You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
853 lines
26 KiB
853 lines
26 KiB
/*
|
|
* AMD 10Gb Ethernet driver
|
|
*
|
|
* This file is available to you under your choice of the following two
|
|
* licenses:
|
|
*
|
|
* License 1: GPLv2
|
|
*
|
|
* Copyright (c) 2016 Advanced Micro Devices, Inc.
|
|
*
|
|
* This file is free software; you may copy, redistribute and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* This file incorporates work covered by the following copyright and
|
|
* permission notice:
|
|
* The Synopsys DWC ETHER XGMAC Software Driver and documentation
|
|
* (hereinafter "Software") is an unsupported proprietary work of Synopsys,
|
|
* Inc. unless otherwise expressly agreed to in writing between Synopsys
|
|
* and you.
|
|
*
|
|
* The Software IS NOT an item of Licensed Software or Licensed Product
|
|
* under any End User Software License Agreement or Agreement for Licensed
|
|
* Product with Synopsys or any supplement thereto. Permission is hereby
|
|
* granted, free of charge, to any person obtaining a copy of this software
|
|
* annotated with this license and the Software, to deal in the Software
|
|
* without restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or sell copies
|
|
* of the Software, and to permit persons to whom the Software is furnished
|
|
* to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included
|
|
* in all copies or substantial portions of the Software.
|
|
*
|
|
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
|
|
* BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*
|
|
* License 2: Modified BSD
|
|
*
|
|
* Copyright (c) 2016 Advanced Micro Devices, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Advanced Micro Devices, Inc. nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* This file incorporates work covered by the following copyright and
|
|
* permission notice:
|
|
* The Synopsys DWC ETHER XGMAC Software Driver and documentation
|
|
* (hereinafter "Software") is an unsupported proprietary work of Synopsys,
|
|
* Inc. unless otherwise expressly agreed to in writing between Synopsys
|
|
* and you.
|
|
*
|
|
* The Software IS NOT an item of Licensed Software or Licensed Product
|
|
* under any End User Software License Agreement or Agreement for Licensed
|
|
* Product with Synopsys or any supplement thereto. Permission is hereby
|
|
* granted, free of charge, to any person obtaining a copy of this software
|
|
* annotated with this license and the Software, to deal in the Software
|
|
* without restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or sell copies
|
|
* of the Software, and to permit persons to whom the Software is furnished
|
|
* to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included
|
|
* in all copies or substantial portions of the Software.
|
|
*
|
|
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
|
|
* BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include "xgbe.h"
|
|
#include "xgbe-common.h"
|
|
|
|
#define XGBE_BLWC_PROPERTY "amd,serdes-blwc"
|
|
#define XGBE_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
|
|
#define XGBE_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
|
|
#define XGBE_TX_AMP_PROPERTY "amd,serdes-tx-amp"
|
|
#define XGBE_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config"
|
|
#define XGBE_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable"
|
|
|
|
/* Default SerDes settings */
|
|
#define XGBE_SPEED_1000_BLWC 1
|
|
#define XGBE_SPEED_1000_CDR 0x2
|
|
#define XGBE_SPEED_1000_PLL 0x0
|
|
#define XGBE_SPEED_1000_PQ 0xa
|
|
#define XGBE_SPEED_1000_RATE 0x3
|
|
#define XGBE_SPEED_1000_TXAMP 0xf
|
|
