You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2686 lines
75 KiB
2686 lines
75 KiB
/*
|
|
* Driver for the Conexant CX23885 PCIe bridge
|
|
*
|
|
* Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "cx23885.h"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/file.h>
|
|
#include <linux/suspend.h>
|
|
|
|
#include <media/v4l2-common.h>
|
|
|
|
#include "dvb_ca_en50221.h"
|
|
#include "s5h1409.h"
|
|
#include "s5h1411.h"
|
|
#include "mt2131.h"
|
|
#include "tda8290.h"
|
|
#include "tda18271.h"
|
|
#include "lgdt330x.h"
|
|
#include "xc4000.h"
|
|
#include "xc5000.h"
|
|
#include "max2165.h"
|
|
#include "tda10048.h"
|
|
#include "tuner-xc2028.h"
|
|
#include "tuner-simple.h"
|
|
#include "dib7000p.h"
|
|
#include "dib0070.h"
|
|
#include "dibx000_common.h"
|
|
#include "zl10353.h"
|
|
#include "stv0900.h"
|
|
#include "stv0900_reg.h"
|
|
#include "stv6110.h"
|
|
#include "lnbh24.h"
|
|
#include "cx24116.h"
|
|
#include "cx24117.h"
|
|
#include "cimax2.h"
|
|
#include "lgs8gxx.h"
|
|
#include "netup-eeprom.h"
|
|
#include "netup-init.h"
|
|
#include "lgdt3305.h"
|
|
#include "atbm8830.h"
|
|
#include "ts2020.h"
|
|
#include "ds3000.h"
|
|
#include "cx23885-f300.h"
|
|
#include "altera-ci.h"
|
|
#include "stv0367.h"
|
|
#include "drxk.h"
|
|
#include "mt2063.h"
|
|
#include "stv090x.h"
|
|
#include "stb6100.h"
|
|
#include "stb6100_cfg.h"
|
|
#include "tda10071.h"
|
|
#include "a8293.h"
|
|
#include "mb86a20s.h"
|
|
#include "si2165.h"
|
|
#include "si2168.h"
|
|
#include "si2157.h"
|
|
#include "sp2.h"
|
|
#include "m88ds3103.h"
|
|
#include "m88rs6000t.h"
|
|
#include "lgdt3306a.h"
|
|
|
|
static unsigned int debug;
|
|
|
|
#define dprintk(level, fmt, arg...)\
|
|
do { if (debug >= level)\
|
|
printk(KERN_DEBUG pr_fmt("%s dvb: " fmt), \
|
|
__func__, ##arg); \
|
|
} while (0)
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static unsigned int alt_tuner;
|
|
module_param(alt_tuner, int, 0644);
|
|
MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int queue_setup(struct vb2_queue *q,
|
|
unsigned int *num_buffers, unsigned int *num_planes,
|
|
unsigned int sizes[], struct device *alloc_devs[])
|
|
{
|
|
struct cx23885_tsport *port = q->drv_priv;
|
|
|
|
port->ts_packet_size = 188 * 4;
|
|
port->ts_packet_count = 32;
|
|
*num_planes = 1;
|
|
sizes[0] = port->ts_packet_size * port->ts_packet_count;
|
|
*num_buffers = 32;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int buffer_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
|
|
struct cx23885_buffer *buf =
|
|
container_of(vbuf, struct cx23885_buffer, vb);
|
|
|
|
return cx23885_buf_prepare(buf, port);
|
|
}
|
|
|
|
static void buffer_finish(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
struct cx23885_buffer *buf = container_of(vbuf,
|
|
struct cx23885_buffer, vb);
|
|
|
|
cx23885_free_buffer(dev, buf);
|
|
}
|
|
|
|
static void buffer_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
|
|
struct cx23885_buffer *buf = container_of(vbuf,
|
|
struct cx23885_buffer, vb);
|
|
|
|
cx23885_buf_queue(port, buf);
|
|
}
|
|
|
|
static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open)
|
|
{
|
|
struct vb2_dvb_frontends *f;
|
|
struct vb2_dvb_frontend *fe;
|
|
|
|
