You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
599 lines
18 KiB
599 lines
18 KiB
/*
|
|
* Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
|
|
*
|
|
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
|
|
*
|
|
* Based on code from Kirk Lapray <kirk_lapray@bigfoot.com>
|
|
* Copyright (C) 2005
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* NOTES ABOUT THIS DRIVER
|
|
*
|
|
* This driver supports DViCO FusionHDTV 3 Gold under Linux.
|
|
*
|
|
* TODO:
|
|
* BER and signal strength always return 0.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "dvb-pll.h"
|
|
#include "lgdt3302_priv.h"
|
|
#include "lgdt3302.h"
|
|
|
|
static int debug = 0;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug,"Turn on/off lgdt3302 frontend debugging (default:off).");
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "lgdt3302: " args); \
|
|
} while (0)
|
|
|
|
struct lgdt3302_state
|
|
{
|
|
struct i2c_adapter* i2c;
|
|
struct dvb_frontend_ops ops;
|
|
|
|
/* Configuration settings */
|
|
const struct lgdt3302_config* config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
/* Demodulator private data */
|
|
fe_modulation_t current_modulation;
|
|
|
|
/* Tuner private data */
|
|
u32 current_frequency;
|
|
};
|
|
|
|
static int i2c_writebytes (struct lgdt3302_state* state,
|
|
u8 addr, /* demod_address or pll_address */
|
|
u8 *buf, /* data bytes to send */
|
|
int len /* number of bytes to send */ )
|
|
{
|
|
if (addr == state->config->pll_address) {
|
|
struct i2c_msg msg =
|
|
{ .addr = addr, .flags = 0, .buf = buf, .len = len };
|
|
int err;
|
|
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
|
|
if (err < 0)
|
|
return err;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
} else {
|
|
u8 tmp[] = { buf[0], buf[1] };
|
|
struct i2c_msg msg =
|
|
{ .addr = addr, .flags = 0, .buf = tmp, .len = 2 };
|
|
int err;
|
|
int i;
|
|
|
|
for (i=1; i<len; i++) {
|
|
tmp[1] = buf[i];
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
|
|
if (err < 0)
|
|
return err;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
tmp[0]++;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
static int i2c_readbytes (struct lgdt3302_state* state,
|
|
u8 addr, /* demod_address or pll_address */
|
|
u8 *buf, /* holds data bytes read */
|
|
int len /* number of bytes to read */ )
|
|
{
|
|
struct i2c_msg msg =
|
|
{ .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len };
|
|
int err;
|
|
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt3302: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This routine writes the register (reg) to the demod bus
|
|
* then reads the data returned for (len) bytes.
|
|
*/
|
|
|
|
static u8 i2c_selectreadbytes (struct lgdt3302_state* state,
|
|
enum I2C_REG reg, u8* buf, int len)
|
|
{
|
|
u8 wr [] = { reg };
|
|
struct i2c_msg msg [] = {
|
|
{ .addr = state->config->demod_address,
|
|
.flags = 0, .buf = wr, .len = 1 },
|
|
{ .addr = state->config->demod_address,
|
|
.flags = I2C_M_RD, .buf = buf, .len = len },
|
|
};
|
|
int ret;
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
if (ret != 2) {
|
|
printk(KERN_WARNING "lgdt3302: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Software reset */
|
|
int lgdt3302_SwReset(struct lgdt3302_state* state)
|
|
{
|
|
u8 ret;
|
|
u8 reset[] = {
|
|
IRQ_MASK,
|
|
0x00 /* bit 6 is active low software reset
|
|
* bits 5-0 are 1 to mask interrupts */
|
|
};
|
|
|
|
ret = i2c_writebytes(state,
|
|
state->config->demod_address,
|
|
reset, sizeof(reset));
|
|
if (ret == 0) {
|
|
/* spec says reset takes 100 ns why wait */
|
|
/* mdelay(100); */ /* keep low for 100mS */
|
|
reset[1] = 0x7f; /* force reset high (inactive)
|
|
* and unmask interrupts */
|
|
ret = i2c_writebytes(state,
|
|
state->config->demod_address,
|
|
reset, sizeof(reset));
|
|
}
|
|
/* Spec does not indicate a need for this either */
|
|
/*mdelay(5); */ /* wait 5 msec before doing more */
|
|
return ret;
|
|
}
|
|
|
|
static int lgdt3302_init(struct dvb_frontend* fe)
|
|
{
|
|
/* Hardware reset is done using gpio[0] of cx23880x chip.
|
|
* I'd like to do it here, but don't know how to find chip address.
