You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
785 lines
22 KiB
785 lines
22 KiB
/*
|
|
* Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
|
|
*
|
|
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
|
|
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
|
|
*
|
|
* This file is licensed under GPLv2.
|
|
*
|
|
* This file is part of the aic94xx driver.
|
|
*
|
|
* The aic94xx driver is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; version 2 of the
|
|
* License.
|
|
*
|
|
* The aic94xx driver is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with the aic94xx driver; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef _AIC94XX_SAS_H_
|
|
#define _AIC94XX_SAS_H_
|
|
|
|
#include <scsi/libsas.h>
|
|
|
|
/* ---------- DDBs ---------- */
|
|
/* DDBs are device descriptor blocks which describe a device in the
|
|
* domain that this sequencer can maintain low-level connections for
|
|
* us. They are be 64 bytes.
|
|
*/
|
|
|
|
struct asd_ddb_ssp_smp_target_port {
|
|
u8 conn_type; /* byte 0 */
|
|
#define DDB_TP_CONN_TYPE 0x81 /* Initiator port and addr frame type 0x01 */
|
|
|
|
u8 conn_rate;
|
|
__be16 init_conn_tag;
|
|
u8 dest_sas_addr[8]; /* bytes 4-11 */
|
|
|
|
__le16 send_queue_head;
|
|
u8 sq_suspended;
|
|
u8 ddb_type; /* DDB_TYPE_TARGET */
|
|
#define DDB_TYPE_UNUSED 0xFF
|
|
#define DDB_TYPE_TARGET 0xFE
|
|
#define DDB_TYPE_INITIATOR 0xFD
|
|
#define DDB_TYPE_PM_PORT 0xFC
|
|
|
|
__le16 _r_a;
|
|
__be16 awt_def;
|
|
|
|
u8 compat_features; /* byte 20 */
|
|
u8 pathway_blocked_count;
|
|
__be16 arb_wait_time;
|
|
__be32 more_compat_features; /* byte 24 */
|
|
|
|
u8 conn_mask;
|
|
u8 flags; /* concurrent conn:2,2 and open:0(1) */
|
|
#define CONCURRENT_CONN_SUPP 0x04
|
|
#define OPEN_REQUIRED 0x01
|
|
|
|
u16 _r_b;
|
|
__le16 exec_queue_tail;
|
|
__le16 send_queue_tail;
|
|
__le16 sister_ddb;
|
|
|
|
__le16 _r_c;
|
|
|
|
u8 max_concurrent_conn;
|
|
u8 num_concurrent_conn;
|
|
u8 num_contexts;
|
|
|
|
u8 _r_d;
|
|
|
|
__le16 active_task_count;
|
|
|
|
u8 _r_e[9];
|
|
|
|
u8 itnl_reason; /* I_T nexus loss reason */
|
|
|
|
__le16 _r_f;
|
|
|
|
__le16 itnl_timeout;
|
|
#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
|
|
|
|
__le32 itnl_timestamp;
|
|
} __attribute__ ((packed));
|
|
|
|
struct asd_ddb_stp_sata_target_port {
|
|
u8 conn_type; /* byte 0 */
|
|
u8 conn_rate;
|
|
__be16 init_conn_tag;
|
|
u8 dest_sas_addr[8]; /* bytes 4-11 */
|
|
|
|
__le16 send_queue_head;
|
|
u8 sq_suspended;
|
|
u8 ddb_type; /* DDB_TYPE_TARGET */
|
|
|
|
__le16 _r_a;
|
|
|
|
__be16 awt_def;
|
|
u8 compat_features; /* byte 20 */
|
|
u8 pathway_blocked_count;
|
|
__be16 arb_wait_time;
|
|
__be32 more_compat_features; /* byte 24 */
|
|
|
|
u8 conn_mask;
|
|
u8 flags; /* concurrent conn:2,2 and open:0(1) */
|
|
#define SATA_MULTIPORT 0x80
|
|
#define SUPPORTS_AFFIL 0x40
|
|
#define STP_AFFIL_POL 0x20
|
|
|
|
u8 _r_b;
|
|
u8 flags2; /* STP close policy:0 */
|
|
#define STP_CL_POL_NO_TX 0x00
|
|
#define STP_CL_POL_BTW_CMDS 0x01
|
|
|
|
__le16 exec_queue_tail;
|
|
__le16 send_queue_tail;
|
|
__le16 sister_ddb;
|
|
__le16 ata_cmd_scbptr;
|
|
__le32 sata_tag_alloc_mask;
|
|
__le16 active_task_count;
|
|
__le16 _r_c;
|
|
__le32 sata_sactive;
|
|
u8 num_sata_tags;
|
|
u8 sata_status;
|
|
u8 sata_ending_status;
|
|
u8 itnl_reason; /* I_T nexus loss reason */
|
|
__le16 ncq_data_scb_ptr;
|
|
__le16 itnl_timeout;
|
|
__le32 itnl_timestamp;
|
|
} __attribute__ ((packed));
|
|
|
|
/* This struct asd_ddb_init_port, describes the device descriptor block
|
|
* of an initiator port (when the sequencer is operating in target mode).
