You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
414 lines
9.3 KiB
414 lines
9.3 KiB
Distributed Switch Architecture Device Tree Bindings
|
|
----------------------------------------------------
|
|
|
|
Two bindings exist, one of which has been deprecated due to
|
|
limitations.
|
|
|
|
Current Binding
|
|
---------------
|
|
|
|
Switches are true Linux devices and can be probes by any means. Once
|
|
probed, they register to the DSA framework, passing a node
|
|
pointer. This node is expected to fulfil the following binding, and
|
|
may contain additional properties as required by the device it is
|
|
embedded within.
|
|
|
|
Required properties:
|
|
|
|
- ports : A container for child nodes representing switch ports.
|
|
|
|
Optional properties:
|
|
|
|
- dsa,member : A two element list indicates which DSA cluster, and position
|
|
within the cluster a switch takes. <0 0> is cluster 0,
|
|
switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1,
|
|
switch 0. A switch not part of any cluster (single device
|
|
hanging off a CPU port) must not specify this property
|
|
|
|
The ports container has the following properties
|
|
|
|
Required properties:
|
|
|
|
- #address-cells : Must be 1
|
|
- #size-cells : Must be 0
|
|
|
|
Each port children node must have the following mandatory properties:
|
|
- reg : Describes the port address in the switch
|
|
|
|
An uplink/downlink port between switches in the cluster has the following
|
|
mandatory property:
|
|
|
|
- link : Should be a list of phandles to other switch's DSA
|
|
port. This port is used as the outgoing port
|
|
towards the phandle ports. The full routing
|
|
information must be given, not just the one hop
|
|
routes to neighbouring switches.
|
|
|
|
A CPU port has the following mandatory property:
|
|
|
|
- ethernet : Should be a phandle to a valid Ethernet device node.
|
|
This host device is what the switch port is
|
|
connected to.
|
|
|
|
A user port has the following optional property:
|
|
|
|
- label : Describes the label associated with this port, which
|
|
will become the netdev name.
|
|
|
|
Port child nodes may also contain the following optional standardised
|
|
properties, described in binding documents:
|
|
|
|
- phy-handle : Phandle to a PHY on an MDIO bus. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
- phy-mode : See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
- fixed-link : Fixed-link subnode describing a link to a non-MDIO
|
|
managed entity. See
|
|
Documentation/devicetree/bindings/net/fixed-link.txt
|
|
for details.
|
|
|
|
Example
|
|
|
|
The following example shows three switches on three MDIO busses,
|
|
linked into one DSA cluster.
|
|
|
|
&mdio1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch0: switch0@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
dsa,member = <0 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan0";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
switch0port5: port@5 {
|
|
reg = <5>;
|
|
phy-mode = "rgmii-txid";
|
|
link = <&switch1port6
|
|
&switch2port9>;
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&fec1>;
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch1: switch1@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
dsa,member = <0 1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan3";
|
|
phy-handle = <&switch1phy0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan4";
|
|
phy-handle = <&switch1phy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan5";
|
|
phy-handle = <&switch1phy2>;
|
|
};
|
|
|
|
switch1port5: port@5 {
|
|
reg = <5>;
|
|
link = <&switch2port9>;
|
|
phy-mode = "rgmii-txid";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
switch1port6: port@6 {
|
|
reg = <6>;
|
|
phy-mode = "rgmii-txid";
|
|
link = <&switch0port5>;
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
switch1phy0: switch1phy0@0 {
|
|
reg = <0>;
|
|
};
|
|
switch1phy1: switch1phy0@1 {
|
|
reg = <1>;
|
|
};
|
|
switch1phy2: switch1phy0@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch2: switch2@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
dsa,member = <0 2>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan6";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan7";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan8";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "optical3";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
link-gpios = <&gpio6 2
|
|
GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "optical4";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
link-gpios = <&gpio6 3
|
|
GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
switch2port9: port@9 {
|
|
reg = <9>;
|
|
phy-mode = "rgmii-txid";
|
|
link = <&switch1port5
|
|
&switch0port5>;
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
Deprecated Binding
|
|
------------------
|
|
|
|
The deprecated binding makes use of a platform device to represent the
|
|
switches. The switches themselves are not Linux devices, and make use
|
|
of an MDIO bus for management.