f = &port->frontends;
|
|
|
|
if (f->gate <= 1) /* undefined or fe0 */
|
|
fe = vb2_dvb_get_frontend(f, 1);
|
|
else
|
|
fe = vb2_dvb_get_frontend(f, f->gate);
|
|
|
|
if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
|
|
fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
|
|
}
|
|
|
|
static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
|
|
{
|
|
struct cx23885_tsport *port = q->drv_priv;
|
|
struct cx23885_dmaqueue *dmaq = &port->mpegq;
|
|
struct cx23885_buffer *buf = list_entry(dmaq->active.next,
|
|
struct cx23885_buffer, queue);
|
|
|
|
cx23885_start_dma(port, dmaq, buf);
|
|
return 0;
|
|
}
|
|
|
|
static void cx23885_stop_streaming(struct vb2_queue *q)
|
|
{
|
|
struct cx23885_tsport *port = q->drv_priv;
|
|
|
|
cx23885_cancel_buffers(port);
|
|
}
|
|
|
|
static const struct vb2_ops dvb_qops = {
|
|
.queue_setup = queue_setup,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_finish = buffer_finish,
|
|
.buf_queue = buffer_queue,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
.start_streaming = cx23885_start_streaming,
|
|
.stop_streaming = cx23885_stop_streaming,
|
|
};
|
|
|
|
static struct s5h1409_config hauppauge_generic_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_ON,
|
|
.qam_if = 44000,
|
|
.inversion = S5H1409_INVERSION_OFF,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct tda10048_config hauppauge_hvr1200_config = {
|
|
.demod_address = 0x10 >> 1,
|
|
.output_mode = TDA10048_SERIAL_OUTPUT,
|
|
.fwbulkwritelen = TDA10048_BULKWRITE_200,
|
|
.inversion = TDA10048_INVERSION_ON,
|
|
.dtv6_if_freq_khz = TDA10048_IF_3300,
|
|
.dtv7_if_freq_khz = TDA10048_IF_3800,
|
|
.dtv8_if_freq_khz = TDA10048_IF_4300,
|
|
.clk_freq_khz = TDA10048_CLK_16000,
|
|
};
|
|
|
|
static struct tda10048_config hauppauge_hvr1210_config = {
|
|
.demod_address = 0x10 >> 1,
|
|
.output_mode = TDA10048_SERIAL_OUTPUT,
|
|
.fwbulkwritelen = TDA10048_BULKWRITE_200,
|
|
.inversion = TDA10048_INVERSION_ON,
|
|
.dtv6_if_freq_khz = TDA10048_IF_3300,
|
|
.dtv7_if_freq_khz = TDA10048_IF_3500,
|
|
.dtv8_if_freq_khz = TDA10048_IF_4000,
|
|
.clk_freq_khz = TDA10048_CLK_16000,
|
|
};
|
|
|
|
static struct s5h1409_config hauppauge_ezqam_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_OFF,
|
|
.qam_if = 4000,
|
|
.inversion = S5H1409_INVERSION_ON,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct s5h1409_config hauppauge_hvr1800lp_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_OFF,
|
|
.qam_if = 44000,
|
|
.inversion = S5H1409_INVERSION_OFF,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct s5h1409_config hauppauge_hvr1500_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_OFF,
|
|
.inversion = S5H1409_INVERSION_OFF,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct mt2131_config hauppauge_generic_tunerconfig = {
|
|
0x61
|
|
};
|
|
|
|
static struct lgdt330x_config fusionhdtv_5_express = {
|
|
.demod_address = 0x0e,
|
|
.demod_chip = LGDT3303,
|
|
.serial_mpeg = 0x40,
|
|
};
|
|
|
|
static struct s5h1409_config hauppauge_hvr1500q_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_ON,
|
|
.qam_if = 44000,
|
|
.inversion = S5H1409_INVERSION_OFF,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct s5h1409_config dvico_s5h1409_config = {