|
|
* Bytes [0,11] and [20,27] are from the OPEN address frame.
|
|
* The sequencer allocates an initiator port DDB entry.
|
|
*/
|
|
struct asd_ddb_init_port {
|
|
u8 conn_type; /* byte 0 */
|
|
u8 conn_rate;
|
|
__be16 init_conn_tag; /* BE */
|
|
u8 dest_sas_addr[8];
|
|
__le16 send_queue_head; /* LE, byte 12 */
|
|
u8 sq_suspended;
|
|
u8 ddb_type; /* DDB_TYPE_INITIATOR */
|
|
__le16 _r_a;
|
|
__be16 awt_def; /* BE */
|
|
u8 compat_features;
|
|
u8 pathway_blocked_count;
|
|
__be16 arb_wait_time; /* BE */
|
|
__be32 more_compat_features; /* BE */
|
|
u8 conn_mask;
|
|
u8 flags; /* == 5 */
|
|
u16 _r_b;
|
|
__le16 exec_queue_tail; /* execution queue tail */
|
|
__le16 send_queue_tail;
|
|
__le16 sister_ddb;
|
|
__le16 init_resp_timeout; /* initiator response timeout */
|
|
__le32 _r_c;
|
|
__le16 active_tasks; /* active task count */
|
|
__le16 init_list; /* initiator list link pointer */
|
|
__le32 _r_d;
|
|
u8 max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
|
|
u8 itnl_reason; /* I_T nexus loss reason */
|
|
__le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
|
|
__le16 itnl_to; /* from the Protocol Specific Port Ctrl MP */
|
|
__le32 itnl_timestamp;
|
|
} __attribute__ ((packed));
|
|
|
|
/* This struct asd_ddb_sata_tag, describes a look-up table to be used
|
|
* by the sequencers. SATA II, IDENTIFY DEVICE data, word 76, bit 8:
|
|
* NCQ support. This table is used by the sequencers to find the
|
|
* corresponding SCB, given a SATA II tag value.
|
|
*/
|
|
struct asd_ddb_sata_tag {
|
|
__le16 scb_pointer[32];
|
|
} __attribute__ ((packed));
|
|
|
|
/* This struct asd_ddb_sata_pm_table, describes a port number to
|
|
* connection handle look-up table. SATA targets attached to a port
|
|
* multiplier require a 4-bit port number value. There is one DDB
|
|
* entry of this type for each SATA port multiplier (sister DDB).
|
|
* Given a SATA PM port number, this table gives us the SATA PM Port
|
|
* DDB of the SATA port multiplier port (i.e. the SATA target
|
|
* discovered on the port).
|
|
*/
|
|
struct asd_ddb_sata_pm_table {
|
|
__le16 ddb_pointer[16];
|
|
__le16 _r_a[16];
|
|
} __attribute__ ((packed));
|
|
|
|
/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
|
|
* port format DDB.
