You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
317 lines
9.1 KiB
317 lines
9.1 KiB
/*
|
|
* Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
|
|
*
|
|
* Author: Mark A. Greer
|
|
* mgreer@mvista.com
|
|
*
|
|
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/open_pic.h>
|
|
#include <asm/hawk.h>
|
|
|
|
/*
|
|
* The Falcon/Raven and HAWK has 4 sets of registers:
|
|
* 1) PPC Registers which define the mappings from PPC bus to PCI bus,
|
|
* etc.
|
|
* 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
|
|
* MPIC base address.
|
|
* 3) MPIC registers.
|
|
* 4) System Memory Controller (SMC) registers.
|
|
*/
|
|
|
|
/*
|
|
* Initialize the Motorola MCG Raven or HAWK host bridge.
|
|
*
|
|
* This means setting up the PPC bus to PCI memory and I/O space mappings,
|
|
* setting the PCI memory space address of the MPIC (mapped straight
|
|
* through), and ioremap'ing the mpic registers.
|
|
* This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
|
|
* addresses based on the PCI I/O address that is passed in.
|
|
* 'OpenPIC_Addr' will be set correctly by this routine.
|
|
*/
|
|
int __init
|
|
hawk_init(struct pci_controller *hose,
|
|
uint ppc_reg_base,
|
|
ulong processor_pci_mem_start,
|
|
ulong processor_pci_mem_end,
|
|
ulong processor_pci_io_start,
|
|
ulong processor_pci_io_end,
|
|
ulong processor_mpic_base)
|
|
{
|
|
uint addr, offset;
|
|
|
|
/*
|
|
* Some sanity checks...
|
|
*/
|
|
if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
|
|
((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
|
|
printk("hawk_init: %s\n",
|
|
"PPC to PCI mappings must start on 64 KB boundaries");
|
|
return -1;
|
|
}
|
|
|
|
if (((processor_pci_mem_end &0x0000ffff) != 0x0000ffff) ||
|
|
((processor_pci_io_end &0x0000ffff) != 0x0000ffff)) {
|
|
printk("hawk_init: PPC to PCI mappings %s\n",
|
|
"must end just before a 64 KB boundaries");
|
|
return -1;
|
|
}
|
|
|
|
if (((processor_pci_mem_end - processor_pci_mem_start) !=
|
|
(hose->mem_space.end - hose->mem_space.start)) ||
|
|
((processor_pci_io_end - processor_pci_io_start) !=
|
|
(hose->io_space.end - hose->io_space.start))) {
|
|
printk("hawk_init: %s\n",
|
|
"PPC and PCI memory or I/O space sizes don't match");
|
|
return -1;
|
|
}
|
|
|
|
if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
|
|
printk("hawk_init: %s\n",
|
|
"MPIC address must start on 256 MB boundary");
|
|
return -1;
|
|
}
|
|
|
|
if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
|
|
printk("hawk_init: %s\n",
|
|
"pci_dram_offset must be multiple of 64 KB");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Disable previous PPC->PCI mappings.
|
|
*/
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
|
|
|
|
/*
|
|
* Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
|
|
* space mappings. These are the mappings going from the processor to
|
|
* the PCI bus.
|
|
*
|
|
* Note: Don't need to 'AND' start/end addresses with 0xffff0000
|
|
* because sanity check above ensures that they are properly
|
|
* aligned.
|
|
*/
|
|
|
|
/* Set up PPC->PCI Mem mapping */
|
|
addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
|
|
offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
|
|
|
|
/* Set up PPC->MPIC mapping on the bridge */
|
|
addr = processor_mpic_base |
|
|
(((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
|
|
/* No write posting for this PCI Mem space */
|
|
offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
|
|
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
|
|
|
|
/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
|
|
addr = processor_pci_io_start | (processor_pci_io_end >> 16);
|
|
offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
|
|
out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
|
|
|
|
hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
|
|
(processor_pci_io_end - processor_pci_io_start + 1));
|
|
|
|
/*
|
|
* Set up the indirect method of accessing PCI config space.
|
|
* The PCI config addr/data pair based on start addr of PCI I/O space.
|
|
*/
|
|
setup_indirect_pci(hose,
|
|
processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
|
|
processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
|
|
|
|
/*
|
|
* Disable previous PCI->PPC mappings.
|
|
*/
|
|
|
|
/* XXXX Put in mappings from PCI bus to processor bus XXXX */
|
|
|
|
/*
|
|
* Disable MPIC response to PCI I/O space (BAR 0).
|
|
* Make MPIC respond to PCI Mem space at specified address.
|
|
* (BAR 1).
|
|
*/
|
|
early_write_config_dword(hose,
|
|
0,
|
|
PCI_DEVFN(0,0),
|
|
PCI_BASE_ADDRESS_0,
|
|
0x00000000 | 0x1);
|
|
|
|
early_write_config_dword(hose,
|
|
0,
|
|
PCI_DEVFN(0,0),
|
|
PCI_BASE_ADDRESS_1,
|
|
(processor_mpic_base -
|
|
processor_pci_mem_start +
|
|
hose->mem_space.start) | 0x0);
|
|
|
|
/* Map MPIC into vitual memory */
|
|
OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Find the amount of RAM present.