|
|
.demod_address = 0x32 >> 1,
|
|
.output_mode = S5H1409_SERIAL_OUTPUT,
|
|
.gpio = S5H1409_GPIO_ON,
|
|
.qam_if = 44000,
|
|
.inversion = S5H1409_INVERSION_OFF,
|
|
.status_mode = S5H1409_DEMODLOCKING,
|
|
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct s5h1411_config dvico_s5h1411_config = {
|
|
.output_mode = S5H1411_SERIAL_OUTPUT,
|
|
.gpio = S5H1411_GPIO_ON,
|
|
.qam_if = S5H1411_IF_44000,
|
|
.vsb_if = S5H1411_IF_44000,
|
|
.inversion = S5H1411_INVERSION_OFF,
|
|
.status_mode = S5H1411_DEMODLOCKING,
|
|
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct s5h1411_config hcw_s5h1411_config = {
|
|
.output_mode = S5H1411_SERIAL_OUTPUT,
|
|
.gpio = S5H1411_GPIO_OFF,
|
|
.vsb_if = S5H1411_IF_44000,
|
|
.qam_if = S5H1411_IF_4000,
|
|
.inversion = S5H1411_INVERSION_ON,
|
|
.status_mode = S5H1411_DEMODLOCKING,
|
|
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 5380,
|
|
};
|
|
|
|
static struct xc5000_config dvico_xc5000_tunerconfig = {
|
|
.i2c_address = 0x64,
|
|
.if_khz = 5380,
|
|
};
|
|
|
|
static struct tda829x_config tda829x_no_probe = {
|
|
.probe_tuner = TDA829X_DONT_PROBE,
|
|
};
|
|
|
|
static struct tda18271_std_map hauppauge_tda18271_std_map = {
|
|
.atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
|
|
.if_lvl = 6, .rfagc_top = 0x37 },
|
|
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
|
|
.if_lvl = 6, .rfagc_top = 0x37 },
|
|
};
|
|
|
|
static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
|
|
.dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
.dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
.dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
};
|
|
|
|
static struct tda18271_config hauppauge_tda18271_config = {
|
|
.std_map = &hauppauge_tda18271_std_map,
|
|
.gate = TDA18271_GATE_ANALOG,
|
|
.output_opt = TDA18271_OUTPUT_LT_OFF,
|
|
};
|
|
|
|
static struct tda18271_config hauppauge_hvr1200_tuner_config = {
|
|
.std_map = &hauppauge_hvr1200_tda18271_std_map,
|
|
.gate = TDA18271_GATE_ANALOG,
|
|
.output_opt = TDA18271_OUTPUT_LT_OFF,
|
|
};
|
|
|
|
static struct tda18271_config hauppauge_hvr1210_tuner_config = {
|
|
.gate = TDA18271_GATE_DIGITAL,
|
|
.output_opt = TDA18271_OUTPUT_LT_OFF,
|
|
};
|
|
|
|
static struct tda18271_config hauppauge_hvr4400_tuner_config = {
|
|
.gate = TDA18271_GATE_DIGITAL,
|
|
.output_opt = TDA18271_OUTPUT_LT_OFF,
|
|
};
|
|
|
|
static struct tda18271_std_map hauppauge_hvr127x_std_map = {
|
|
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
|
|
.if_lvl = 1, .rfagc_top = 0x58 },
|
|
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
|
|
.if_lvl = 1, .rfagc_top = 0x58 },
|
|
};
|
|
|
|
static struct tda18271_config hauppauge_hvr127x_config = {
|
|
.std_map = &hauppauge_hvr127x_std_map,
|
|
.output_opt = TDA18271_OUTPUT_LT_OFF,
|
|
};
|
|
|
|
static struct lgdt3305_config hauppauge_lgdt3305_config = {
|
|
.i2c_addr = 0x0e,
|
|
.mpeg_mode = LGDT3305_MPEG_SERIAL,
|
|
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
|
|
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
|
|
.deny_i2c_rptr = 1,
|
|
.spectral_inversion = 1,
|
|
.qam_if_khz = 4000,
|
|
.vsb_if_khz = 3250,
|
|
};
|
|
|
|
static struct dibx000_agc_config xc3028_agc_config = {
