PORT_PRESENT = (1 << 4),
|
|
|
|
PIIX_80C_PRI = (1 << 5) | (1 << 4),
|
|
PIIX_80C_SEC = (1 << 7) | (1 << 6),
|
|
|
|
ich5_pata = 0,
|
|
ich5_sata = 1,
|
|
piix4_pata = 2,
|
|
ich6_sata = 3,
|
|
ich6_sata_rm = 4,
|
|
ich7_sata = 5,
|
|
esb2_sata = 6,
|
|
|
|
PIIX_AHCI_DEVICE = 6,
|
|
};
|
|
|
|
static int piix_init_one (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
|
|
static void piix_pata_phy_reset(struct ata_port *ap);
|
|
static void piix_sata_phy_reset(struct ata_port *ap);
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
|
|
|
|
static unsigned int in_module_init = 1;
|
|
|
|
static struct pci_device_id piix_pci_tbl[] = {
|
|
#ifdef ATA_ENABLE_PATA
|
|
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata },
|
|
{ 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata },
|
|
{ 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata },
|
|
#endif
|
|
|
|
/* NOTE: The following PCI ids must be kept in sync with the
|
|
* list in drivers/pci/quirks.c.
|
|
*/
|
|
|
|
{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
{ 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
{ 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
{ 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
|
|
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
|
|
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
|
|
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata },
|
|
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata },
|
|
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb2_sata },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver piix_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = piix_pci_tbl,
|
|
.probe = piix_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static Scsi_Host_Template piix_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1,
|
|
};
|
|
|
|
static const struct ata_port_operations piix_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = piix_set_piomode,
|
|
.set_dmamode = piix_set_dmamode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.phy_reset = piix_pata_phy_reset,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.eng_timeout = ata_eng_timeout,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
.port_start = ata_port_start,
|
|
.port_stop = ata_port_stop,
|
|
.host_stop = ata_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations piix_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.phy_reset = piix_sata_phy_reset,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.eng_timeout = ata_eng_timeout,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
.port_start = ata_port_start,
|
|
.port_stop = ata_port_stop,
|
|
.host_stop = ata_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info piix_port_info[] = {
|
|
/* ich5_pata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
|
|
PIIX_FLAG_CHECKINTR,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
#if 0
|
|
.mwdma_mask = 0x06, /* mwdma1-2 */
|
|
#else
|
|
.mwdma_mask = 0x00, /* mwdma broken */
|
|
#endif
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &piix_pata_ops,
|
|
},
|
|
|
|
/* ich5_sata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
|
|
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* piix4_pata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
#if 0
|
|
.mwdma_mask = 0x06, /* mwdma1-2 */
|
|
#else
|
|
.mwdma_mask = 0x00, /* mwdma broken */
|
|
#endif
|
|
.udma_mask = ATA_UDMA_MASK_40C,
|
|
.port_ops = &piix_pata_ops,
|
|
},
|
|
|
|
/* ich6_sata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
|
|
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
|
|
ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich6_sata_rm */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
|
|
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
|
|
ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich7_sata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
|
|
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
|
|
ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* esb2_sata */
|
|
{
|
|
.sht = &piix_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
|
|
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
|
|
ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
};
|
|
|
|
static struct pci_bits piix_enable_bits[] = {
|
|
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
|
|
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
|
|
};
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
/**
|
|
* piix_pata_cbl_detect - Probe host controller cable detect info
|
|
* @ap: Port for which cable detect info is desired
|
|
*
|
|
* Read 80c cable indicator from ATA PCI device's PCI config
|
|
* register. This register is normally set by firmware (BIOS).