#define XGBE_SPEED_1000_WORD 0x1
|
|
#define XGBE_SPEED_1000_DFE_TAP_CONFIG 0x3
|
|
#define XGBE_SPEED_1000_DFE_TAP_ENABLE 0x0
|
|
|
|
#define XGBE_SPEED_2500_BLWC 1
|
|
#define XGBE_SPEED_2500_CDR 0x2
|
|
#define XGBE_SPEED_2500_PLL 0x0
|
|
#define XGBE_SPEED_2500_PQ 0xa
|
|
#define XGBE_SPEED_2500_RATE 0x1
|
|
#define XGBE_SPEED_2500_TXAMP 0xf
|
|
#define XGBE_SPEED_2500_WORD 0x1
|
|
#define XGBE_SPEED_2500_DFE_TAP_CONFIG 0x3
|
|
#define XGBE_SPEED_2500_DFE_TAP_ENABLE 0x0
|
|
|
|
#define XGBE_SPEED_10000_BLWC 0
|
|
#define XGBE_SPEED_10000_CDR 0x7
|
|
#define XGBE_SPEED_10000_PLL 0x1
|
|
#define XGBE_SPEED_10000_PQ 0x12
|
|
#define XGBE_SPEED_10000_RATE 0x0
|
|
#define XGBE_SPEED_10000_TXAMP 0xa
|
|
#define XGBE_SPEED_10000_WORD 0x7
|
|
#define XGBE_SPEED_10000_DFE_TAP_CONFIG 0x1
|
|
#define XGBE_SPEED_10000_DFE_TAP_ENABLE 0x7f
|
|
|
|
/* Rate-change complete wait/retry count */
|
|
#define XGBE_RATECHANGE_COUNT 500
|
|
|
|
static const u32 xgbe_phy_blwc[] = {
|
|
XGBE_SPEED_1000_BLWC,
|
|
XGBE_SPEED_2500_BLWC,
|
|
XGBE_SPEED_10000_BLWC,
|
|
};
|
|
|
|
static const u32 xgbe_phy_cdr_rate[] = {
|
|
XGBE_SPEED_1000_CDR,
|
|
XGBE_SPEED_2500_CDR,
|
|
XGBE_SPEED_10000_CDR,
|
|
};
|
|
|
|
static const u32 xgbe_phy_pq_skew[] = {
|
|
XGBE_SPEED_1000_PQ,
|
|
XGBE_SPEED_2500_PQ,
|
|
XGBE_SPEED_10000_PQ,
|
|
};
|
|
|
|
static const u32 xgbe_phy_tx_amp[] = {
|
|
XGBE_SPEED_1000_TXAMP,
|
|
XGBE_SPEED_2500_TXAMP,
|
|
XGBE_SPEED_10000_TXAMP,
|
|
};
|
|
|
|
static const u32 xgbe_phy_dfe_tap_cfg[] = {
|
|
XGBE_SPEED_1000_DFE_TAP_CONFIG,
|
|
XGBE_SPEED_2500_DFE_TAP_CONFIG,
|
|
XGBE_SPEED_10000_DFE_TAP_CONFIG,
|
|
};
|
|
|
|
static const u32 xgbe_phy_dfe_tap_ena[] = {
|
|
XGBE_SPEED_1000_DFE_TAP_ENABLE,
|
|
XGBE_SPEED_2500_DFE_TAP_ENABLE,
|
|
XGBE_SPEED_10000_DFE_TAP_ENABLE,
|
|
};
|
|
|
|
struct xgbe_phy_data {
|
|
/* 1000/10000 vs 2500/10000 indicator */
|
|
unsigned int speed_set;
|
|
|
|
/* SerDes UEFI configurable settings.
|
|
* Switching between modes/speeds requires new values for some
|
|
* SerDes settings. The values can be supplied as device
|
|
* properties in array format. The first array entry is for
|
|
* 1GbE, second for 2.5GbE and third for 10GbE
|
|
*/
|
|
u32 blwc[XGBE_SPEEDS];
|
|
u32 cdr_rate[XGBE_SPEEDS];
|
|
u32 pq_skew[XGBE_SPEEDS];
|
|
u32 tx_amp[XGBE_SPEEDS];
|
|
u32 dfe_tap_cfg[XGBE_SPEEDS];
|
|
u32 dfe_tap_ena[XGBE_SPEEDS];
|
|
};
|
|
|
|
static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
|
|
{
|
|
XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
|
|
}
|
|
|
|
static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
|
|
{
|
|
XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
|
|
}
|
|
|
|
static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct ethtool_link_ksettings *lks = &pdata->phy.lks;
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
enum xgbe_mode mode;
|
|
unsigned int ad_reg, lp_reg;
|
|
|
|
XGBE_SET_LP_ADV(lks, Autoneg);
|
|
XGBE_SET_LP_ADV(lks, Backplane);
|
|
|
|
/* Compare Advertisement and Link Partner register 1 */
|
|
ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
|
|
lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
|
|
if (lp_reg & 0x400)
|
|
XGBE_SET_LP_ADV(lks, Pause);
|
|
if (lp_reg & 0x800)
|
|
XGBE_SET_LP_ADV(lks, Asym_Pause);
|
|
|
|
if (pdata->phy.pause_autoneg) {
|
|
/* Set flow control based on auto-negotiation result */
|
|
pdata->phy.tx_pause = 0;
|
|
pdata->phy.rx_pause = 0;
|
|
|
|
if (ad_reg & lp_reg & 0x400) {
|
|
pdata->phy.tx_pause = 1;
|
|
pdata->phy.rx_pause = 1;
|
|
} else if (ad_reg & lp_reg & 0x800) {
|
|
if (ad_reg & 0x400)
|
|
pdata->phy.rx_pause = 1;
|
|
else if (lp_reg & 0x400)
|
|
pdata->phy.tx_pause = 1;
|