|
|
BAND_VHF | BAND_UHF, /* band_caps */
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
|
|
* P_agc_nb_est=2, P_agc_write=0
|
|
*/
|
|
(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
|
|
(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
|
|
|
|
712, /* inv_gain */
|
|
21, /* time_stabiliz */
|
|
|
|
0, /* alpha_level */
|
|
118, /* thlock */
|
|
|
|
0, /* wbd_inv */
|
|
2867, /* wbd_ref */
|
|
0, /* wbd_sel */
|
|
2, /* wbd_alpha */
|
|
|
|
0, /* agc1_max */
|
|
0, /* agc1_min */
|
|
39718, /* agc2_max */
|
|
9930, /* agc2_min */
|
|
0, /* agc1_pt1 */
|
|
0, /* agc1_pt2 */
|
|
0, /* agc1_pt3 */
|
|
0, /* agc1_slope1 */
|
|
0, /* agc1_slope2 */
|
|
0, /* agc2_pt1 */
|
|
128, /* agc2_pt2 */
|
|
29, /* agc2_slope1 */
|
|
29, /* agc2_slope2 */
|
|
|
|
17, /* alpha_mant */
|
|
27, /* alpha_exp */
|
|
23, /* beta_mant */
|
|
51, /* beta_exp */
|
|
|
|
1, /* perform_agc_softsplit */
|
|
};
|
|
|
|
/* PLL Configuration for COFDM BW_MHz = 8.000000
|
|
* With external clock = 30.000000 */
|
|
static struct dibx000_bandwidth_config xc3028_bw_config = {
|
|
60000, /* internal */
|
|
30000, /* sampling */
|
|
1, /* pll_cfg: prediv */
|
|
8, /* pll_cfg: ratio */
|
|
3, /* pll_cfg: range */
|
|
1, /* pll_cfg: reset */
|
|
0, /* pll_cfg: bypass */
|
|
0, /* misc: refdiv */
|
|
0, /* misc: bypclk_div */
|
|
1, /* misc: IO_CLK_en_core */
|
|
1, /* misc: ADClkSrc */
|
|
0, /* misc: modulo */
|
|
(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
|
|
(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
|
|
20452225, /* timf */
|
|
30000000 /* xtal_hz */
|
|
};
|
|
|
|
static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
.hostbus_diversity = 1,
|
|
.tuner_is_baseband = 0,
|
|
.update_lna = NULL,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &xc3028_agc_config,
|
|
.bw = &xc3028_bw_config,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.pwm_freq_div = 0,
|
|
.agc_control = NULL,
|
|
.spur_protect = 0,
|
|
|
|
.output_mode = OUTMODE_MPEG2_SERIAL,
|
|
};
|
|
|
|
static struct zl10353_config dvico_fusionhdtv_xc3028 = {
|
|
.demod_address = 0x0f,
|
|
.if2 = 45600,
|
|
.no_tuner = 1,
|
|
.disable_i2c_gate_ctrl = 1,
|
|
};
|
|
|
|
static struct stv0900_reg stv0900_ts_regs[] = {
|
|
{ R0900_TSGENERAL, 0x00 },
|
|
{ R0900_P1_TSSPEED, 0x40 },
|
|
{ R0900_P2_TSSPEED, 0x40 },
|
|
{ R0900_P1_TSCFGM, 0xc0 },
|
|
{ R0900_P2_TSCFGM, 0xc0 },
|
|
{ R0900_P1_TSCFGH, 0xe0 },
|
|
{ R0900_P2_TSCFGH, 0xe0 },
|
|
{ R0900_P1_TSCFGL, 0x20 },
|
|
{ R0900_P2_TSCFGL, 0x20 },
|
|
{ 0xffff, 0xff }, /* terminate */
|
|
};
|
|
|
|
static struct stv0900_config netup_stv0900_config = {
|
|
.demod_address = 0x68,
|
|
.demod_mode = 1, /* dual */
|
|
.xtal = 8000000,
|
|
.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
|
|
.diseqc_mode = 2,/* 2/3 PWM */
|
|
.ts_config_regs = stv0900_ts_regs,
|
|
.tun1_maddress = 0,/* 0x60 */
|
|
.tun2_maddress = 3,/* 0x63 */
|
|
.tun1_adc = 1,/* 1 Vpp */
|
|
.tun2_adc = 1,/* 1 Vpp */
|
|
};
|
|
|
|
static struct stv6110_config netup_stv6110_tunerconfig_a = {
|
|
.i2c_address = 0x60,
|
|
.mclk = 16000000,
|
|
.clk_div = 1,
|
|
.gain = 8, /* +16 dB - maximum gain */
|
|
};
|
|
|
|
static struct stv6110_config netup_stv6110_tunerconfig_b = {