|
|
*/
|
|
struct asd_ddb_sata_pm_port {
|
|
u8 _r_a[15];
|
|
u8 ddb_type;
|
|
u8 _r_b[13];
|
|
u8 pm_port_flags;
|
|
#define PM_PORT_MASK 0xF0
|
|
#define PM_PORT_SET 0x02
|
|
u8 _r_c[6];
|
|
__le16 sister_ddb;
|
|
__le16 ata_cmd_scbptr;
|
|
__le32 sata_tag_alloc_mask;
|
|
__le16 active_task_count;
|
|
__le16 parent_ddb;
|
|
__le32 sata_sactive;
|
|
u8 num_sata_tags;
|
|
u8 sata_status;
|
|
u8 sata_ending_status;
|
|
u8 _r_d[9];
|
|
} __attribute__ ((packed));
|
|
|
|
/* This struct asd_ddb_seq_shared, describes a DDB shared by the
|
|
* central and link sequencers. port_map_by_links is indexed phy
|
|
* number [0,7]; each byte is a bit mask of all the phys that are in
|
|
* the same port as the indexed phy.
|
|
*/
|
|
struct asd_ddb_seq_shared {
|
|
__le16 q_free_ddb_head;
|
|
__le16 q_free_ddb_tail;
|
|
__le16 q_free_ddb_cnt;
|
|
__le16 q_used_ddb_head;
|
|
__le16 q_used_ddb_tail;
|
|
__le16 shared_mem_lock;
|
|
__le16 smp_conn_tag;
|
|
__le16 est_nexus_buf_cnt;
|
|
__le16 est_nexus_buf_thresh;
|
|
u32 _r_a;
|
|
u8 settable_max_contexts;
|
|
u8 _r_b[23];
|
|
u8 conn_not_active;
|
|
u8 phy_is_up;
|
|
u8 _r_c[8];
|
|
u8 port_map_by_links[8];
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- SG Element ---------- */
|
|
|
|
/* This struct sg_el, describes the hardware scatter gather buffer
|
|
* element. All entries are little endian. In an SCB, there are 2 of
|
|
* this, plus one more, called a link element of this indicating a
|
|
* sublist if needed.
|
|
*
|
|
* A link element has only the bus address set and the flags (DS) bit
|
|
* valid. The bus address points to the start of the sublist.
|
|
*
|
|
* If a sublist is needed, then that sublist should also include the 2
|
|
* sg_el embedded in the SCB, in which case next_sg_offset is 32,
|
|
* since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
|
|
*/
|
|
struct sg_el {
|
|
__le64 bus_addr;
|
|
__le32 size;
|
|
__le16 _r;
|
|
u8 next_sg_offs;
|
|
u8 flags;
|
|
#define ASD_SG_EL_DS_MASK 0x30
|
|
#define ASD_SG_EL_DS_OCM 0x10
|
|
#define ASD_SG_EL_DS_HM 0x00
|
|
#define ASD_SG_EL_LIST_MASK 0xC0
|
|
#define ASD_SG_EL_LIST_EOL 0x40
|
|
#define ASD_SG_EL_LIST_EOS 0x80
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- SCBs ---------- */
|
|
|
|
/* An SCB (sequencer control block) is comprised of a common header
|
|
* and a task part, for a total of 128 bytes. All fields are in LE
|
|
* order, unless otherwise noted.
|
|
*/
|
|
|
|
/* This struct scb_header, defines the SCB header format.