|
}
|
|
}
|
|
|
|
/* Compare Advertisement and Link Partner register 2 */
|
|
ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
|
|
lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
|
|
if (lp_reg & 0x80)
|
|
XGBE_SET_LP_ADV(lks, 10000baseKR_Full);
|
|
if (lp_reg & 0x20) {
|
|
if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
|
|
XGBE_SET_LP_ADV(lks, 2500baseX_Full);
|
|
else
|
|
XGBE_SET_LP_ADV(lks, 1000baseKX_Full);
|
|
}
|
|
|
|
ad_reg &= lp_reg;
|
|
if (ad_reg & 0x80) {
|
|
mode = XGBE_MODE_KR;
|
|
} else if (ad_reg & 0x20) {
|
|
if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
|
|
mode = XGBE_MODE_KX_2500;
|
|
else
|
|
mode = XGBE_MODE_KX_1000;
|
|
} else {
|
|
mode = XGBE_MODE_UNKNOWN;
|
|
}
|
|
|
|
/* Compare Advertisement and Link Partner register 3 */
|
|
ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
|
|
lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
|
|
if (lp_reg & 0xc000)
|
|
XGBE_SET_LP_ADV(lks, 10000baseR_FEC);
|
|
|
|
return mode;
|
|
}
|
|
|
|
static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata,
|
|
struct ethtool_link_ksettings *dlks)
|
|
{
|
|
struct ethtool_link_ksettings *slks = &pdata->phy.lks;
|
|
|
|
XGBE_LM_COPY(dlks, advertising, slks, advertising);
|
|
}
|
|
|
|
static int xgbe_phy_an_config(struct xgbe_prv_data *pdata)
|
|
{
|
|
/* Nothing uniquely required for an configuration */
|
|
return 0;
|
|
}
|
|
|
|
static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
return XGBE_AN_MODE_CL73;
|
|
}
|
|
|
|
static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
|
|
reg |= MDIO_CTRL1_LPOWER;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
|
|
usleep_range(75, 100);
|
|
|
|
reg &= ~MDIO_CTRL1_LPOWER;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
}
|
|
|
|
static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
|
|
{
|
|
/* Assert Rx and Tx ratechange */
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
|
|
}
|
|
|
|
static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
|
|
{
|
|
unsigned int wait;
|
|
u16 status;
|
|
|
|
/* Release Rx and Tx ratechange */
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
|
|
|
|
/* Wait for Rx and Tx ready */
|
|
wait = XGBE_RATECHANGE_COUNT;
|
|
while (wait--) {
|
|
usleep_range(50, 75);
|
|
|
|
status = XSIR0_IOREAD(pdata, SIR0_STATUS);
|
|
if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
|
|
XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
|
|
goto rx_reset;
|
|
}
|
|
|
|
netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
|
|
status);
|
|
|
|
rx_reset:
|
|
/* Perform Rx reset for the DFE changes */
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
|
|
}
|
|
|
|
static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
unsigned int reg;
|
|
|
|
/* Set PCS to KR/10G speed */
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
|
|
reg &= ~MDIO_PCS_CTRL2_TYPE;
|
|
reg |= MDIO_PCS_CTRL2_10GBR;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
|
|
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
reg &= ~MDIO_CTRL1_SPEEDSEL;
|
|
reg |= MDIO_CTRL1_SPEED10G;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
|
|
xgbe_phy_pcs_power_cycle(pdata);
|
|
|
|
/* Set SerDes to 10G speed */
|
|
xgbe_phy_start_ratechange(pdata);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
|
|
phy_data->cdr_rate[XGBE_SPEED_10000]);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
|
|
phy_data->tx_amp[XGBE_SPEED_10000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
|
|
phy_data->blwc[XGBE_SPEED_10000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
|
|
phy_data->pq_skew[XGBE_SPEED_10000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
