You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1014 lines
26 KiB
1014 lines
26 KiB
/*
|
|
* budget-av.c: driver for the SAA7146 based Budget DVB cards
|
|
* with analog video in
|
|
*
|
|
* Compiled from various sources by Michael Hunold <michael@mihu.de>
|
|
*
|
|
* CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
|
|
* Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
*
|
|
* Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
|
|
*
|
|
* Copyright (C) 1999-2002 Ralph Metzler
|
|
* & Marcus Metzler for convergence integrated media GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
|
|
*
|
|
*
|
|
* the project's page is at http://www.linuxtv.org/dvb/
|
|
*/
|
|
|
|
#include "budget.h"
|
|
#include "stv0299.h"
|
|
#include "tda10021.h"
|
|
#include "tda1004x.h"
|
|
#include <media/saa7146_vv.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "dvb_ca_en50221.h"
|
|
|
|
#define DEBICICAM 0x02420000
|
|
|
|
struct budget_av {
|
|
struct budget budget;
|
|
struct video_device *vd;
|
|
int cur_input;
|
|
int has_saa7113;
|
|
struct tasklet_struct ciintf_irq_tasklet;
|
|
int slot_status;
|
|
struct dvb_ca_en50221 ca;
|
|
};
|
|
|
|
static int enable_ci = 0;
|
|
|
|
|
|
/****************************************************************************
|
|
* INITIALIZATION
|
|
****************************************************************************/
|
|
|
|
static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
|
|
{
|
|
u8 mm1[] = { 0x00 };
|
|
u8 mm2[] = { 0x00 };
|
|
struct i2c_msg msgs[2];
|
|
|
|
msgs[0].flags = 0;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[0].addr = msgs[1].addr = id / 2;
|
|
mm1[0] = reg;
|
|
msgs[0].len = 1;
|
|
msgs[1].len = 1;
|
|
msgs[0].buf = mm1;
|
|
msgs[1].buf = mm2;
|
|
|
|
i2c_transfer(i2c, msgs, 2);
|
|
|
|
return mm2[0];
|
|
}
|
|
|
|
static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
|
|
{
|
|
u8 mm1[] = { reg };
|
|
struct i2c_msg msgs[2] = {
|
|
{.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
|
|
{.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
|
|
};
|
|
|
|
if (i2c_transfer(i2c, msgs, 2) != 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
|
|
{
|
|
u8 msg[2] = { reg, val };
|
|
struct i2c_msg msgs;
|
|
|
|
msgs.flags = 0;
|
|
msgs.addr = id / 2;
|
|
msgs.len = 2;
|
|
msgs.buf = msg;
|
|
return i2c_transfer(i2c, &msgs, 1);
|
|
}
|
|
|
|
static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
int result;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
|
|
udelay(1);
|
|
|
|
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
|
|
|
|
if (result == -ETIMEDOUT)
|
|
budget_av->slot_status = 0;
|
|
return result;
|
|
}
|
|
|
|
static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
int result;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
|
|
udelay(1);
|
|
|
|
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
|
|
|
|
if (result == -ETIMEDOUT)
|
|
budget_av->slot_status = 0;
|
|
return result;
|
|
}
|
|
|
|
static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
int result;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
|
|
udelay(1);
|
|
|
|
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
|
|
|
|
if (result == -ETIMEDOUT)
|
|
budget_av->slot_status = 0;
|
|
return result;
|
|
}
|
|
|
|
static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
int result;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
|
|
udelay(1);
|
|
|
|
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
|
|
|
|
if (result == -ETIMEDOUT)
|
|
budget_av->slot_status = 0;
|
|
return result;
|
|
}
|
|
|
|
static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
int max = 20;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
dprintk(1, "ciintf_slot_reset\n");
|
|
|
|
/* reset the card */
|
|
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
|
|
msleep(100);
|
|
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
|
|
|
|
while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
|
|
msleep(100);
|
|
|
|
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
|
|
return 0;
|
|
}
|
|
|
|
static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
dprintk(1, "ciintf_slot_shutdown\n");
|
|
|
|
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