|
|
*/
|
|
struct scb_header {
|
|
__le64 next_scb;
|
|
__le16 index; /* transaction context */
|
|
u8 opcode;
|
|
} __attribute__ ((packed));
|
|
|
|
/* SCB opcodes: Execution queue
|
|
*/
|
|
#define INITIATE_SSP_TASK 0x00
|
|
#define INITIATE_LONG_SSP_TASK 0x01
|
|
#define INITIATE_BIDIR_SSP_TASK 0x02
|
|
#define ABORT_TASK 0x03
|
|
#define INITIATE_SSP_TMF 0x04
|
|
#define SSP_TARG_GET_DATA 0x05
|
|
#define SSP_TARG_GET_DATA_GOOD 0x06
|
|
#define SSP_TARG_SEND_RESP 0x07
|
|
#define QUERY_SSP_TASK 0x08
|
|
#define INITIATE_ATA_TASK 0x09
|
|
#define INITIATE_ATAPI_TASK 0x0a
|
|
#define CONTROL_ATA_DEV 0x0b
|
|
#define INITIATE_SMP_TASK 0x0c
|
|
#define SMP_TARG_SEND_RESP 0x0f
|
|
|
|
/* SCB opcodes: Send Queue
|
|
*/
|
|
#define SSP_TARG_SEND_DATA 0x40
|
|
#define SSP_TARG_SEND_DATA_GOOD 0x41
|
|
|
|
/* SCB opcodes: Link Queue
|
|
*/
|
|
#define CONTROL_PHY 0x80
|
|
#define SEND_PRIMITIVE 0x81
|
|
#define INITIATE_LINK_ADM_TASK 0x82
|
|
|
|
/* SCB opcodes: other
|
|
*/
|
|
#define EMPTY_SCB 0xc0
|
|
#define INITIATE_SEQ_ADM_TASK 0xc1
|
|
#define EST_ICL_TARG_WINDOW 0xc2
|
|
#define COPY_MEM 0xc3
|
|
#define CLEAR_NEXUS 0xc4
|
|
#define INITIATE_DDB_ADM_TASK 0xc6
|
|
#define ESTABLISH_NEXUS_ESCB 0xd0
|
|
|
|
#define LUN_SIZE 8
|
|
|
|
/* See SAS spec, task IU
|
|
*/
|
|
struct ssp_task_iu {
|
|
u8 lun[LUN_SIZE]; /* BE */
|
|
u16 _r_a;
|
|
u8 tmf;
|
|
u8 _r_b;
|
|
__be16 tag; /* BE */
|
|
u8 _r_c[14];
|
|
} __attribute__ ((packed));
|
|
|
|
/* See SAS spec, command IU
|
|
*/
|
|
struct ssp_command_iu {
|
|
u8 lun[LUN_SIZE];
|
|
u8 _r_a;
|
|
u8 efb_prio_attr; /* enable first burst, task prio & attr */
|
|
#define EFB_MASK 0x80
|
|
#define TASK_PRIO_MASK 0x78
|
|
#define TASK_ATTR_MASK 0x07
|
|
|
|
u8 _r_b;
|
|
u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
|
|
union {
|
|
u8 cdb[16];
|
|
struct {
|
|
__le64 long_cdb_addr; /* bus address, LE */
|
|
__le32 long_cdb_size; /* LE */
|
|
u8 _r_c[3];
|
|
u8 eol_ds; /* eol:6,6, ds:5,4 */
|
|
} long_cdb; /* sequencer extension */
|
|
};
|
|
} __attribute__ ((packed));
|
|
|
|
struct xfer_rdy_iu {
|
|
__be32 requested_offset; /* BE */
|
|
__be32 write_data_len; /* BE */
|
|
__be32 _r_a;
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- SCB tasks ---------- */
|
|
|
|
/* This is both ssp_task and long_ssp_task
|
|
*/
|
|
struct initiate_ssp_task {
|
|
u8 proto_conn_rate; /* proto:6,4, conn_rate:3,0 */
|
|
__le32 total_xfer_len;
|
|
struct ssp_frame_hdr ssp_frame;
|
|
struct ssp_command_iu ssp_cmd;
|
|
__le16 sister_scb; /* 0xFFFF */
|
|
__le16 conn_handle; /* index to DDB for the intended target */
|
|
u8 data_dir; /* :1,0 */
|
|
#define DATA_DIR_NONE 0x00
|
|
#define DATA_DIR_IN 0x01
|
|
#define DATA_DIR_OUT 0x02
|
|
#define DATA_DIR_BYRECIPIENT 0x03
|
|
|
|
u8 _r_a;
|
|
u8 retry_count;
|
|
u8 _r_b[5];
|
|
struct sg_el sg_element[3]; /* 2 real and 1 link */
|
|
} __attribute__ ((packed));
|
|
|
|
/* This defines both ata_task and atapi_task.
|
|
* ata: C bit of FIS should be 1,
|
|
* atapi: C bit of FIS should be 1, and command register should be 0xA0,
|
|
* to indicate a packet command.