|
|
* This assumes that PPCBug has initialized the memory controller (SMC)
|
|
* on the Falcon/HAWK correctly (i.e., it does no sanity checking).
|
|
* It also assumes that the memory base registers are set to configure the
|
|
* memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
|
|
* however, RAM base registers can be skipped (e.g. A, B, C are set,
|
|
* D is skipped but E is set is okay).
|
|
*/
|
|
#define MB (1024*1024)
|
|
|
|
static uint reg_offset_table[] __initdata = {
|
|
HAWK_SMC_RAM_A_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_B_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_C_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_D_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_E_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_F_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_G_SIZE_REG_OFF,
|
|
HAWK_SMC_RAM_H_SIZE_REG_OFF
|
|
};
|
|
|
|
static uint falcon_size_table[] __initdata = {
|
|
0 * MB, /* 0 ==> 0 MB */
|
|
16 * MB, /* 1 ==> 16 MB */
|
|
32 * MB, /* 2 ==> 32 MB */
|
|
64 * MB, /* 3 ==> 64 MB */
|
|
128 * MB, /* 4 ==> 128 MB */
|
|
256 * MB, /* 5 ==> 256 MB */
|
|
1024 * MB, /* 6 ==> 1024 MB (1 GB) */
|
|
};
|
|
|
|
static uint hawk_size_table[] __initdata = {
|
|
0 * MB, /* 0 ==> 0 MB */
|
|
32 * MB, /* 1 ==> 32 MB */
|
|
64 * MB, /* 2 ==> 64 MB */
|
|
64 * MB, /* 3 ==> 64 MB */
|
|
128 * MB, /* 4 ==> 128 MB */
|
|
128 * MB, /* 5 ==> 128 MB */
|
|
128 * MB, /* 6 ==> 128 MB */
|
|
256 * MB, /* 7 ==> 256 MB */
|
|
256 * MB, /* 8 ==> 256 MB */
|
|
512 * MB, /* 9 ==> 512 MB */
|
|
};
|
|
|
|
/*
|
|
* *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
|
|
*
|
|
* Read the memory controller's registers to determine the amount of system
|
|
* memory. Assumes that the memory controller registers are already mapped
|
|
* into virtual memory--too early to use ioremap().
|
|
*/
|
|
unsigned long __init
|
|
hawk_get_mem_size(uint smc_base)
|
|
{
|
|
unsigned long total;
|
|
int i, size_table_entries, reg_limit;
|
|
uint vend_dev_id;
|
|
uint *size_table;
|
|
u_char val;
|
|
|
|
|
|
vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
|
|
|
|
if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
|
|
printk("hawk_get_mem_size: %s (0x%x)\n",
|
|
"Not a Motorola Memory Controller", vend_dev_id);
|
|
return 0;
|
|
}
|
|
|
|
vend_dev_id &= 0x0000ffff;
|
|
|
|
if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
|
|
size_table = falcon_size_table;
|
|
size_table_entries = sizeof(falcon_size_table) /
|
|
sizeof(falcon_size_table[0]);
|
|
|
|
reg_limit = FALCON_SMC_REG_COUNT;
|
|
}
|
|
else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
|
|
size_table = hawk_size_table;
|
|
size_table_entries = sizeof(hawk_size_table) /
|
|
sizeof(hawk_size_table[0]);
|
|
reg_limit = HAWK_SMC_REG_COUNT;
|
|
}
|
|
else {
|
|
printk("hawk_get_mem_size: %s (0x%x)\n",
|
|
"Not a Falcon or HAWK", vend_dev_id);
|
|
return 0;
|
|
}
|
|
|
|
total = 0;
|
|
|
|
/* Check every reg because PPCBug may skip some */
|
|
for (i=0; i<reg_limit; i++) {
|
|
val = in_8((u_char *)(smc_base + reg_offset_table[i]));
|
|
|
|
if (val & 0x80) { /* If enabled */
|
|
val &= 0x0f;
|
|
|
|
/* Don't go past end of size_table */
|
|
if (val < size_table_entries) {
|
|
total += size_table[val];
|
|
}
|
|
else { /* Register not set correctly */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return total;
|
|
}
|
|
|
|
int __init
|
|
hawk_mpic_init(unsigned int pci_mem_offset)
|
|
{
|
|
unsigned short devid;
|
|
unsigned int pci_membase;
|
|
|
|
/* Check the first PCI device to see if it is a Raven or Hawk. */
|
|
early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
|
|
|
|
switch (devid) {
|
|
case PCI_DEVICE_ID_MOTOROLA_RAVEN:
|
|
case PCI_DEVICE_ID_MOTOROLA_HAWK:
|
|
break;
|
|
default:
|
|
OpenPIC_Addr = NULL;
|
|
return 1;
|
|
}
|
|
|
|
/* Read the memory base register. */
|
|
early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
|
|
|
|
if (pci_membase == 0) {
|
|
OpenPIC_Addr = NULL;
|
|
return 1;
|
|
}
|
|
|
|
/* Map the MPIC registers to virtual memory. */
|
|
OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
|
|
|
|
return 0;
|
|
}
|
|
|