You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Subhash Jadavani 93c712f99d mmc: sd: UHS-I bus speed should be set last in UHS initialization ... mmc_sd_init_uhs_card function sets the driver type, current limit and bus speed mode on card as well as on host controller side. Currently bus speed mode is set by sending CMD6 to card and immediately setting the timing mode in host controller. But then before initiating tuning sequence, it also tries to set current limit by sending CMD6 to card which results in data timeout errors in controller if bus speed mode is SDR50/SDR104 mode. So basically bus speed mode should be set only after current limit is set in the card and immediately after setting the bus speed mode, tuning sequence should be initiated. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>		14 years ago
..
Kconfig	mmc: Aggressive clock gating framework	14 years ago
Makefile	mmc: add per device quirk placeholder	14 years ago
bus.c	mmc: sd: report correct speed and capacity of uhs cards	14 years ago
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	15 years ago
core.c	mmc: core: prevent aggressive clock gating racing with ios updates	14 years ago
core.h	mmc: core: add support for eMMC Dual Data Rate	14 years ago
debugfs.c	mmc: Aggressive clock gating framework	14 years ago
host.c	mmc: core: use non-reentrant workqueue for clock gating	14 years ago
host.h	mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}	14 years ago
mmc.c	mmc: core: Detect eMMC v4.5 ext_csd entries	14 years ago
mmc_ops.c	mmc: core: use defined R1_STATE_PRG macro for card status	14 years ago
mmc_ops.h	mmc: core: Allow setting CMD timeout for CMD6 (SWITCH).	14 years ago
quirks.c	mmc: quirks: Extends card quirks with MMC/SD quirks matching the CID.	14 years ago
sd.c	mmc: sd: UHS-I bus speed should be set last in UHS initialization	14 years ago
sd.h	mmc: sd: add support for driver type selection	14 years ago
sd_ops.c	mmc: core: Add mmc CMD+ACMD passthrough ioctl	14 years ago
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	15 years ago
sdio.c	mmc: sdio: reset card during power_restore	14 years ago
sdio_bus.c	mmc: fix runtime PM with -ENOSYS suspend case	14 years ago
sdio_bus.h	…
sdio_cis.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	15 years ago
sdio_cis.h	…
sdio_io.c	sdio: add new function for RAW (Read after Write) operation	15 years ago
sdio_irq.c	mmc: sdio: optimized SDIO IRQ handling for single irq	14 years ago
sdio_ops.c	mmc: initialize struct mmc_request at declaration time	14 years ago
sdio_ops.h	sdio: recognize io card without powercycle	15 years ago