You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
84 lines
2.6 KiB
84 lines
2.6 KiB
* Allwinner sun8i GMAC ethernet controller
|
|
|
|
This device is a platform glue layer for stmmac.
|
|
Please see stmmac.txt for the other unchanged properties.
|
|
|
|
Required properties:
|
|
- compatible: should be one of the following string:
|
|
"allwinner,sun8i-a83t-emac"
|
|
"allwinner,sun8i-h3-emac"
|
|
"allwinner,sun8i-v3s-emac"
|
|
"allwinner,sun50i-a64-emac"
|
|
- reg: address and length of the register for the device.
|
|
- interrupts: interrupt for the device
|
|
- interrupt-names: should be "macirq"
|
|
- clocks: A phandle to the reference clock for this device
|
|
- clock-names: should be "stmmaceth"
|
|
- resets: A phandle to the reset control for this device
|
|
- reset-names: should be "stmmaceth"
|
|
- phy-mode: See ethernet.txt
|
|
- phy-handle: See ethernet.txt
|
|
- #address-cells: shall be 1
|
|
- #size-cells: shall be 0
|
|
- syscon: A phandle to the syscon of the SoC with one of the following
|
|
compatible string:
|
|
- allwinner,sun8i-h3-system-controller
|
|
- allwinner,sun8i-v3s-system-controller
|
|
- allwinner,sun50i-a64-system-controller
|
|
- allwinner,sun8i-a83t-system-controller
|
|
|
|
Optional properties:
|
|
- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
|
|
- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
|
|
Both delay properties need to be a multiple of 100. They control the delay for
|
|
external PHY.
|
|
|
|
Optional properties for the following compatibles:
|
|
- "allwinner,sun8i-h3-emac",
|
|
- "allwinner,sun8i-v3s-emac":
|
|
- allwinner,leds-active-low: EPHY LEDs are active low
|
|
|
|
Required child node of emac:
|
|
- mdio bus node: should be named mdio
|
|
|
|
Required properties of the mdio node:
|
|
- #address-cells: shall be 1
|
|
- #size-cells: shall be 0
|
|
|
|
The device node referenced by "phy" or "phy-handle" should be a child node
|
|
of the mdio node. See phy.txt for the generic PHY bindings.
|
|
|
|
Required properties of the phy node with the following compatibles:
|
|
- "allwinner,sun8i-h3-emac",
|
|
- "allwinner,sun8i-v3s-emac":
|
|
- clocks: a phandle to the reference clock for the EPHY
|
|
- resets: a phandle to the reset control for the EPHY
|
|
|
|
Example:
|
|
|
|
emac: ethernet@1c0b000 {
|
|
compatible = "allwinner,sun8i-h3-emac";
|
|
syscon = <&syscon>;
|
|
reg = <0x01c0b000 0x104>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
resets = <&ccu RST_BUS_EMAC>;
|
|
reset-names = "stmmaceth";
|
|
clocks = <&ccu CLK_BUS_EMAC>;
|
|
clock-names = "stmmaceth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy-handle = <&int_mii_phy>;
|
|
phy-mode = "mii";
|
|
allwinner,leds-active-low;
|
|
mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
int_mii_phy: ethernet-phy@1 {
|
|
reg = <1>;
|
|
clocks = <&ccu CLK_BUS_EPHY>;
|
|
resets = <&ccu RST_BUS_EPHY>;
|
|
};
|
|
};
|
|
};
|
|
|