|
|
*/
|
|
struct initiate_ata_task {
|
|
u8 proto_conn_rate;
|
|
__le32 total_xfer_len;
|
|
struct host_to_dev_fis fis;
|
|
__le32 data_offs;
|
|
u8 atapi_packet[16];
|
|
u8 _r_a[12];
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 ata_flags; /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
|
|
#define CSMI_TASK 0x40
|
|
#define DATA_XFER_MODE_DMA 0x10
|
|
#define ATA_Q_TYPE_MASK 0x08
|
|
#define ATA_Q_TYPE_UNTAGGED 0x00
|
|
#define ATA_Q_TYPE_NCQ 0x08
|
|
|
|
u8 _r_b;
|
|
u8 retry_count;
|
|
u8 _r_c;
|
|
u8 flags;
|
|
#define STP_AFFIL_POLICY 0x20
|
|
#define SET_AFFIL_POLICY 0x10
|
|
#define RET_PARTIAL_SGLIST 0x02
|
|
|
|
u8 _r_d[3];
|
|
struct sg_el sg_element[3];
|
|
} __attribute__ ((packed));
|
|
|
|
struct initiate_smp_task {
|
|
u8 proto_conn_rate;
|
|
u8 _r_a[40];
|
|
struct sg_el smp_req;
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 _r_c[8];
|
|
struct sg_el smp_resp;
|
|
u8 _r_d[32];
|
|
} __attribute__ ((packed));
|
|
|
|
struct control_phy {
|
|
u8 phy_id;
|
|
u8 sub_func;
|
|
#define DISABLE_PHY 0x00
|
|
#define ENABLE_PHY 0x01
|
|
#define RELEASE_SPINUP_HOLD 0x02
|
|
#define ENABLE_PHY_NO_SAS_OOB 0x03
|
|
#define ENABLE_PHY_NO_SATA_OOB 0x04
|
|
#define PHY_NO_OP 0x05
|
|
#define EXECUTE_HARD_RESET 0x81
|
|
|
|
u8 func_mask;
|
|
u8 speed_mask;
|
|
u8 hot_plug_delay;
|
|
u8 port_type;
|
|
u8 flags;
|
|
#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
|
|
#define DISABLE_PHY_IF_OOB_FAILS 0x02
|
|
|
|
__le32 timeout_override;
|
|
u8 link_reset_retries;
|
|
u8 _r_a[47];
|
|
__le16 conn_handle;
|
|
u8 _r_b[56];
|
|
} __attribute__ ((packed));
|
|
|
|
struct control_ata_dev {
|
|
u8 proto_conn_rate;
|
|
__le32 _r_a;
|
|
struct host_to_dev_fis fis;
|
|
u8 _r_b[32];
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 ata_flags; /* 0 */
|
|
u8 _r_c[55];
|
|
} __attribute__ ((packed));
|
|
|
|
struct empty_scb {
|
|
u8 num_valid;
|
|
__le32 _r_a;
|
|
#define ASD_EDBS_PER_SCB 7
|
|
/* header+data+CRC+DMA suffix data */
|
|
#define ASD_EDB_SIZE (24+1024+4+16)
|
|
struct sg_el eb[ASD_EDBS_PER_SCB];
|
|
#define ELEMENT_NOT_VALID 0xC0
|
|
} __attribute__ ((packed));
|
|
|
|
struct initiate_link_adm {
|
|
u8 phy_id;
|
|
u8 sub_func;
|
|
#define GET_LINK_ERROR_COUNT 0x00
|
|
#define RESET_LINK_ERROR_COUNT 0x01
|
|
#define ENABLE_NOTIFY_SPINUP_INTS 0x02
|
|
|
|
u8 _r_a[57];
|
|
__le16 conn_handle;
|
|
u8 _r_b[56];
|
|
} __attribute__ ((packed));
|
|
|
|
struct copy_memory {
|
|
u8 _r_a;
|
|
__le16 xfer_len;
|
|
__le16 _r_b;
|
|
__le64 src_busaddr;
|
|
u8 src_ds; /* See definition of sg_el */
|
|
u8 _r_c[45];
|
|
__le16 conn_handle;
|
|
__le64 _r_d;
|
|
__le64 dest_busaddr;
|
|