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
static void piix_pata_cbl_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
u8 tmp, mask;
|
|
|
|
/* no 80c support in host controller? */
|
|
if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
|
|
goto cbl40;
|
|
|
|
/* check BIOS cable detect results */
|
|
mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
|
|
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
|
|
if ((tmp & mask) == 0)
|
|
goto cbl40;
|
|
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
return;
|
|
|
|
cbl40:
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
ap->udma_mask &= ATA_UDMA_MASK_40C;
|
|
}
|
|
|
|
/**
|
|
* piix_pata_phy_reset - Probe specified port on PATA host controller
|
|
* @ap: Port to probe
|
|
*
|
|
* Probe PATA phy.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_pata_phy_reset(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
|
|
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
|
|
ata_port_disable(ap);
|
|
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
|
|
return;
|
|
}
|
|
|
|
piix_pata_cbl_detect(ap);
|
|
|
|
ata_port_probe(ap);
|
|
|
|
ata_bus_reset(ap);
|
|
}
|
|
|
|
/**
|
|
* piix_sata_probe - Probe PCI device for present SATA devices
|
|
* @ap: Port associated with the PCI device we wish to probe
|
|
*
|
|
* Reads SATA PCI device's PCI config register Port Configuration
|
|
* and Status (PCS) to determine port and device availability.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*
|
|
* RETURNS:
|
|
* Non-zero if port is enabled, it may or may not have a device
|
|
* attached in that case (PRESENT bit would only be set if BIOS probe
|
|
* was done). Zero is returned if port is disabled.
|
|
*/
|
|
static int piix_sata_probe (struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
int combined = (ap->flags & ATA_FLAG_SLAVE_POSS);
|
|
int orig_mask, mask, i;
|
|
u8 pcs;
|
|
|
|
mask = (PIIX_PORT_PRESENT << ap->hard_port_no) |
|
|
(PIIX_PORT_ENABLED << ap->hard_port_no);
|
|
|
|
pci_read_config_byte(pdev, ICH5_PCS, &pcs);
|
|
orig_mask = (int) pcs & 0xff;
|
|
|
|
/* TODO: this is vaguely wrong for ICH6 combined mode,
|
|
* where only two of the four SATA ports are mapped
|
|
* onto a single ATA channel. It is also vaguely inaccurate
|
|
* for ICH5, which has only two ports. However, this is ok,
|
|
* as further device presence detection code will handle
|
|
* any false positives produced here.
|
|
*/
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
mask = (PIIX_PORT_ENABLED << i);
|
|
|
|
if ((orig_mask & mask) == mask)
|
|
if (combined || (i == ap->hard_port_no))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* piix_sata_phy_reset - Probe specified port on SATA host controller
|
|
* @ap: Port to probe
|
|
*
|
|
* Probe SATA phy.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_sata_phy_reset(struct ata_port *ap)
|
|
{
|
|
if (!piix_sata_probe(ap)) {
|
|
ata_port_disable(ap);
|
|
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
|
|
return;
|
|
}
|
|
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
ata_port_probe(ap);
|
|
|
|
ata_bus_reset(ap);
|
|
}
|
|
|
|
/**
|
|
* piix_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
|
|
unsigned int is_slave = (adev->devno != 0);
|
|
unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40;
|
|
unsigned int slave_port = 0x44;
|
|
u16 master_data;
|
|
u8 slave_data;
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
if (is_slave) {
|
|
master_data |= 0x4000;
|
|
/* enable PPE, IE and TIME */
|
|
master_data |= 0x0070;
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
slave_data &= (ap->hard_port_no ? 0x0f : 0xf0);
|
|
slave_data |=
|
|
(timings[pio][0] << 2) |
|
|
(timings[pio][1] << (ap->hard_port_no ? 4 : 0));
|
|
} else {
|
|
master_data &= 0xccf8;
|
|
/* enable PPE, IE and TIME */
|
|
master_data |= 0x0007;
|
|
master_data |=
|
|
(timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
}
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
if (is_slave)
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
}
|
|
|
|
/**
|
|
* piix_set_dmamode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
* @udma: udma mode, 0 - 6
|
|
*
|
|
* Set UDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */
|
|
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
|
|
u8 maslave = ap->hard_port_no ? 0x42 : 0x40;
|
|
u8 speed = udma;
|
|
unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno;
|
|
int a_speed = 3 << (drive_dn * 4);
|
|
int u_flag = 1 << drive_dn;
|
|
int v_flag = 0x01 << drive_dn;
|
|
int w_flag = 0x10 << drive_dn;
|
|
int u_speed = 0;
|
|
int sitre;
|
|
u16 reg4042, reg4a;
|
|
u8 reg48, reg54, reg55;
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
DPRINTK("reg4042 = 0x%04x\n", reg4042);
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
pci_read_config_byte(dev, 0x48, ®48);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
pci_read_config_byte(dev, 0x54, ®54);
|
|
pci_read_config_byte(dev, 0x55, ®55);
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break;
|
|
case XFER_UDMA_6:
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break;
|
|
case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break;
|
|
case XFER_MW_DMA_2:
|
|
case XFER_MW_DMA_1: break;
|
|
default:
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
if (!(reg48 & u_flag))
|
|
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
|
|
if (speed == XFER_UDMA_5) {
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
|
|
} else {
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
}
|
|
if ((reg4a & a_speed) != u_speed)
|
|
pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
|
|
if (speed > XFER_UDMA_2) {
|
|
if (!(reg54 & v_flag))
|
|
pci_write_config_byte(dev, 0x54, reg54 | v_flag);
|
|
} else
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
} else {
|
|
if (reg48 & u_flag)
|
|
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
|
|
if (reg4a & a_speed)
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
if (reg54 & v_flag)
|
|
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
|
if (reg55 & w_flag)
|
|
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
|
}
|
|
}
|
|
|
|
#define AHCI_PCI_BAR 5
|
|
#define AHCI_GLOBAL_CTL 0x04
|
|
#define AHCI_ENABLE (1 << 31)
|
|
static int piix_disable_ahci(struct pci_dev *pdev)
|
|
{
|
|
void __iomem *mmio;
|
|
u32 tmp;
|
|
int rc = 0;
|
|
|
|
/* BUG: pci_enable_device has not yet been called. This
|
|
* works because this device is usually set up by BIOS.