|
|
phy_data->dfe_tap_cfg[XGBE_SPEED_10000]);
|
|
XRXTX_IOWRITE(pdata, RXTX_REG22,
|
|
phy_data->dfe_tap_ena[XGBE_SPEED_10000]);
|
|
|
|
xgbe_phy_complete_ratechange(pdata);
|
|
|
|
netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
|
|
}
|
|
|
|
static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
unsigned int reg;
|
|
|
|
/* Set PCS to KX/1G speed */
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
|
|
reg &= ~MDIO_PCS_CTRL2_TYPE;
|
|
reg |= MDIO_PCS_CTRL2_10GBX;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
|
|
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
reg &= ~MDIO_CTRL1_SPEEDSEL;
|
|
reg |= MDIO_CTRL1_SPEED1G;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
|
|
xgbe_phy_pcs_power_cycle(pdata);
|
|
|
|
/* Set SerDes to 2.5G speed */
|
|
xgbe_phy_start_ratechange(pdata);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
|
|
phy_data->cdr_rate[XGBE_SPEED_2500]);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
|
|
phy_data->tx_amp[XGBE_SPEED_2500]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
|
|
phy_data->blwc[XGBE_SPEED_2500]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
|
|
phy_data->pq_skew[XGBE_SPEED_2500]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
|
|
phy_data->dfe_tap_cfg[XGBE_SPEED_2500]);
|
|
XRXTX_IOWRITE(pdata, RXTX_REG22,
|
|
phy_data->dfe_tap_ena[XGBE_SPEED_2500]);
|
|
|
|
xgbe_phy_complete_ratechange(pdata);
|
|
|
|
netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
|
|
}
|
|
|
|
static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
unsigned int reg;
|
|
|
|
/* Set PCS to KX/1G speed */
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
|
|
reg &= ~MDIO_PCS_CTRL2_TYPE;
|
|
reg |= MDIO_PCS_CTRL2_10GBX;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
|
|
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
reg &= ~MDIO_CTRL1_SPEEDSEL;
|
|
reg |= MDIO_CTRL1_SPEED1G;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
|
|
xgbe_phy_pcs_power_cycle(pdata);
|
|
|
|
/* Set SerDes to 1G speed */
|
|
xgbe_phy_start_ratechange(pdata);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
|
|
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
|
|
phy_data->cdr_rate[XGBE_SPEED_1000]);
|
|
XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
|
|
phy_data->tx_amp[XGBE_SPEED_1000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
|
|
phy_data->blwc[XGBE_SPEED_1000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
|
|
phy_data->pq_skew[XGBE_SPEED_1000]);
|
|
XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
|
|
phy_data->dfe_tap_cfg[XGBE_SPEED_1000]);
|
|
XRXTX_IOWRITE(pdata, RXTX_REG22,
|
|
phy_data->dfe_tap_ena[XGBE_SPEED_1000]);
|
|
|
|
xgbe_phy_complete_ratechange(pdata);
|
|
|
|
netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
|
|
}
|
|
|
|
static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
enum xgbe_mode mode;
|
|
unsigned int reg;
|
|
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
|
|
reg &= MDIO_PCS_CTRL2_TYPE;
|
|
|
|
if (reg == MDIO_PCS_CTRL2_10GBR) {
|
|
mode = XGBE_MODE_KR;
|
|
} else {
|
|
if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
|
|
mode = XGBE_MODE_KX_2500;
|
|
else
|
|
mode = XGBE_MODE_KX_1000;
|
|
}
|
|
|
|
return mode;
|
|
}
|
|
|
|
static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
enum xgbe_mode mode;
|
|
|
|
/* If we are in KR switch to KX, and vice-versa */
|
|
if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) {
|
|
if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
|
|
mode = XGBE_MODE_KX_2500;
|
|
else
|
|
mode = XGBE_MODE_KX_1000;
|
|
} else {
|
|
mode = XGBE_MODE_KR;
|
|
}
|
|
|
|
return mode;
|
|