|
|
.i2c_address = 0x63,
|
|
.mclk = 16000000,
|
|
.clk_div = 1,
|
|
.gain = 8, /* +16 dB - maximum gain */
|
|
};
|
|
|
|
static struct cx24116_config tbs_cx24116_config = {
|
|
.demod_address = 0x55,
|
|
};
|
|
|
|
static struct cx24117_config tbs_cx24117_config = {
|
|
.demod_address = 0x55,
|
|
};
|
|
|
|
static struct ds3000_config tevii_ds3000_config = {
|
|
.demod_address = 0x68,
|
|
};
|
|
|
|
static struct ts2020_config tevii_ts2020_config = {
|
|
.tuner_address = 0x60,
|
|
.clk_out_div = 1,
|
|
.frequency_div = 1146000,
|
|
};
|
|
|
|
static struct cx24116_config dvbworld_cx24116_config = {
|
|
.demod_address = 0x05,
|
|
};
|
|
|
|
static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
|
|
.prod = LGS8GXX_PROD_LGS8GL5,
|
|
.demod_address = 0x19,
|
|
.serial_ts = 0,
|
|
.ts_clk_pol = 1,
|
|
.ts_clk_gated = 1,
|
|
.if_clk_freq = 30400, /* 30.4 MHz */
|
|
.if_freq = 5380, /* 5.38 MHz */
|
|
.if_neg_center = 1,
|
|
.ext_adc = 0,
|
|
.adc_signed = 0,
|
|
.if_neg_edge = 0,
|
|
};
|
|
|
|
static struct xc5000_config mygica_x8506_xc5000_config = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 5380,
|
|
};
|
|
|
|
static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
|
|
.demod_address = 0x10,
|
|
};
|
|
|
|
static struct xc5000_config mygica_x8507_xc5000_config = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 4000,
|
|
};
|
|
|
|
static struct stv090x_config prof_8000_stv090x_config = {
|
|
.device = STV0903,
|
|
.demod_mode = STV090x_SINGLE,
|
|
.clk_mode = STV090x_CLK_EXT,
|
|
.xtal = 27000000,
|
|
.address = 0x6A,
|
|
.ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED,
|
|
.repeater_level = STV090x_RPTLEVEL_64,
|
|
.adc1_range = STV090x_ADC_2Vpp,
|
|
.diseqc_envelope_mode = false,
|
|
|
|
.tuner_get_frequency = stb6100_get_frequency,
|
|
.tuner_set_frequency = stb6100_set_frequency,
|
|
.tuner_set_bandwidth = stb6100_set_bandwidth,
|
|
.tuner_get_bandwidth = stb6100_get_bandwidth,
|
|
};
|
|
|
|
static struct stb6100_config prof_8000_stb6100_config = {
|
|
.tuner_address = 0x60,
|
|
.refclock = 27000000,
|
|
};
|
|
|
|
static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {
|
|
.i2c_addr = 0x59,
|
|
.qam_if_khz = 4000,
|
|
.vsb_if_khz = 3250,
|
|
.deny_i2c_rptr = 1, /* Disabled */
|
|
.spectral_inversion = 0, /* Disabled */
|
|
.mpeg_mode = LGDT3306A_MPEG_SERIAL,
|
|
.tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
|
|
.tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
|
|
.xtalMHz = 25, /* 24 or 25 */
|
|
};
|
|
|
|
static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {
|
|
.i2c_addr = 0x0e,
|
|
.qam_if_khz = 4000,
|
|
.vsb_if_khz = 3250,
|
|
.deny_i2c_rptr = 1, /* Disabled */
|
|
.spectral_inversion = 0, /* Disabled */
|
|
.mpeg_mode = LGDT3306A_MPEG_SERIAL,
|
|
.tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
|
|
.tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
|
|
.xtalMHz = 25, /* 24 or 25 */
|
|
};
|
|
|
|
static int p8000_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
struct cx23885_tsport *port = fe->dvb->priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
|
|
if (voltage == SEC_VOLTAGE_18)
|
|
cx_write(MC417_RWD, 0x00001e00);
|
|
else if (voltage == SEC_VOLTAGE_13)
