You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Gibson 22258fa40e [POWERPC] Enable RTC for Ebony and Walnut (v2) ... This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>		17 years ago
..
bestcomm	[POWERPC] arch/powerpc/: Spelling fixes	17 years ago
qe_lib	[POWERPC] QE: Add support for Freescale QUICCEngine UART	17 years ago
Kconfig	[POWERPC] 4xx: PLB to PCI Express support	17 years ago
Makefile	[POWERPC] Enable RTC for Ebony and Walnut (v2)	17 years ago
axonram.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	17 years ago
commproc.c	[POWERPC] Move CPM command handling into the cpm drivers	17 years ago
commproc.h	[POWERPC] 8xx: Infrastructure code cleanup.	18 years ago
cpm2_common.c	Merge branch 'linux-2.6'	17 years ago
cpm2_pic.c	[POWERPC] cpm2: Infrastructure code cleanup.	18 years ago
cpm2_pic.h	[POWERPC] cpm2: CPM2 interrupt controller fix	18 years ago
cpm_common.c	[POWERPC] cpm: Fix a couple minor issues in cpm_common.c.	17 years ago
dart.h	…
dart_iommu.c	[POWERPC] Fix section mismatch in dart_iommu.c	18 years ago
dcr-low.S	…
dcr.c	Use dcr_host_t.base in dcr_unmap()	18 years ago
fsl_pci.c	[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx	17 years ago
fsl_pci.h	[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected	18 years ago
fsl_rio.c	[POWERPC] Move RapidIO support code from arch/ppc	17 years ago
fsl_rio.h	[POWERPC] Move RapidIO support code from arch/ppc	17 years ago
fsl_soc.c	[POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.	17 years ago
fsl_soc.h	[POWERPC] 85xx/86xx: refactor RSTCR reset code	18 years ago
grackle.c	[POWERPC] pci32: Add flags modifying the PCI code behaviour	17 years ago
i8259.c	[POWERPC] i8259: Add disable method	18 years ago
indirect_pci.c	[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci	18 years ago
ipic.c	[POWERPC] Add support for mpc512x interrupts to ipic	17 years ago
ipic.h	[POWERPC] ipic: ack only for edge interrupts	17 years ago
micropatch.c	…
mmio_nvram.c	[POWERPC] arch/powerpc/: Spelling fixes	17 years ago
mpc8xx_pic.c	[POWERPC] 8xx: Infrastructure code cleanup.	18 years ago
mpc8xx_pic.h	[POWERPC] 8xx: mpc885ads pcmcia support	18 years ago
mpic.c	[POWERPC] Fixup use of phys_addr_t in mpic code	17 years ago
mpic.h	[POWERPC] pasemi: Implement NMI support	17 years ago
mpic_msi.c	[POWERPC] Fix section mismatch in PCI code	18 years ago
mpic_pasemi_msi.c	[POWERPC] pasemi: Implement MSI support	17 years ago
mpic_u3msi.c	[POWERPC] Inline u3msi_compose_msi_msg()	18 years ago
mv64x60.h	[POWERPC] Add Marvell mv64x60 udbg putc/getc functions	18 years ago
mv64x60_dev.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	17 years ago
mv64x60_pci.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	17 years ago
mv64x60_pic.c	[POWERPC] Provide a default irq_host match, which matches on an exact of_node	18 years ago
mv64x60_udbg.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	17 years ago
of_rtc.c	[POWERPC] Enable RTC for Ebony and Walnut (v2)	17 years ago
pmi.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	17 years ago
ppc4xx_pci.c	[POWERPC] 4xx: PCIe: Increase max busses per port to 64	17 years ago
ppc4xx_pci.h	[POWERPC] 4xx: PCI-E Link setup improvements	17 years ago
rtc_cmos_setup.c	[POWERPC] Add interrupt resource for RTC CMOS driver	18 years ago
tsi108_dev.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	17 years ago
tsi108_pci.c	[POWERPC] Provide a default irq_host match, which matches on an exact of_node	18 years ago
uic.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	17 years ago
xilinx_intc.c	[POWERPC] Xilinx: update compatible list for interrupt controller	17 years ago