|
|
budget_av->slot_status = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
|
|
|
|
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
|
|
return 0;
|
|
}
|
|
|
|
static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) ca->data;
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
int cam = 0;
|
|
|
|
if (slot != 0)
|
|
return -EINVAL;
|
|
|
|
if (!budget_av->slot_status) {
|
|
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
|
|
udelay(1);
|
|
cam = saa7146_read(saa, PSR) & MASK_06;
|
|
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
|
|
|
|
if (cam)
|
|
budget_av->slot_status = 1;
|
|
} else if (!open) {
|
|
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
|
|
if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
|
|
budget_av->slot_status = 0;
|
|
}
|
|
|
|
if (budget_av->slot_status == 1)
|
|
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ciintf_init(struct budget_av *budget_av)
|
|
{
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
int result;
|
|
|
|
memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
|
|
|
|
/* setup GPIOs */
|
|
saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
|
|
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
|
|
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
|
|
|
|
/* Reset the card */
|
|
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
|
|
msleep(50);
|
|
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
|
|
msleep(100);
|
|
|
|
/* Enable DEBI pins */
|
|
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
|
|
|
|
/* register CI interface */
|
|
budget_av->ca.owner = THIS_MODULE;
|
|
budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
|
|
budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
|
|
budget_av->ca.read_cam_control = ciintf_read_cam_control;
|
|
budget_av->ca.write_cam_control = ciintf_write_cam_control;
|
|
budget_av->ca.slot_reset = ciintf_slot_reset;
|
|
budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
|
|
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
|
|
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
|
|
budget_av->ca.data = budget_av;
|
|
if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
|
|
&budget_av->ca, 0, 1)) != 0) {
|
|
printk("budget_av: CI interface detected, but initialisation failed.\n");
|
|
goto error;
|
|
}
|
|
// success!
|
|
printk("ciintf_init: CI interface initialised\n");
|
|
budget_av->budget.ci_present = 1;
|
|
return 0;
|
|
|
|
error:
|
|
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
|
|
return result;
|
|
}
|
|
|
|
static void ciintf_deinit(struct budget_av *budget_av)
|
|
{
|
|
struct saa7146_dev *saa = budget_av->budget.dev;
|
|
|
|
saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
|
|
saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
|
|
saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
|
|
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
|
|
|
|
/* release the CA device */
|
|
dvb_ca_en50221_release(&budget_av->ca);
|
|
|
|
/* disable DEBI pins */
|
|
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
|
|
}
|
|
|
|
|
|
static const u8 saa7113_tab[] = {
|
|
0x01, 0x08,
|
|
0x02, 0xc0,
|
|
0x03, 0x33,
|
|
0x04, 0x00,
|
|
0x05, 0x00,
|
|
0x06, 0xeb,
|
|
0x07, 0xe0,
|
|
0x08, 0x28,
|
|
0x09, 0x00,
|
|
0x0a, 0x80,
|
|
0x0b, 0x47,
|
|
0x0c, 0x40,
|
|
0x0d, 0x00,
|
|
0x0e, 0x01,
|
|
0x0f, 0x44,
|
|
|
|
0x10, 0x08,
|
|
0x11, 0x0c,
|
|
0x12, 0x7b,
|
|
0x13, 0x00,
|
|
0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
|
|
|
|
0x57, 0xff,
|
|
0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
|
|
0x5b, 0x83, 0x5e, 0x00,
|
|
0xff
|
|
};
|
|
|
|
static int saa7113_init(struct budget_av *budget_av)
|
|
{
|
|
struct budget *budget = &budget_av->budget;
|
|
const u8 *data = saa7113_tab;
|
|
|
|
if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
|
|
dprintk(1, "saa7113 not found on KNC card\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dprintk(1, "saa7113 detected and initializing\n");
|
|
|
|
while (*data != 0xff) {
|
|
i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
|
|
data += 2;
|
|
}
|
|
|
|
dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7113_setinput(struct budget_av *budget_av, int input)
|
|
{
|
|