|
|
*/
|
|
|
|
if (!pci_resource_start(pdev, AHCI_PCI_BAR) ||
|
|
!pci_resource_len(pdev, AHCI_PCI_BAR))
|
|
return 0;
|
|
|
|
mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64);
|
|
if (!mmio)
|
|
return -ENOMEM;
|
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
if (tmp & AHCI_ENABLE) {
|
|
tmp &= ~AHCI_ENABLE;
|
|
writel(tmp, mmio + AHCI_GLOBAL_CTL);
|
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
if (tmp & AHCI_ENABLE)
|
|
rc = -EIO;
|
|
}
|
|
|
|
pci_iounmap(pdev, mmio);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* piix_init_one - Register PIIX ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in piix_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
* and then hand over control to libata, for it to do the rest.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_port_info *port_info[2];
|
|
unsigned int combined = 0, n_ports = 1;
|
|
unsigned int pata_chan = 0, sata_chan = 0;
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
/* no hotplugging support (FIXME) */
|
|
if (!in_module_init)
|
|
return -ENODEV;
|
|
|
|
port_info[0] = &piix_port_info[ent->driver_data];
|
|
port_info[1] = NULL;
|
|
|
|
if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
|
|
u8 tmp;
|
|
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
|
|
if (tmp == PIIX_AHCI_DEVICE) {
|
|
int rc = piix_disable_ahci(pdev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
|
|
u8 tmp;
|
|
pci_read_config_byte(pdev, ICH5_PMR, &tmp);
|
|
|
|
if (tmp & PIIX_COMB) {
|
|
combined = 1;
|
|
if (tmp & PIIX_COMB_PATA_P0)
|
|
sata_chan = 1;
|
|
else
|
|
pata_chan = 1;
|
|
}
|
|
}
|
|
|
|
/* On ICH5, some BIOSen disable the interrupt using the
|
|
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
|
|
* On ICH6, this bit has the same effect, but only when
|
|
* MSI is disabled (and it is disabled, as we don't use
|
|
* message-signalled interrupts currently).
|
|
*/
|
|
if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
|
|
pci_intx(pdev, 1);
|
|
|
|
if (combined) {
|
|
port_info[sata_chan] = &piix_port_info[ent->driver_data];
|
|
port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
|
|
port_info[pata_chan] = &piix_port_info[ich5_pata];
|
|
n_ports++;
|
|
|
|
printk(KERN_WARNING DRV_NAME ": combined mode detected\n");
|
|
}
|
|
|
|
return ata_pci_init_one(pdev, port_info, n_ports);
|
|
}
|
|
|
|
static int __init piix_init(void)
|
|
{
|
|
int rc;
|
|
|
|
DPRINTK("pci_module_init\n");
|
|
rc = pci_module_init(&piix_pci_driver);
|
|
if (rc)
|
|
return rc;
|
|
|
|
in_module_init = 0;
|
|
|
|
DPRINTK("done\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit piix_exit(void)
|
|
{
|
|
pci_unregister_driver(&piix_pci_driver);
|
|
}
|
|
|
|
module_init(piix_init);
|
|
module_exit(piix_exit);
|
|
|
|
|