|
|
|
|
Required properties:
|
|
- compatible : Should be "marvell,dsa"
|
|
- #address-cells : Must be 2, first cell is the address on the MDIO bus
|
|
and second cell is the address in the switch tree.
|
|
Second cell is used only when cascading/chaining.
|
|
- #size-cells : Must be 0
|
|
- dsa,ethernet : Should be a phandle to a valid Ethernet device node
|
|
- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
|
|
|
|
Optional properties:
|
|
- interrupts : property with a value describing the switch
|
|
interrupt number (not supported by the driver)
|
|
|
|
A DSA node can contain multiple switch chips which are therefore child nodes of
|
|
the parent DSA node. The maximum number of allowed child nodes is 4
|
|
(DSA_MAX_SWITCHES).
|
|
Each of these switch child nodes should have the following required properties:
|
|
|
|
- reg : Contains two fields. The first one describes the
|
|
address on the MII bus. The second is the switch
|
|
number that must be unique in cascaded configurations
|
|
- #address-cells : Must be 1
|
|
- #size-cells : Must be 0
|
|
|
|
A switch child node has the following optional property:
|
|
|
|
- eeprom-length : Set to the length of an EEPROM connected to the
|
|
switch. Must be set if the switch can not detect
|
|
the presence and/or size of a connected EEPROM,
|
|
otherwise optional.
|
|
|
|
A switch may have multiple "port" children nodes
|
|
|
|
Each port children node must have the following mandatory properties:
|
|
- reg : Describes the port address in the switch
|
|
- label : Describes the label associated with this port, special
|
|
labels are "cpu" to indicate a CPU port and "dsa" to
|
|
indicate an uplink/downlink port.
|
|
|
|
Note that a port labelled "dsa" will imply checking for the uplink phandle
|
|
described below.
|
|
|
|
Optional property:
|
|
- link : Should be a list of phandles to another switch's DSA port.
|
|
This property is only used when switches are being
|
|
chained/cascaded together. This port is used as outgoing port
|
|
towards the phandle port, which can be more than one hop away.
|
|
|
|
- phy-handle : Phandle to a PHY on an external MDIO bus, not the
|
|
switch internal one. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
- phy-mode : String representing the connection to the designated
|
|
PHY node specified by the 'phy-handle' property. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
- mii-bus : Should be a phandle to a valid MDIO bus device node.
|
|
This mii-bus will be used in preference to the
|
|
global dsa,mii-bus defined above, for this switch.
|
|
|
|
Optional subnodes:
|
|
- fixed-link : Fixed-link subnode describing a link to a non-MDIO
|
|
managed entity. See
|
|
Documentation/devicetree/bindings/net/fixed-link.txt
|
|
for details.
|
|
|
|
Example:
|
|
|
|
dsa@0 {
|
|
compatible = "marvell,dsa";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
interrupts = <10>;
|
|
dsa,ethernet = <ðernet0>;
|
|
dsa,mii-bus = <&mii_bus0>;
|
|
|
|
switch@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <16 0>; /* MDIO address 16, switch 0 in tree */
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
};
|
|
|
|
switch0port6: port@6 {
|
|
reg = <6>;
|
|
label = "dsa";
|
|
link = <&switch1port0
|
|
&switch2port0>;
|
|
};
|
|
};
|
|
|
|
switch@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
|
|
mii-bus = <&mii_bus1>;
|
|
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
|
|
|
switch1port0: port@0 {
|
|
reg = <0>;
|
|
label = "dsa";
|
|
link = <&switch0port6>;
|
|
};
|
|
switch1port1: port@1 {
|
|
reg = <1>;
|
|
label = "dsa";
|
|
link = <&switch2port1>;
|
|
};
|
|
};
|
|
|
|
switch@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <18 2>; /* MDIO address 18, switch 2 in tree */
|
|
mii-bus = <&mii_bus1>;
|
|
|
|
switch2port0: port@0 {
|
|
reg = <0>;
|
|
label = "dsa";
|
|
link = <&switch1port1
|
|
&switch0port6>;
|
|
};
|
|
};
|
|
};
|
|
|