struct budget *budget = &budget_av->budget;
|
|
|
|
if (1 != budget_av->has_saa7113)
|
|
return -ENODEV;
|
|
|
|
if (input == 1) {
|
|
i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
|
|
i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
|
|
} else if (input == 0) {
|
|
i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
|
|
i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
|
|
} else
|
|
return -EINVAL;
|
|
|
|
budget_av->cur_input = input;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
|
|
{
|
|
u8 aclk = 0;
|
|
u8 bclk = 0;
|
|
u8 m1;
|
|
|
|
aclk = 0xb5;
|
|
if (srate < 2000000)
|
|
bclk = 0x86;
|
|
else if (srate < 5000000)
|
|
bclk = 0x89;
|
|
else if (srate < 15000000)
|
|
bclk = 0x8f;
|
|
else if (srate < 45000000)
|
|
bclk = 0x95;
|
|
|
|
m1 = 0x14;
|
|
if (srate < 4000000)
|
|
m1 = 0x10;
|
|
|
|
stv0299_writereg(fe, 0x13, aclk);
|
|
stv0299_writereg(fe, 0x14, bclk);
|
|
stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
|
|
stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
|
|
stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
|
|
stv0299_writereg(fe, 0x0f, 0x80 | m1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
|
|
u32 div;
|
|
u8 buf[4];
|
|
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
|
|
|
|
if ((params->frequency < 950000) || (params->frequency > 2150000))
|
|
return -EINVAL;
|
|
|
|
div = (params->frequency + (125 - 1)) / 125; // round correctly
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
|
|
buf[3] = 0x20;
|
|
|
|
if (params->u.qpsk.symbol_rate < 4000000)
|
|
buf[3] |= 1;
|
|
|
|
if (params->frequency < 1250000)
|
|
buf[3] |= 0;
|
|
else if (params->frequency < 1550000)
|
|
buf[3] |= 0x40;
|
|
else if (params->frequency < 2050000)
|
|
buf[3] |= 0x80;
|
|
else if (params->frequency < 2150000)
|
|
buf[3] |= 0xC0;
|
|
|
|
if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static u8 typhoon_cinergy1200s_inittab[] = {
|
|
0x01, 0x15,
|
|
0x02, 0x30,
|
|
0x03, 0x00,
|
|
0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
|
|
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
|
|
0x06, 0x40, /* DAC not used, set to high impendance mode */
|
|
0x07, 0x00, /* DAC LSB */
|
|
0x08, 0x40, /* DiSEqC off */
|
|
0x09, 0x00, /* FIFO */
|
|
0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
|
|
0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
|
|
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
|
|
0x10, 0x3f, // AGC2 0x3d
|
|
0x11, 0x84,
|
|
0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
|
|
0x15, 0xc9, // lock detector threshold
|
|
0x16, 0x00,
|
|
0x17, 0x00,
|
|
0x18, 0x00,
|
|
0x19, 0x00,
|
|
0x1a, 0x00,
|
|
0x1f, 0x50,
|
|
0x20, 0x00,
|
|
0x21, 0x00,
|
|
0x22, 0x00,
|
|
0x23, 0x00,
|
|
0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
|
|
0x29, 0x1e, // 1/2 threshold
|
|
0x2a, 0x14, // 2/3 threshold
|
|
0x2b, 0x0f, // 3/4 threshold
|
|
0x2c, 0x09, // 5/6 threshold
|
|
0x2d, 0x05, // 7/8 threshold
|
|
0x2e, 0x01,
|
|
0x31, 0x1f, // test all FECs
|
|
0x32, 0x19, // viterbi and synchro search
|
|
0x33, 0xfc, // rs control
|
|
0x34, 0x93, // error control
|
|
0x0f, 0x92,
|
|
0xff, 0xff
|
|
};
|
|
|
|
static struct stv0299_config typhoon_config = {
|
|
.demod_address = 0x68,
|
|
.inittab = typhoon_cinergy1200s_inittab,
|
|
.mclk = 88000000UL,
|
|
.invert = 0,
|
|
.enhanced_tuning = 0,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0229_LOCKOUTPUT_1,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP0,
|
|
.min_delay_ms = 100,
|
|
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
|
|
.pll_set = philips_su1278_ty_ci_pll_set,
|
|
};
|
|
|
|
|
|
static struct stv0299_config cinergy_1200s_config = {
|
|
.demod_address = 0x68,
|
|
.inittab = typhoon_cinergy1200s_inittab,
|
|
.mclk = 88000000UL,
|
|
.invert = 0,
|
|
.enhanced_tuning = 0,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0229_LOCKOUTPUT_0,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP0,
|
|
.min_delay_ms = 100,
|
|
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
|
|
.pll_set = philips_su1278_ty_ci_pll_set,
|
|
};
|
|
|
|
|
|
static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct budget *budget = (struct budget *) fe->dvb->priv;
|
|
u8 buf[4];
|
|
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