u8 dest_ds; /* See definition of sg_el */
|
|
u8 _r_e[39];
|
|
} __attribute__ ((packed));
|
|
|
|
struct abort_task {
|
|
u8 proto_conn_rate;
|
|
__le32 _r_a;
|
|
struct ssp_frame_hdr ssp_frame;
|
|
struct ssp_task_iu ssp_task;
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
|
|
#define SUSPEND_DATA_TRANS 0x04
|
|
|
|
u8 _r_b;
|
|
u8 retry_count;
|
|
u8 _r_c[5];
|
|
__le16 index; /* Transaction context of task to be queried */
|
|
__le16 itnl_to;
|
|
u8 _r_d[44];
|
|
} __attribute__ ((packed));
|
|
|
|
struct clear_nexus {
|
|
u8 nexus;
|
|
#define NEXUS_ADAPTER 0x00
|
|
#define NEXUS_PORT 0x01
|
|
#define NEXUS_I_T 0x02
|
|
#define NEXUS_I_T_L 0x03
|
|
#define NEXUS_TAG 0x04
|
|
#define NEXUS_TRANS_CX 0x05
|
|
#define NEXUS_SATA_TAG 0x06
|
|
#define NEXUS_T_L 0x07
|
|
#define NEXUS_L 0x08
|
|
#define NEXUS_T_TAG 0x09
|
|
|
|
__le32 _r_a;
|
|
u8 flags;
|
|
#define SUSPEND_TX 0x80
|
|
#define RESUME_TX 0x40
|
|
#define SEND_Q 0x04
|
|
#define EXEC_Q 0x02
|
|
#define NOTINQ 0x01
|
|
|
|
u8 _r_b[3];
|
|
u8 conn_mask;
|
|
u8 _r_c[19];
|
|
struct ssp_task_iu ssp_task; /* LUN and TAG */
|
|
__le16 _r_d;
|
|
__le16 conn_handle;
|
|
__le64 _r_e;
|
|
__le16 index; /* Transaction context of task to be cleared */
|
|
__le16 context; /* Clear nexus context */
|
|
u8 _r_f[44];
|
|
} __attribute__ ((packed));
|
|
|
|
struct initiate_ssp_tmf {
|
|
u8 proto_conn_rate;
|
|
__le32 _r_a;
|
|
struct ssp_frame_hdr ssp_frame;
|
|
struct ssp_task_iu ssp_task;
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 flags; /* itnl override and suspend data tx */
|
|
#define OVERRIDE_ITNL_TIMER 8
|
|
|
|
u8 _r_b;
|
|
u8 retry_count;
|
|
u8 _r_c[5];
|
|
__le16 index; /* Transaction context of task to be queried */
|
|
__le16 itnl_to;
|
|
u8 _r_d[44];
|
|
} __attribute__ ((packed));
|
|
|
|
/* Transmits an arbitrary primitive on the link.
|
|
* Used for NOTIFY and BROADCAST.
|
|
*/
|
|
struct send_prim {
|
|
u8 phy_id;
|
|
u8 wait_transmit; /* :0,0 */
|
|
u8 xmit_flags;
|
|
#define XMTPSIZE_MASK 0xF0
|
|
#define XMTPSIZE_SINGLE 0x10
|
|
#define XMTPSIZE_REPEATED 0x20
|
|
#define XMTPSIZE_CONT 0x20
|
|
#define XMTPSIZE_TRIPLE 0x30
|
|
#define XMTPSIZE_REDUNDANT 0x60
|
|
#define XMTPSIZE_INF 0
|
|
|
|
#define XMTCONTEN 0x04
|
|
#define XMTPFRM 0x02 /* Transmit at the next frame boundary */
|
|
#define XMTPIMM 0x01 /* Transmit immediately */
|
|
|
|
__le16 _r_a;
|
|
u8 prim[4]; /* K, D0, D1, D2 */
|
|
u8 _r_b[50];
|
|
__le16 conn_handle;
|
|
u8 _r_c[56];
|
|
} __attribute__ ((packed));
|
|
|
|
/* This describes both SSP Target Get Data and SSP Target Get Data And
|
|
* Send Good Response SCBs. Used when the sequencer is operating in
|
|
* target mode...