|
|
* cx88-cards.c arranges for the reset bit to be inactive (high).
|
|
* Maybe there needs to be a callable function in cx88-core or
|
|
* the caller of this function needs to do it. */
|
|
|
|
dprintk("%s entered\n", __FUNCTION__);
|
|
return lgdt3302_SwReset((struct lgdt3302_state*) fe->demodulator_priv);
|
|
}
|
|
|
|
static int lgdt3302_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
*ber = 0; /* Dummy out for now */
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv;
|
|
u8 buf[2];
|
|
|
|
i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf));
|
|
|
|
*ucblocks = (buf[0] << 8) | buf[1];
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_set_parameters(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *param)
|
|
{
|
|
u8 buf[4];
|
|
struct lgdt3302_state* state =
|
|
(struct lgdt3302_state*) fe->demodulator_priv;
|
|
|
|
/* Use 50MHz parameter values from spec sheet since xtal is 50 */
|
|
static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
|
|
static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 };
|
|
static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb };
|
|
static u8 agc_rf_cfg[] = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 };
|
|
static u8 agc_ctrl_cfg[] = { AGC_FUNC_CTRL2, 0xc6, 0x40 };
|
|
static u8 agc_delay_cfg[] = { AGC_DELAY0, 0x07, 0x00, 0xfe };
|
|
static u8 agc_loop_cfg[] = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a };
|
|
|
|
/* Change only if we are actually changing the modulation */
|
|
if (state->current_modulation != param->u.vsb.modulation) {
|
|
switch(param->u.vsb.modulation) {
|
|
case VSB_8:
|
|
dprintk("%s: VSB_8 MODE\n", __FUNCTION__);
|
|
|
|
/* Select VSB mode and serial MPEG interface */
|
|
top_ctrl_cfg[1] = 0x07;
|
|
break;
|
|
|
|
case QAM_64:
|
|
dprintk("%s: QAM_64 MODE\n", __FUNCTION__);
|
|
|
|
/* Select QAM_64 mode and serial MPEG interface */
|
|
top_ctrl_cfg[1] = 0x04;
|
|
break;
|
|
|
|
case QAM_256:
|
|
dprintk("%s: QAM_256 MODE\n", __FUNCTION__);
|
|
|
|
/* Select QAM_256 mode and serial MPEG interface */
|
|
top_ctrl_cfg[1] = 0x05;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "lgdt3302: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation);
|
|
return -1;
|
|
}
|
|
/* Initializations common to all modes */
|
|
|
|
/* Select the requested mode */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
top_ctrl_cfg, sizeof(top_ctrl_cfg));
|
|
|
|
/* Change the value of IFBW[11:0]
|
|
of AGC IF/RF loop filter bandwidth register */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
agc_rf_cfg, sizeof(agc_rf_cfg));
|
|
|
|
/* Change the value of bit 6, 'nINAGCBY' and
|
|
'NSSEL[1:0] of ACG function control register 2 */
|
|
/* Change the value of bit 6 'RFFIX'
|
|
of AGC function control register 3 */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
agc_ctrl_cfg, sizeof(agc_ctrl_cfg));
|
|
|
|
/* Change the TPCLK pin polarity
|
|
data is valid on falling clock */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
demux_ctrl_cfg, sizeof(demux_ctrl_cfg));
|
|
|
|
/* Change the value of NCOCTFV[25:0] of carrier
|
|
recovery center frequency register */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
vsb_freq_cfg, sizeof(vsb_freq_cfg));
|
|
|
|
/* Set the value of 'INLVTHD' register 0x2a/0x2c to 0x7fe */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
agc_delay_cfg, sizeof(agc_delay_cfg));
|
|
|
|
/* Change the value of IAGCBW[15:8]
|
|
of inner AGC loop filter bandwith */
|
|
i2c_writebytes(state, state->config->demod_address,
|
|
agc_loop_cfg, sizeof(agc_loop_cfg));
|
|
|
|
state->config->set_ts_params(fe, 0);
|
|
state->current_modulation = param->u.vsb.modulation;
|
|
}
|
|
|
|
/* Change only if we are actually changing the channel */
|
|
if (state->current_frequency != param->frequency) {
|
|
dvb_pll_configure(state->config->pll_desc, buf,
|
|
param->frequency, 0);
|
|
dprintk("%s: tuner bytes: 0x%02x 0x%02x "
|
|
"0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]);
|
|
i2c_writebytes(state, state->config->pll_address ,buf, 4);
|
|
|
|
/* Check the status of the tuner pll */
|
|
i2c_readbytes(state, state->config->pll_address, buf, 1);
|
|
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
|
|
/* Update current frequency */
|
|
state->current_frequency = param->frequency;
|
|
}
|
|
lgdt3302_SwReset(state);
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_get_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters* param)
|
|
{
|
|
struct lgdt3302_state *state = fe->demodulator_priv;
|
|
param->frequency = state->current_frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv;
|
|
u8 buf[3];
|
|
|
|
*status = 0; /* Reset status result */
|
|
|
|
/* Check the status of the tuner pll */
|
|
i2c_readbytes(state, state->config->pll_address, buf, 1);
|
|
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
if ((buf[0] & 0xc0) != 0x40)
|
|
return 0; /* Tuner PLL not locked or not powered on */
|
|
|
|
/*
|
|
* You must set the Mask bits to 1 in the IRQ_MASK in order
|
|
* to see that status bit in the IRQ_STATUS register.