|
|
|
|
#define TUNER_MUL 62500
|
|
|
|
u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = 0x8e;
|
|
buf[3] = (params->frequency < 174500000 ? 0xa1 :
|
|
params->frequency < 454000000 ? 0x92 : 0x34);
|
|
|
|
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static struct tda10021_config philips_cu1216_config = {
|
|
.demod_address = 0x0c,
|
|
.pll_set = philips_cu1216_pll_set,
|
|
};
|
|
|
|
|
|
|
|
|
|
static int philips_tu1216_pll_init(struct dvb_frontend *fe)
|
|
{
|
|
struct budget *budget = (struct budget *) fe->dvb->priv;
|
|
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
|
|
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
|
|
|
|
// setup PLL configuration
|
|
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct budget *budget = (struct budget *) fe->dvb->priv;
|
|
u8 tuner_buf[4];
|
|
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
|
|
sizeof(tuner_buf) };
|
|
int tuner_frequency = 0;
|
|
u8 band, cp, filter;
|
|
|
|
// determine charge pump
|
|
tuner_frequency = params->frequency + 36166000;
|
|
if (tuner_frequency < 87000000)
|
|
return -EINVAL;
|
|
else if (tuner_frequency < 130000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 160000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 200000000)
|
|
cp = 6;
|
|
else if (tuner_frequency < 290000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 420000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 480000000)
|
|
cp = 6;
|
|
else if (tuner_frequency < 620000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 830000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 895000000)
|
|
cp = 7;
|
|
else
|
|
return -EINVAL;
|
|
|
|
// determine band
|
|
if (params->frequency < 49000000)
|
|
return -EINVAL;
|
|
else if (params->frequency < 161000000)
|
|
band = 1;
|
|
else if (params->frequency < 444000000)
|
|
band = 2;
|
|
else if (params->frequency < 861000000)
|
|
band = 4;
|
|
else
|
|
return -EINVAL;
|
|
|
|
// setup PLL filter
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
filter = 0;
|
|
break;
|
|
|
|
case BANDWIDTH_7_MHZ:
|
|
filter = 0;
|
|
break;
|
|
|
|
case BANDWIDTH_8_MHZ:
|
|
filter = 1;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
// calculate divisor
|
|
// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
|
|
tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
|
|
|
|
// setup tuner buffer
|
|
tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
|
|
tuner_buf[1] = tuner_frequency & 0xff;
|
|
tuner_buf[2] = 0xca;
|
|
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
|
|
|
|
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
|
|
msleep(1);
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
|
|
const struct firmware **fw, char *name)
|
|
{
|
|
struct budget *budget = (struct budget *) fe->dvb->priv;
|
|
|
|
return request_firmware(fw, name, &budget->dev->pci->dev);
|
|
}
|
|
|
|
static struct tda1004x_config philips_tu1216_config = {
|
|
|
|
.demod_address = 0x8,
|
|
.invert = 1,
|
|
.invert_oclk = 1,
|
|
.pll_init = philips_tu1216_pll_init,
|
|
.pll_set = philips_tu1216_pll_set,
|
|
.request_firmware = philips_tu1216_request_firmware,
|
|
};
|
|
|
|
|
|
|
|
|
|
static u8 read_pwm(struct budget_av *budget_av)
|
|
{
|
|
u8 b = 0xff;
|
|
u8 pwm;
|
|
struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
|
|
{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
|
|
};
|
|
|
|
if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
|
|
|| (pwm == 0xff))
|
|
pwm = 0x48;
|
|
|
|
return pwm;
|
|
}
|
|
|
|
|
|
static void frontend_init(struct budget_av *budget_av)
|
|
{
|
|
switch (budget_av->budget.dev->pci->subsystem_device) {
|
|
case 0x4f56: // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
|
|
budget_av->budget.dvb_frontend =
|
|
stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
|
|
if (budget_av->budget.dvb_frontend != NULL) {
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x0020: // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
|
|
budget_av->budget.dvb_frontend =
|
|
tda10021_attach(&philips_cu1216_config,
|
|
&budget_av->budget.i2c_adap, read_pwm(budget_av));
|
|
if (budget_av->budget.dvb_frontend != NULL) {