|
|
*/
|
|
struct ssp_targ_get_data {
|
|
u8 proto_conn_rate;
|
|
__le32 total_xfer_len;
|
|
struct ssp_frame_hdr ssp_frame;
|
|
struct xfer_rdy_iu xfer_rdy;
|
|
u8 lun[LUN_SIZE];
|
|
__le64 _r_a;
|
|
__le16 sister_scb;
|
|
__le16 conn_handle;
|
|
u8 data_dir; /* 01b */
|
|
u8 _r_b;
|
|
u8 retry_count;
|
|
u8 _r_c[5];
|
|
struct sg_el sg_element[3];
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- The actual SCB struct ---------- */
|
|
|
|
struct scb {
|
|
struct scb_header header;
|
|
union {
|
|
struct initiate_ssp_task ssp_task;
|
|
struct initiate_ata_task ata_task;
|
|
struct initiate_smp_task smp_task;
|
|
struct control_phy control_phy;
|
|
struct control_ata_dev control_ata_dev;
|
|
struct empty_scb escb;
|
|
struct initiate_link_adm link_adm;
|
|
struct copy_memory cp_mem;
|
|
struct abort_task abort_task;
|
|
struct clear_nexus clear_nexus;
|
|
struct initiate_ssp_tmf ssp_tmf;
|
|
};
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- Done List ---------- */
|
|
/* The done list entry opcode field is defined below.
|
|
* The mnemonic encoding and meaning is as follows:
|
|
* TC - Task Complete, status was received and acknowledged
|
|
* TF - Task Failed, indicates an error prior to receiving acknowledgment
|
|
* for the command:
|
|
* - no conn,
|
|
* - NACK or R_ERR received in response to this command,
|
|
* - credit blocked or not available, or in the case of SMP request,
|
|
* - no SMP response was received.
|
|
* In these four cases it is known that the target didn't receive the
|
|
* command.
|
|
* TI - Task Interrupted, error after the command was acknowledged. It is
|
|
* known that the command was received by the target.
|
|
* TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
|
|
* (R_ERR) was received due to loss of signal, broken connection, loss of
|
|
* dword sync or other reason. The application client should send the
|
|
* appropriate task query.
|
|
* TA - Task Aborted, see TF.
|
|
* _RESP - The completion includes an empty buffer containing status.
|
|
* TO - Timeout.
|
|
*/
|
|
#define TC_NO_ERROR 0x00
|
|
#define TC_UNDERRUN 0x01
|
|
#define TC_OVERRUN 0x02
|
|
#define TF_OPEN_TO 0x03
|
|
#define TF_OPEN_REJECT 0x04
|
|
#define TI_BREAK 0x05
|
|
#define TI_PROTO_ERR 0x06
|
|
#define TC_SSP_RESP 0x07
|
|
#define TI_PHY_DOWN 0x08
|
|
#define TF_PHY_DOWN 0x09
|
|
#define TC_LINK_ADM_RESP 0x0a
|
|
#define TC_CSMI 0x0b
|
|
#define TC_ATA_RESP 0x0c
|
|
#define TU_PHY_DOWN 0x0d
|
|
#define TU_BREAK 0x0e
|
|
#define TI_SATA_TO 0x0f
|
|
#define TI_NAK 0x10
|
|
#define TC_CONTROL_PHY 0x11
|
|
#define TF_BREAK 0x12
|
|
#define TC_RESUME 0x13
|
|
#define TI_ACK_NAK_TO 0x14
|
|
#define TF_SMPRSP_TO 0x15
|
|
#define TF_SMP_XMIT_RCV_ERR 0x16
|
|
#define TC_PARTIAL_SG_LIST 0x17
|
|