}
|
|
|
|
static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
|
|
int speed)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
|
|
switch (speed) {
|
|
case SPEED_1000:
|
|
return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000)
|
|
? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN;
|
|
case SPEED_2500:
|
|
return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
|
|
? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN;
|
|
case SPEED_10000:
|
|
return XGBE_MODE_KR;
|
|
default:
|
|
return XGBE_MODE_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case XGBE_MODE_KX_1000:
|
|
xgbe_phy_kx_1000_mode(pdata);
|
|
break;
|
|
case XGBE_MODE_KX_2500:
|
|
xgbe_phy_kx_2500_mode(pdata);
|
|
break;
|
|
case XGBE_MODE_KR:
|
|
xgbe_phy_kr_mode(pdata);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
|
|
enum xgbe_mode mode, bool advert)
|
|
{
|
|
if (pdata->phy.autoneg == AUTONEG_ENABLE) {
|
|
return advert;
|
|
} else {
|
|
enum xgbe_mode cur_mode;
|
|
|
|
cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
|
|
if (cur_mode == mode)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
|
|
{
|
|
struct ethtool_link_ksettings *lks = &pdata->phy.lks;
|
|
|
|
switch (mode) {
|
|
case XGBE_MODE_KX_1000:
|
|
return xgbe_phy_check_mode(pdata, mode,
|
|
XGBE_ADV(lks, 1000baseKX_Full));
|
|
case XGBE_MODE_KX_2500:
|
|
return xgbe_phy_check_mode(pdata, mode,
|
|
XGBE_ADV(lks, 2500baseX_Full));
|
|
case XGBE_MODE_KR:
|
|
return xgbe_phy_check_mode(pdata, mode,
|
|
XGBE_ADV(lks, 10000baseKR_Full));
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
|
|
{
|
|
struct xgbe_phy_data *phy_data = pdata->phy_data;
|
|
|
|
switch (speed) {
|
|
case SPEED_1000:
|
|
if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000)
|
|
return false;
|
|
return true;
|
|
case SPEED_2500:
|
|
if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000)
|
|
return false;
|
|
return true;
|
|
case SPEED_10000:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
|
|
{
|
|
unsigned int reg;
|
|
|
|
*an_restart = 0;
|
|
|
|
/* Link status is latched low, so read once to clear
|
|
* and then read again to get current state
|
|
*/
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
|
|
|
|
return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
|
|
}
|
|
|
|
static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
|
|
{
|
|
/* Nothing uniquely required for stop */
|
|
}
|
|
|
|
static int xgbe_phy_start(struct xgbe_prv_data *pdata)
|
|
{
|
|
/* Nothing uniquely required for start */
|
|
return 0;
|
|
}
|
|
|
|
static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
|
|
{
|
|
unsigned int reg, count;
|
|
|
|
/* Perform a software reset of the PCS */
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
reg |= MDIO_CTRL1_RESET;
|
|
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
|
|
|
|
count = 50;
|
|
do {
|
|
msleep(20);
|
|
reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
|
|
} while ((reg & MDIO_CTRL1_RESET) && --count);
|
|
|
|
if (reg & MDIO_CTRL1_RESET)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
|
|
{
|
|
/* Nothing uniquely required for exit */
|
|
}
|
|
|
|
static int xgbe_phy_init(struct xgbe_prv_data *pdata)
|
|
{
|
|
struct ethtool_link_ksettings *lks = &pdata->phy.lks;
|
|
struct xgbe_phy_data *phy_data;
|
|
int ret;
|
|
|
|
phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
|
|
if (!phy_data)
|
|
return -ENOMEM;
|
|
|
|
/* Retrieve the PHY speedset */
|
|
ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY,
|
|
&phy_data->speed_set);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_SPEEDSET_PROPERTY);
|
|
return ret;
|
|
}
|
|
|
|