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x0030: // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
|
|
budget_av->budget.dvb_frontend =
|
|
tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
|
|
if (budget_av->budget.dvb_frontend != NULL) {
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x1154: // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
|
|
budget_av->budget.dvb_frontend =
|
|
stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
|
|
if (budget_av->budget.dvb_frontend != NULL) {
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x1156: // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
|
|
budget_av->budget.dvb_frontend =
|
|
tda10021_attach(&philips_cu1216_config,
|
|
&budget_av->budget.i2c_adap, read_pwm(budget_av));
|
|
if (budget_av->budget.dvb_frontend) {
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x1157: // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
|
|
budget_av->budget.dvb_frontend =
|
|
tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
|
|
if (budget_av->budget.dvb_frontend) {
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (budget_av->budget.dvb_frontend == NULL) {
|
|
printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
|
|
budget_av->budget.dev->pci->vendor,
|
|
budget_av->budget.dev->pci->device,
|
|
budget_av->budget.dev->pci->subsystem_vendor,
|
|
budget_av->budget.dev->pci->subsystem_device);
|
|
} else {
|
|
if (dvb_register_frontend
|
|
(budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
|
|
printk("budget-av: Frontend registration failed!\n");
|
|
if (budget_av->budget.dvb_frontend->ops->release)
|
|
budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
|
|
budget_av->budget.dvb_frontend = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
|
|
|
|
dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
|
|
|
|
if (*isr & MASK_10)
|
|
ttpci_budget_irq10_handler(dev, isr);
|
|
}
|
|
|
|
static int budget_av_detach(struct saa7146_dev *dev)
|
|
{
|
|
struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
|
|
int err;
|
|
|
|
dprintk(2, "dev: %p\n", dev);
|
|
|
|
if (1 == budget_av->has_saa7113) {
|
|
saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
|
|
|
|
msleep(200);
|
|
|
|
saa7146_unregister_device(&budget_av->vd, dev);
|
|
}
|
|
|
|
if (budget_av->budget.ci_present)
|
|
ciintf_deinit(budget_av);
|
|
|
|
if (budget_av->budget.dvb_frontend != NULL)
|
|
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
|
|
err = ttpci_budget_deinit(&budget_av->budget);
|
|
|
|
kfree(budget_av);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct saa7146_ext_vv vv_data;
|
|
|
|
static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
|
|
{
|
|
struct budget_av *budget_av;
|
|
u8 *mac;
|
|
int err;
|
|
|
|
dprintk(2, "dev: %p\n", dev);
|
|
|
|
if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
|
|
return -ENOMEM;
|
|
|
|
memset(budget_av, 0, sizeof(struct budget_av));
|
|
|
|
budget_av->budget.ci_present = 0;
|
|
|
|
dev->ext_priv = budget_av;
|
|
|
|
if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
|
|
kfree(budget_av);
|
|
return err;
|
|
}
|
|
|
|
/* knc1 initialization */
|
|
saa7146_write(dev, DD1_STREAM_B, 0x04000000);
|
|
saa7146_write(dev, DD1_INIT, 0x07000600);
|
|
saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
|
|
|
|
saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
|
|
msleep(500);
|
|
|
|
if (0 == saa7113_init(budget_av)) {
|
|
budget_av->has_saa7113 = 1;
|
|
|
|
if (0 != saa7146_vv_init(dev, &vv_data)) {
|
|
/* fixme: proper cleanup here */
|
|
ERR(("cannot init vv subsystem.\n"));
|
|
return err;
|
|
}
|
|
|
|
if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
|
|
/* fixme: proper cleanup here */
|
|
ERR(("cannot register capture v4l2 device.\n"));
|
|
return err;
|
|
}
|
|
|
|
/* beware: this modifies dev->vv ... */
|
|
saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
|
|
SAA7146_HPS_SYNC_PORT_A);
|
|
|
|
saa7113_setinput(budget_av, 0);
|
|
} else {
|
|
budget_av->has_saa7113 = 0;
|
|
|
|
saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
|
|
}
|
|
|
|
/* fixme: find some sane values here... */
|
|
saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
|
|
|
|
mac = budget_av->budget.dvb_adapter->proposed_mac;
|
|