#define TU_ACK_NAK_TO 0x18
|
|
#define TU_SATA_TO 0x19
|
|
#define TF_NAK_RECV 0x1a
|
|
#define TA_I_T_NEXUS_LOSS 0x1b
|
|
#define TC_ATA_R_ERR_RECV 0x1c
|
|
#define TF_TMF_NO_CTX 0x1d
|
|
#define TA_ON_REQ 0x1e
|
|
#define TF_TMF_NO_TAG 0x1f
|
|
#define TF_TMF_TAG_FREE 0x20
|
|
#define TF_TMF_TASK_DONE 0x21
|
|
#define TF_TMF_NO_CONN_HANDLE 0x22
|
|
#define TC_TASK_CLEARED 0x23
|
|
#define TI_SYNCS_RECV 0x24
|
|
#define TU_SYNCS_RECV 0x25
|
|
#define TF_IRTT_TO 0x26
|
|
#define TF_NO_SMP_CONN 0x27
|
|
#define TF_IU_SHORT 0x28
|
|
#define TF_DATA_OFFS_ERR 0x29
|
|
#define TF_INV_CONN_HANDLE 0x2a
|
|
#define TF_REQUESTED_N_PENDING 0x2b
|
|
|
|
/* 0xc1 - 0xc7: empty buffer received,
|
|
0xd1 - 0xd7: establish nexus empty buffer received
|
|
*/
|
|
/* This is the ESCB mask */
|
|
#define ESCB_RECVD 0xC0
|
|
|
|
|
|
/* This struct done_list_struct defines the done list entry.
|
|
* All fields are LE.
|
|
*/
|
|
struct done_list_struct {
|
|
__le16 index; /* aka transaction context */
|
|
u8 opcode;
|
|
u8 status_block[4];
|
|
u8 toggle; /* bit 0 */
|
|
#define DL_TOGGLE_MASK 0x01
|
|
} __attribute__ ((packed));
|
|
|
|
/* ---------- PHYS ---------- */
|
|
|
|
struct asd_phy {
|
|
struct asd_sas_phy sas_phy;
|
|
struct asd_phy_desc *phy_desc; /* hw profile */
|
|
|
|
struct sas_identify_frame *identify_frame;
|
|
struct asd_dma_tok *id_frm_tok;
|
|
|
|
u8 frame_rcvd[ASD_EDB_SIZE];
|
|
};
|
|
|
|
|
|
#define ASD_SCB_SIZE sizeof(struct scb)
|
|
#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
|
|
|
|
/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
|
|
* Default: 0x10 (it's a mask)
|
|
*/
|
|
#define ASD_NOTIFY_ENABLE_SPINUP 0x10
|
|
|
|
/* If enabled, set this to the interval between transmission
|
|
* of NOTIFY (ENABLE SPINUP). In units of 200 us.
|
|
*/
|
|
#define ASD_NOTIFY_TIMEOUT 2500
|
|
|
|
/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
|
|
* If 0, transmit immediately. In milliseconds.
|
|
*/
|
|
#define ASD_NOTIFY_DOWN_COUNT 0
|
|
|
|
/* Device present timer timeout constant, 10 ms. */
|
|
#define ASD_DEV_PRESENT_TIMEOUT 0x2710
|
|
|
|
#define ASD_SATA_INTERLOCK_TIMEOUT 0
|
|
|
|
/* How long to wait before shutting down an STP connection, unless
|
|
* an STP target sent frame(s). 50 usec.
|
|
* IGNORED by the sequencer (i.e. value 0 always).
|
|
*/
|
|
#define ASD_STP_SHUTDOWN_TIMEOUT 0x0
|
|
|
|
/* ATA soft reset timer timeout. 5 usec. */
|
|
#define ASD_SRST_ASSERT_TIMEOUT 0x05
|
|
|
|
/* 31 sec */
|
|
#define ASD_RCV_FIS_TIMEOUT 0x01D905C0
|
|
|
|
#define ASD_ONE_MILLISEC_TIMEOUT 0x03e8
|
|
|
|
/* COMINIT timer */
|
|
#define ASD_TEN_MILLISEC_TIMEOUT 0x2710
|
|
#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
|
|
|
|
/* 1 sec */
|
|
#define ASD_SMP_RCV_TIMEOUT 0x000F4240
|
|
|
|
#endif
|
|
|