You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
kernel_samsung_sm7125/arch/arm64/boot/dts/samsung/gta4xlve/atoll-sec-gta4xlvewifi-r00....

363 lines
6.8 KiB

/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "atoll-sec-gta4xlve-common.dtsi"
#include "atoll-sec-gta4xlve-pinctrl-r00.dtsi"
#include "atoll-sec-gta4xlvewifi-pm-common.dtsi"
#include "atoll-sec-gta4xlve-display-r00.dtsi"
#include "atoll-sec-gta4xlve-input-common.dtsi"
#include "../drivers/atoll-sec-gta4xlve-audio-common.dtsi"
#include "../drivers/atoll-sec-gta4xlve-battery-common.dtsi"
#include "../drivers/atoll-sec-gta4xlve-usb-r00.dtsi"
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "atoll-sec-gta4xlve-camera-sensor-common.dtsi"
&soc {
//Sensor Vdd
rpmh-regulator-ldoc8 {
compatible = "qcom,rpmh-vrm-regulator";
mboxes = <&apps_rsc 0>;
qcom,resource-name = "ldoc8";
qcom,regulator-type = "pmic5-ldo";
qcom,supported-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
qcom,mode-threshold-currents = <0 1>;
L8C:
pm6150l_l8: regulator-pm6150l-l8 {
regulator-name = "pm6150l_l8";
qcom,set = <RPMH_REGULATOR_SET_ALL>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
regulator-always-on;
qcom,init-mode =
<RPMH_REGULATOR_MODE_LPM>;
};
};
rpmh-regulator-ldoc5 {
compatible = "qcom,rpmh-vrm-regulator";
mboxes = <&apps_rsc 0>;
qcom,resource-name = "ldoc5";
qcom,regulator-type = "pmic5-ldo";
qcom,supported-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
qcom,mode-threshold-currents = <0 1>;
L5C: pm6150l_l5: regulator-pm6150l-l5 {
regulator-name = "pm6150l_l5";
qcom,set = <RPMH_REGULATOR_SET_ALL>;
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3000000>;
qcom,init-voltage = <3000000>;
regulator-always-on;
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
};
};
i2c_17: i2c@17 { /* SW I2C */
status = "ok";
cell-index = <17>;
compatible = "i2c-gpio";
gpios = <&tlmm 51 0 /* sda */
&tlmm 52 0 /* scl */
>;
#i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&grip_i2c_active>;
isg6320-i2c@28 {
compatible = "isg6320";
reg = <0x28>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&grip_int_active>;
interrupt-parent = <&tlmm>;
interrupts = <0 0>;
isg6320,irq-gpio = <&tlmm 0 0>;
isg6320,multi_use = <1>;
isg6320,hallic_detect = <0>;
isg6320,hallic_cert_detect = <0>;
isg6320,ldo-en = <&tlmm 1 0>;
isg6320,reg_num = <113>;
isg6320,set_reg = /bits/ 8 <
0x31 0x00
0x17 0x51
0x18 0x02
0x19 0x00
0x1A 0x29
0x1B 0x4A
0x1C 0x4F
0x1D 0x21
0x1E 0x27
0x1F 0x0D
0x20 0x21
0x21 0x21
0x22 0x36
0x23 0x4A
0x24 0x0D
0x25 0x36
0x26 0x4A
0x27 0x0D
0x28 0x21
0x2B 0x2F
0x2F 0x77
0x38 0x31
0x60 0x05
0x61 0x07
0x62 0x78
0x91 0x78
0x65 0x32
0x67 0x46