|
|
cx_write(MC417_RWD, 0x00001a00);
|
|
else
|
|
cx_write(MC417_RWD, 0x00001800);
|
|
return 0;
|
|
}
|
|
|
|
static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
struct cx23885_tsport *port = fe->dvb->priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
|
|
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
|
|
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_13:
|
|
cx23885_gpio_set(dev, GPIO_1);
|
|
cx23885_gpio_clear(dev, GPIO_0);
|
|
break;
|
|
case SEC_VOLTAGE_18:
|
|
cx23885_gpio_set(dev, GPIO_1);
|
|
cx23885_gpio_set(dev, GPIO_0);
|
|
break;
|
|
case SEC_VOLTAGE_OFF:
|
|
cx23885_gpio_clear(dev, GPIO_1);
|
|
cx23885_gpio_clear(dev, GPIO_0);
|
|
break;
|
|
}
|
|
|
|
/* call the frontend set_voltage function */
|
|
port->fe_set_voltage(fe, voltage);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
struct cx23885_tsport *port = fe->dvb->priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
|
|
cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
|
|
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_13:
|
|
cx23885_gpio_set(dev, GPIO_13);
|
|
cx23885_gpio_clear(dev, GPIO_12);
|
|
break;
|
|
case SEC_VOLTAGE_18:
|
|
cx23885_gpio_set(dev, GPIO_13);
|
|
cx23885_gpio_set(dev, GPIO_12);
|
|
break;
|
|
case SEC_VOLTAGE_OFF:
|
|
cx23885_gpio_clear(dev, GPIO_13);
|
|
cx23885_gpio_clear(dev, GPIO_12);
|
|
break;
|
|
}
|
|
/* call the frontend set_voltage function */
|
|
return port->fe_set_voltage(fe, voltage);
|
|
}
|
|
|
|
static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
|
|
u8 data, int *mem)
|
|
{
|
|
/* MC417 */
|
|
#define SP2_DATA 0x000000ff
|
|
#define SP2_WR 0x00008000
|
|
#define SP2_RD 0x00004000
|
|
#define SP2_ACK 0x00001000
|
|
#define SP2_ADHI 0x00000800
|
|
#define SP2_ADLO 0x00000400
|
|
#define SP2_CS1 0x00000200
|
|
#define SP2_CS0 0x00000100
|
|
#define SP2_EN_ALL 0x00001000
|
|
#define SP2_CTRL_OFF (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)
|
|
|
|
struct cx23885_tsport *port = priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
int ret;
|
|
int tmp = 0;
|
|
unsigned long timeout;
|
|
|
|
mutex_lock(&dev->gpio_lock);
|
|
|
|
/* write addr */
|
|
cx_write(MC417_OEN, SP2_EN_ALL);
|
|
cx_write(MC417_RWD, SP2_CTRL_OFF |
|
|
SP2_ADLO | (0xff & addr));
|
|
cx_clear(MC417_RWD, SP2_ADLO);
|
|
cx_write(MC417_RWD, SP2_CTRL_OFF |
|
|
SP2_ADHI | (0xff & (addr >> 8)));
|
|
cx_clear(MC417_RWD, SP2_ADHI);
|
|
|
|
if (read)
|
|
/* data in */
|
|
cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);
|
|
else
|
|
/* data out */
|
|
cx_write(MC417_RWD, SP2_CTRL_OFF | data);
|
|
|
|
/* chip select 0 */
|
|
cx_clear(MC417_RWD, SP2_CS0);
|
|
|
|
/* read/write */
|
|
cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);
|
|
|
|
/* wait for a maximum of 1 msec */
|
|
timeout = jiffies + msecs_to_jiffies(1);
|
|
while (!time_after(jiffies, timeout)) {
|
|
tmp = cx_read(MC417_RWD);
|
|
if ((tmp & SP2_ACK) == 0)
|
|
break;
|
|
usleep_range(50, 100);
|
|
}
|
|
|
|
cx_set(MC417_RWD, SP2_CTRL_OFF);
|
|
*mem = tmp & 0xff;
|
|
|
|
mutex_unlock(&dev->gpio_lock);
|
|
|
|
if (!read) {
|
|
if (*mem < 0) {
|
|
ret = -EREMOTEIO;
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct cx23885_tsport *port = fe->dvb->priv;