|
|
* This is done in SwReset();
|
|
*/
|
|
|
|
/* AGC status register */
|
|
i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
|
|
dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
if ((buf[0] & 0x0c) == 0x8){
|
|
/* Test signal does not exist flag */
|
|
/* as well as the AGC lock flag. */
|
|
*status |= FE_HAS_SIGNAL;
|
|
} else {
|
|
/* Without a signal all other status bits are meaningless */
|
|
return 0;
|
|
}
|
|
|
|
/* signal status */
|
|
i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf));
|
|
dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]);
|
|
|
|
#if 0
|
|
/* Alternative method to check for a signal */
|
|
/* using the SNR good/bad interrupts. */
|
|
if ((buf[2] & 0x30) == 0x10)
|
|
*status |= FE_HAS_SIGNAL;
|
|
#endif
|
|
|
|
/* sync status */
|
|
if ((buf[2] & 0x03) == 0x01) {
|
|
*status |= FE_HAS_SYNC;
|
|
}
|
|
|
|
/* FEC error status */
|
|
if ((buf[2] & 0x0c) == 0x08) {
|
|
*status |= FE_HAS_LOCK;
|
|
*status |= FE_HAS_VITERBI;
|
|
}
|
|
|
|
/* Carrier Recovery Lock Status Register */
|
|
i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1);
|
|
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
|
|
switch (state->current_modulation) {
|
|
case QAM_256:
|
|
case QAM_64:
|
|
/* Need to undestand why there are 3 lock levels here */
|
|
if ((buf[0] & 0x07) == 0x07)
|
|
*status |= FE_HAS_CARRIER;
|
|
break;
|
|
case VSB_8:
|
|
if ((buf[0] & 0x80) == 0x80)
|
|
*status |= FE_HAS_CARRIER;
|
|
break;
|
|
default:
|
|
printk("KERN_WARNING lgdt3302: %s: Modulation set to unsupported value\n", __FUNCTION__);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
/* not directly available. */
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
#ifdef SNR_IN_DB
|
|
/*
|
|
* Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise)
|
|
* and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker
|
|
* respectively. The following tables are built on these formulas.
|
|
* The usual definition is SNR = 20 log10(signal/noise)
|
|
* If the specification is wrong the value retuned is 1/2 the actual SNR in db.
|
|
*
|
|
* This table is a an ordered list of noise values computed by the
|
|
* formula from the spec sheet such that the index into the table
|
|
* starting at 43 or 45 is the SNR value in db. There are duplicate noise
|
|
* value entries at the beginning because the SNR varies more than
|
|
* 1 db for a change of 1 digit in noise at very small values of noise.
|
|
*
|
|
* Examples from SNR_EQ table:
|
|
* noise SNR
|
|
* 0 43
|
|
* 1 42
|
|
* 2 39
|
|
* 3 37
|
|
* 4 36
|
|
* 5 35
|
|
* 6 34
|
|
* 7 33
|
|
* 8 33
|
|
* 9 32
|
|
* 10 32
|
|
* 11 31
|
|
* 12 31
|
|
* 13 30
|
|
*/
|
|
|
|
static const u32 SNR_EQ[] =
|
|
{ 1, 2, 2, 2, 3, 3, 4, 4, 5, 7,
|
|
9, 11, 13, 17, 21, 26, 33, 41, 52, 65,
|
|
81, 102, 129, 162, 204, 257, 323, 406, 511, 644,
|
|
810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433,
|
|
8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323,
|
|
80978, 101945, 128341, 161571, 203406, 256073, 0x40000
|
|
};
|
|
|
|
static const u32 SNR_PH[] =
|
|
{ 1, 2, 2, 2, 3, 3, 4, 5, 6, 8,
|
|
10, 12, 15, 19, 23, 29, 37, 46, 58, 73,
|
|
91, 115, 144, 182, 229, 288, 362, 456, 574, 722,
|
|
909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216,
|
|
9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151,
|
|
90833, 114351, 143960, 181235, 228161, 0x040000
|
|
};
|
|
|
|
static u8 buf[5];/* read data buffer */
|
|
static u32 noise; /* noise value */
|
|
static u32 snr_db; /* index into SNR_EQ[] */
|
|
struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv;
|
|
|
|
/* read both equalizer and pase tracker noise data */
|
|
i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf));
|
|
|
|
if (state->current_modulation == VSB_8) {
|
|
/* Equalizer Mean-Square Error Register for VSB */
|
|
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
|
|
|
|
/*
|
|
* Look up noise value in table.