if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
|
|
printk("KNC1-%d: Could not read MAC from KNC1 card\n",
|
|
budget_av->budget.dvb_adapter->num);
|
|
memset(mac, 0, 6);
|
|
} else {
|
|
printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
|
|
budget_av->budget.dvb_adapter->num,
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
}
|
|
|
|
budget_av->budget.dvb_adapter->priv = budget_av;
|
|
frontend_init(budget_av);
|
|
|
|
if (enable_ci)
|
|
ciintf_init(budget_av);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define KNC1_INPUTS 2
|
|
static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
|
|
{0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
|
|
{1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
|
|
};
|
|
|
|
static struct saa7146_extension_ioctls ioctls[] = {
|
|
{VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
|
|
{VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
|
|
{VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
|
|
{0, 0}
|
|
};
|
|
|
|
static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
|
|
{
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
|
|
|
|
switch (cmd) {
|
|
case VIDIOC_ENUMINPUT:{
|
|
struct v4l2_input *i = arg;
|
|
|
|
dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
|
|
if (i->index < 0 || i->index >= KNC1_INPUTS) {
|
|
return -EINVAL;
|
|
}
|
|
memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
|
|
return 0;
|
|
}
|
|
case VIDIOC_G_INPUT:{
|
|
int *input = (int *) arg;
|
|
|
|
*input = budget_av->cur_input;
|
|
|
|
dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
|
|
return 0;
|
|
}
|
|
case VIDIOC_S_INPUT:{
|
|
int input = *(int *) arg;
|
|
dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
|
|
return saa7113_setinput(budget_av, input);
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct saa7146_standard standard[] = {
|
|
{.name = "PAL",.id = V4L2_STD_PAL,
|
|
.v_offset = 0x17,.v_field = 288,
|
|
.h_offset = 0x14,.h_pixels = 680,
|
|
.v_max_out = 576,.h_max_out = 768 },
|
|
|
|
{.name = "NTSC",.id = V4L2_STD_NTSC,
|
|
.v_offset = 0x16,.v_field = 240,
|
|
.h_offset = 0x06,.h_pixels = 708,
|
|
.v_max_out = 480,.h_max_out = 640, },
|
|
};
|
|
|
|
static struct saa7146_ext_vv vv_data = {
|
|
.inputs = 2,
|
|
.capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
|
|
.flags = 0,
|
|
.stds = &standard[0],
|
|
.num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
|
|
.ioctls = &ioctls[0],
|
|
.ioctl = av_ioctl,
|
|
};
|
|
|
|
static struct saa7146_extension budget_extension;
|
|
|
|
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
|
|
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
|
|
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
|
|
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
|
|
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
|
|
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
|
|
|
|
static struct pci_device_id pci_tbl[] = {
|
|
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
|
|
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
|
|
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
|
|
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
|
|
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
|
|
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
|
|
{
|
|
.vendor = 0,
|
|
}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pci_tbl);
|
|
|
|
static struct saa7146_extension budget_extension = {
|
|
.name = "budget dvb /w video in\0",
|
|
.pci_tbl = pci_tbl,
|
|
|
|
.module = THIS_MODULE,
|
|
.attach = budget_av_attach,
|
|
.detach = budget_av_detach,
|
|
|
|
.irq_mask = MASK_10,
|
|
.irq_func = budget_av_irq,
|
|
};
|
|
|
|
static int __init budget_av_init(void)
|
|
{
|
|
return saa7146_register_extension(&budget_extension);
|
|
}
|
|
|
|
static void __exit budget_av_exit(void)
|
|
{
|
|
saa7146_unregister_extension(&budget_extension);
|
|
}
|
|
|
|
module_init(budget_av_init);
|
|
module_exit(budget_av_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
|
|
MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
|
|
"budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
|
|
module_param_named(enable_ci, enable_ci, int, 0644);
|
|
MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");
|
|
|