|
|
struct cx23885_dev *dev = port->dev;
|
|
|
|
switch (dev->board) {
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1275:
|
|
switch (p->modulation) {
|
|
case VSB_8:
|
|
cx23885_gpio_clear(dev, GPIO_5);
|
|
break;
|
|
case QAM_64:
|
|
case QAM_256:
|
|
default:
|
|
cx23885_gpio_set(dev, GPIO_5);
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_MYGICA_X8506:
|
|
case CX23885_BOARD_MYGICA_X8507:
|
|
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
|
|
/* Select Digital TV */
|
|
cx23885_gpio_set(dev, GPIO_0);
|
|
break;
|
|
}
|
|
|
|
/* Call the real set_frontend */
|
|
if (port->set_frontend)
|
|
return port->set_frontend(fe);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cx23885_set_frontend_hook(struct cx23885_tsport *port,
|
|
struct dvb_frontend *fe)
|
|
{
|
|
port->set_frontend = fe->ops.set_frontend;
|
|
fe->ops.set_frontend = cx23885_dvb_set_frontend;
|
|
}
|
|
|
|
static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
|
|
.prod = LGS8GXX_PROD_LGS8G75,
|
|
.demod_address = 0x19,
|
|
.serial_ts = 0,
|
|
.ts_clk_pol = 1,
|
|
.ts_clk_gated = 1,
|
|
.if_clk_freq = 30400, /* 30.4 MHz */
|
|
.if_freq = 6500, /* 6.50 MHz */
|
|
.if_neg_center = 1,
|
|
.ext_adc = 0,
|
|
.adc_signed = 1,
|
|
.adc_vpp = 2, /* 1.6 Vpp */
|
|
.if_neg_edge = 1,
|
|
};
|
|
|
|
static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 6500,
|
|
};
|
|
|
|
static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
|
|
.prod = ATBM8830_PROD_8830,
|
|
.demod_address = 0x44,
|
|
.serial_ts = 0,
|
|
.ts_sampling_edge = 1,
|
|
.ts_clk_gated = 0,
|
|
.osc_clk_freq = 30400, /* in kHz */
|
|
.if_freq = 0, /* zero IF */
|
|
.zif_swap_iq = 1,
|
|
.agc_min = 0x2E,
|
|
.agc_max = 0xFF,
|
|
.agc_hold_loop = 0,
|
|
};
|
|
|
|
static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
|
|
.i2c_address = 0x60,
|
|
.osc_clk = 20
|
|
};
|
|
|
|
static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
|
|
.prod = ATBM8830_PROD_8830,
|
|
.demod_address = 0x44,
|
|
.serial_ts = 1,
|
|
.ts_sampling_edge = 1,
|
|
.ts_clk_gated = 0,
|
|
.osc_clk_freq = 30400, /* in kHz */
|
|
.if_freq = 0, /* zero IF */
|
|
.zif_swap_iq = 1,
|
|
.agc_min = 0x2E,
|
|
.agc_max = 0xFF,
|
|
.agc_hold_loop = 0,
|
|
};
|
|
|
|
static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
|
|
.i2c_address = 0x60,
|
|
.osc_clk = 20
|
|
};
|
|
static struct stv0367_config netup_stv0367_config[] = {
|
|
{
|
|
.demod_address = 0x1c,
|
|
.xtal = 27000000,
|
|
.if_khz = 4500,
|
|
.if_iq_mode = 0,
|
|
.ts_mode = 1,
|
|
.clk_pol = 0,
|
|
}, {
|
|
.demod_address = 0x1d,
|
|
.xtal = 27000000,
|
|
.if_khz = 4500,
|
|
.if_iq_mode = 0,
|
|
.ts_mode = 1,
|
|
.clk_pol = 0,
|
|
},
|
|
};
|
|
|
|
static struct xc5000_config netup_xc5000_config[] = {
|
|
{
|
|
.i2c_address = 0x61,
|
|
.if_khz = 4500,
|
|
}, {
|
|
.i2c_address = 0x64,
|
|
.if_khz = 4500,
|
|
},
|
|
};
|
|
|
|
static struct drxk_config terratec_drxk_config[] = {
|
|
{
|
|
.adr = 0x29,
|
|
.no_i2c_bridge = 1,
|
|
}, {
|
|
.adr = 0x2a,
|
|
.no_i2c_bridge = 1,
|
|
},
|
|
};
|
|
|
|
static struct mt2063_config terratec_mt2063_config[] = {
|
|
{
|
|
.tuner_address = 0x60,
|
|
}, {
|
|
.tuner_address = 0x67,
|
|
},
|
|
};
|