|
|
* A better search algorithm could be used...
|
|
* watch out there are duplicate entries.
|
|
*/
|
|
for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) {
|
|
if (noise < SNR_EQ[snr_db]) {
|
|
*snr = 43 - snr_db;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/* Phase Tracker Mean-Square Error Register for QAM */
|
|
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
|
|
|
|
/* Look up noise value in table. */
|
|
for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) {
|
|
if (noise < SNR_PH[snr_db]) {
|
|
*snr = 45 - snr_db;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
/* Return the raw noise value */
|
|
static u8 buf[5];/* read data buffer */
|
|
static u32 noise; /* noise value */
|
|
struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv;
|
|
|
|
/* read both equalizer and pase tracker noise data */
|
|
i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf));
|
|
|
|
if (state->current_modulation == VSB_8) {
|
|
/* Equalizer Mean-Square Error Register for VSB */
|
|
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
|
|
} else {
|
|
/* Phase Tracker Mean-Square Error Register for QAM */
|
|
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
|
|
}
|
|
|
|
/* Small values for noise mean signal is better so invert noise */
|
|
/* Noise is 19 bit value so discard 3 LSB*/
|
|
*snr = ~noise>>3;
|
|
#endif
|
|
|
|
dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lgdt3302_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
|
|
{
|
|
/* I have no idea about this - it may not be needed */
|
|
fe_tune_settings->min_delay_ms = 500;
|
|
fe_tune_settings->step_size = 0;
|
|
fe_tune_settings->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void lgdt3302_release(struct dvb_frontend* fe)
|
|
{
|
|
struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops lgdt3302_ops;
|
|
|
|
struct dvb_frontend* lgdt3302_attach(const struct lgdt3302_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct lgdt3302_state* state = NULL;
|
|
u8 buf[1];
|
|
|
|
/* Allocate memory for the internal state */
|
|
state = (struct lgdt3302_state*) kmalloc(sizeof(struct lgdt3302_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
memset(state,0,sizeof(*state));
|
|
|
|
/* Setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops));
|
|
/* Verify communication with demod chip */
|
|
if (i2c_selectreadbytes(state, 2, buf, 1))
|
|
goto error;
|
|
|
|
state->current_frequency = -1;
|
|
state->current_modulation = -1;
|
|
|
|
/* Create dvb_frontend */
|
|
state->frontend.ops = &state->ops;
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
if (state)
|
|
kfree(state);
|
|
dprintk("%s: ERROR\n",__FUNCTION__);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops lgdt3302_ops = {
|
|
.info = {
|
|
.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
|
|
.type = FE_ATSC,
|
|
.frequency_min= 54000000,
|
|
.frequency_max= 858000000,
|
|
.frequency_stepsize= 62500,
|
|
/* Symbol rate is for all VSB modes need to check QAM */
|
|
.symbol_rate_min = 10762000,
|
|
.symbol_rate_max = 10762000,
|
|
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
|
|
},
|
|
.init = lgdt3302_init,
|
|
.set_frontend = lgdt3302_set_parameters,
|
|
.get_frontend = lgdt3302_get_frontend,
|
|
.get_tune_settings = lgdt3302_get_tune_settings,
|
|
.read_status = lgdt3302_read_status,
|
|
.read_ber = lgdt3302_read_ber,
|
|
.read_signal_strength = lgdt3302_read_signal_strength,
|
|
.read_snr = lgdt3302_read_snr,
|
|
.read_ucblocks = lgdt3302_read_ucblocks,
|
|
.release = lgdt3302_release,
|
|
};
|
|
|
|
MODULE_DESCRIPTION("LGDT3302 [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
|
|
MODULE_AUTHOR("Wilson Michaels");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(lgdt3302_attach);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* compile-command: "make DVB=1"
|
|
* End:
|
|
*/
|
|
|