0x68 0x2A
0x69 0x40
0x6A 0x00
0x6C 0x80
0x6D 0x95
0x6E 0x44
0x6F 0x08
0x70 0x60
0x71 0xC0
0x72 0x60
0x73 0x00
0x74 0xED
0x75 0xF6
0x76 0xED
0x77 0xF0
0x78 0x8A
0x79 0xF0
0x7C 0x12
0x7D 0x19
0x7E 0x6D
0x80 0x37
0x81 0x4E
0x89 0x01
0x8A 0x69
0x8B 0x7D
0x8C 0x7D
0x94 0x05
0x95 0x08
0x96 0x78
0xC5 0x78
0x99 0x32
0x9B 0x46
0x9C 0x2A
0x9D 0x40
0x9E 0x00
0xA0 0x80
0xA1 0x95
0xA2 0x44
0xA3 0x08
0xA4 0x60
0xA5 0xD0
0xA6 0x60
0xA7 0x00
0xA8 0xED
0xA9 0xF6
0xAA 0xED
0xAB 0xF0
0xAC 0x8A
0xAD 0xF0
0xB0 0x12
0xB1 0x19
0xB2 0x6D
0xB4 0x37
0xB5 0x4E
0xBD 0x01
0xBE 0x69
0xBF 0x7D
0xC0 0x7D
0x51 0x0A
0x52 0x10
0x55 0x10
0x56 0x20
0x59 0x18
0x5A 0x05
0xD1 0x04
0xD2 0x10
0xD5 0x10
0xD6 0x20
0xD9 0x18
0xDA 0x05
0x37 0x33
0x90 0x13
0xC4 0x13
0x05 0xB8
0x06 0x80
0x07 0x0D
0x08 0x01
0x09 0x4C
0x0F 0xAB
0x11 0x06
0x12 0x08
0x14 0x33
0x15 0x13
0x16 0x13
0x2C 0x03
>;
};
};
i2c_19: i2c@19 { /* SW I2C */
status = "ok";
cell-index = <17>;
compatible = "i2c-gpio";
gpios = <&tlmm 88 0 /* sda */
&tlmm 89 0 /* scl */
>;
#i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_grip_i2c_active>;
isg6320_wifi-i2c@28 {
compatible = "isg6320_wifi";
reg = <0x28>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wifi_grip_int_active>;
interrupt-parent = <&tlmm>;
interrupts = <3 0>;
isg6320_wifi,irq-gpio = <&tlmm 3 0>;
isg6320_wifi,multi_use = <0>;
isg6320_wifi,hallic_detect = <0>;
isg6320_wifi,hallic_cert_detect = <0>;
isg6320,ldo-en = <&tlmm 1 0>;
isg6320_wifi,reg_num = <113>;
isg6320_wifi,set_reg = /bits/ 8 <
0x31 0x00
0x17 0x48
0x18 0x48
0x19 0x00
0x1A 0x24
0x1B 0x41
0x1C 0x46
0x1D 0x1C
0x1E 0x22
0x1F 0x0A
0x20 0x1C
0x21 0x1C
0x22 0x2F
0x23 0x41
0x24 0x0A
0x25 0x2F
0x26 0x41
0x27 0x0A
0x28 0x1C
0x2B 0x2C
0x2F 0x71
0x38 0x31
0x60 0x05
0x61 0xCE
0x62 0x48
0x91 0x48
0x65 0x32
0x67 0x46
0x68 0x2A
0x69 0x40
0x6A 0x00
0x6C 0x80
0x6D 0x42
0x6E 0x44
0x6F 0x08
0x70 0x60
0x71 0xD0
0x72 0x60
0x73 0x00
0x74 0xED
0x75 0xF6
0x76 0xED
0x77 0xF0
0x78 0x8A
0x79 0xF0
0x7C 0x12
0x7D 0x19
0x7E 0x6D
0x80 0x37
0x81 0x4E
0x89 0x01
0x8A 0x69
0x8B 0x7D
0x8C 0x7D
0x94 0x05
0x95 0xCE
0x96 0x48
0xC5 0x48
0x99 0x32
0x9B 0x46
0x9C 0x2A
0x9D 0x40
0x9E 0x00
0xA0 0x80
0xA1 0x42
0xA2 0x44
0xA3 0x08
0xA4 0x60
0xA5 0xD0
0xA6 0x60
0xA7 0x00
0xA8 0xED
0xA9 0xF6
0xAA 0xED
0xAB 0xF0
0xAC 0x8A
0xAD 0xF0
0xB0 0x12
0xB1 0x19
0xB2 0x6D
0xB4 0x37
0xB5 0x4E
0xBD 0x01
0xBE 0x69
0xBF 0x7D
0xC0 0x7D
0x51 0x04
0x52 0x10
0x55 0x10
0x56 0x20
0x59 0x18
0x5A 0x05
0xD1 0x04
0xD2 0x10
0xD5 0x10
0xD6 0x20
0xD9 0x18
0xDA 0x05
0x37 0x33
0x90 0x13
0xC4 0x13
0x05 0xB8
0x06 0x80
0x07 0x0D
0x08 0x01
0x09 0x4C
0x0F 0xAB
0x11 0x06
0x12 0x08
0x14 0x33
0x15 0x13
0x16 0x13
0x2C 0x03
>;
};
};
};