You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
42 lines
2.0 KiB
42 lines
2.0 KiB
* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores
|
|
|
|
The OpenPIC specification does not specify which interrupt source has to
|
|
become which interrupt number. This is up to the software implementation
|
|
of the interrupt controller. The only requirement is that every
|
|
interrupt source has to have an unique interrupt number / vector number.
|
|
To accomplish this the current implementation assigns the number zero to
|
|
the first source, the number one to the second source and so on until
|
|
all interrupt sources have their unique number.
|
|
Usually the assigned vector number equals the interrupt number mentioned
|
|
in the documentation for a given core / CPU. This is however not true
|
|
for the e500 cores (MPC85XX CPUs) where the documentation distinguishes
|
|
between internal and external interrupt sources and starts counting at
|
|
zero for both of them.
|
|
|
|
So what to write for external interrupt source X or internal interrupt
|
|
source Y into the device tree? Here is an example:
|
|
|
|
The memory map for the interrupt controller in the MPC8544[0] shows,
|
|
that the first interrupt source starts at 0x5_0000 (PIC Register Address
|
|
Map-Interrupt Source Configuration Registers). This source becomes the
|
|
number zero therefore:
|
|
External interrupt 0 = interrupt number 0
|
|
External interrupt 1 = interrupt number 1
|
|
External interrupt 2 = interrupt number 2
|
|
...
|
|
Every interrupt number allocates 0x20 bytes register space. So to get
|
|
its number it is sufficient to shift the lower 16bits to right by five.
|
|
So for the external interrupt 10 we have:
|
|
0x0140 >> 5 = 10
|
|
|
|
After the external sources, the internal sources follow. The in core I2C
|
|
controller on the MPC8544 for instance has the internal source number
|
|
27. Oo obtain its interrupt number we take the lower 16bits of its memory
|
|
address (0x5_0560) and shift it right:
|
|
0x0560 >> 5 = 43
|
|
|
|
Therefore the I2C device node for the MPC8544 CPU has to have the
|
|
interrupt number 43 specified in the device tree.
|
|
|
|
[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual
|
|
MPC8544ERM Rev. 1 10/2007
|
|
|