switch (phy_data->speed_set) {
|
|
case XGBE_SPEEDSET_1000_10000:
|
|
case XGBE_SPEEDSET_2500_10000:
|
|
break;
|
|
default:
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_SPEEDSET_PROPERTY);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Retrieve the PHY configuration properties */
|
|
if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_BLWC_PROPERTY,
|
|
phy_data->blwc,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_BLWC_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->blwc, xgbe_phy_blwc,
|
|
sizeof(phy_data->blwc));
|
|
}
|
|
|
|
if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_CDR_RATE_PROPERTY,
|
|
phy_data->cdr_rate,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_CDR_RATE_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate,
|
|
sizeof(phy_data->cdr_rate));
|
|
}
|
|
|
|
if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_PQ_SKEW_PROPERTY,
|
|
phy_data->pq_skew,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_PQ_SKEW_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->pq_skew, xgbe_phy_pq_skew,
|
|
sizeof(phy_data->pq_skew));
|
|
}
|
|
|
|
if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_TX_AMP_PROPERTY,
|
|
phy_data->tx_amp,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_TX_AMP_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->tx_amp, xgbe_phy_tx_amp,
|
|
sizeof(phy_data->tx_amp));
|
|
}
|
|
|
|
if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_DFE_CFG_PROPERTY,
|
|
phy_data->dfe_tap_cfg,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_DFE_CFG_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg,
|
|
sizeof(phy_data->dfe_tap_cfg));
|
|
}
|
|
|
|
if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) {
|
|
ret = device_property_read_u32_array(pdata->phy_dev,
|
|
XGBE_DFE_ENA_PROPERTY,
|
|
phy_data->dfe_tap_ena,
|
|
XGBE_SPEEDS);
|
|
if (ret) {
|
|
dev_err(pdata->dev, "invalid %s property\n",
|
|
XGBE_DFE_ENA_PROPERTY);
|
|
return ret;
|
|
}
|
|
} else {
|
|
memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena,
|
|
sizeof(phy_data->dfe_tap_ena));
|
|
}
|
|
|
|
/* Initialize supported features */
|
|
XGBE_ZERO_SUP(lks);
|
|
XGBE_SET_SUP(lks, Autoneg);
|
|
XGBE_SET_SUP(lks, Pause);
|
|
XGBE_SET_SUP(lks, Asym_Pause);
|
|
XGBE_SET_SUP(lks, Backplane);
|
|
XGBE_SET_SUP(lks, 10000baseKR_Full);
|
|
switch (phy_data->speed_set) {
|
|
case XGBE_SPEEDSET_1000_10000:
|
|
XGBE_SET_SUP(lks, 1000baseKX_Full);
|
|
break;
|
|
case XGBE_SPEEDSET_2500_10000:
|
|
XGBE_SET_SUP(lks, 2500baseX_Full);
|
|
break;
|
|
}
|
|
|
|
if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
|
|
XGBE_SET_SUP(lks, 10000baseR_FEC);
|
|
|
|
pdata->phy_data = phy_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if)
|
|
{
|
|
struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
|
|
|
|
phy_impl->init = xgbe_phy_init;
|
|
phy_impl->exit = xgbe_phy_exit;
|
|
|
|
phy_impl->reset = xgbe_phy_reset;
|
|
phy_impl->start = xgbe_phy_start;
|
|
phy_impl->stop = xgbe_phy_stop;
|
|
|
|
phy_impl->link_status = xgbe_phy_link_status;
|
|
|
|
phy_impl->valid_speed = xgbe_phy_valid_speed;
|
|
|
|
phy_impl->use_mode = xgbe_phy_use_mode;
|
|
phy_impl->set_mode = xgbe_phy_set_mode;
|
|
phy_impl->get_mode = xgbe_phy_get_mode;
|
|
phy_impl->switch_mode = xgbe_phy_switch_mode;
|
|
phy_impl->cur_mode = xgbe_phy_cur_mode;
|
|
|
|
phy_impl->an_mode = xgbe_phy_an_mode;
|
|
|
|
phy_impl->an_config = xgbe_phy_an_config;
|
|
|
|
phy_impl->an_advertising = xgbe_phy_an_advertising;
|
|
|
|
phy_impl->an_outcome = xgbe_phy_an_outcome;
|
|
|
|
phy_impl->kr_training_pre = xgbe_phy_kr_training_pre;
|
|
phy_impl->kr_training_post = xgbe_phy_kr_training_post;
|
|
}
|
|
|