|
|
|
static const struct tda10071_platform_data hauppauge_tda10071_pdata = {
|
|
.clk = 40444000, /* 40.444 MHz */
|
|
.i2c_wr_max = 64,
|
|
.ts_mode = TDA10071_TS_SERIAL,
|
|
.pll_multiplier = 20,
|
|
.tuner_i2c_addr = 0x54,
|
|
};
|
|
|
|
static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
|
|
.i2c_addr = 0x68,
|
|
.clock = 27000000,
|
|
.i2c_wr_max = 33,
|
|
.clock_out = 0,
|
|
.ts_mode = M88DS3103_TS_PARALLEL,
|
|
.ts_clk = 16000,
|
|
.ts_clk_pol = 1,
|
|
.lnb_en_pol = 1,
|
|
.lnb_hv_pol = 0,
|
|
.agc = 0x99,
|
|
};
|
|
|
|
static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
|
|
.i2c_addr = 0x68,
|
|
.clock = 27000000,
|
|
.i2c_wr_max = 33,
|
|
.clock_out = 0,
|
|
.ts_mode = M88DS3103_TS_CI,
|
|
.ts_clk = 10000,
|
|
.ts_clk_pol = 1,
|
|
.lnb_en_pol = 1,
|
|
.lnb_hv_pol = 0,
|
|
.agc = 0x99,
|
|
};
|
|
|
|
static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {
|
|
.i2c_addr = 0x69,
|
|
.clock = 27000000,
|
|
.i2c_wr_max = 33,
|
|
.ts_mode = M88DS3103_TS_PARALLEL,
|
|
.ts_clk = 16000,
|
|
.ts_clk_pol = 1,
|
|
.agc = 0x99,
|
|
};
|
|
|
|
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
|
|
{
|
|
struct cx23885_dev *dev = (struct cx23885_dev *)device;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1);
|
|
uint32_t mem = 0;
|
|
|
|
mem = cx_read(MC417_RWD);
|
|
if (read)
|
|
cx_set(MC417_OEN, ALT_DATA);
|
|
else {
|
|
cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
|
|
mem &= ~ALT_DATA;
|
|
mem |= (data & ALT_DATA);
|
|
}
|
|
|
|
if (flag)
|
|
mem |= ALT_AD_RG;
|
|
else
|
|
mem &= ~ALT_AD_RG;
|
|
|
|
mem &= ~ALT_CS;
|
|
if (read)
|
|
mem = (mem & ~ALT_RD) | ALT_WR;
|
|
else
|
|
mem = (mem & ~ALT_WR) | ALT_RD;
|
|
|
|
cx_write(MC417_RWD, mem); /* start RW cycle */
|
|
|
|
for (;;) {
|
|
mem = cx_read(MC417_RWD);
|
|
if ((mem & ALT_RDY) == 0)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
|
|
if (read)
|
|
return mem & ALT_DATA;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct dib7000p_ops *dib7000p_ops = fe->sec_priv;
|
|
|
|
return dib7000p_ops->set_gpio(fe, 8, 0, !onoff);
|
|
}
|
|
|
|
static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct dib0070_config dib7070p_dib0070_config = {
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib7070_tuner_reset,
|
|
.sleep = dib7070_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.freq_offset_khz_vhf = 550,
|
|
/* .flip_chip = 1, */
|
|
};
|
|
|
|
/* DIB7070 generic */
|
|
static struct dibx000_agc_config dib7070_agc_config = {
|
|
.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
|
|
|
|
/*
|
|
* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
|
|
*/
|
|
.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
|
|
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
.inv_gain = 600,
|
|
.time_stabiliz = 10,
|
|
.alpha_level = 0,
|
|
.thlock = 118,
|
|
.wbd_inv = 0,
|
|
.wbd_ref = 3530,
|
|
.wbd_sel = 1,
|
|
.wbd_alpha = 5,
|
|
.agc1_max = 65535,
|
|
.agc1_min = 0,
|
|
.agc2_max = 65535,
|
|
.agc2_min = 0,
|
|
.agc1_pt1 = 0,
|
|
.agc1_pt2 = 40,
|
|
.agc1_pt3 = 183,
|
|
.agc1_slope1 = 206,
|
|
.agc1_slope2 = 255,
|
|
.agc2_pt1 = 72,
|
|
.agc2_pt2 = 152,
|
|
.agc2_slope1 = 88,
|
|
.agc2_slope2 = 90,
|
|
.alpha_mant = 17,
|
|
.alpha_exp = 27,
|
|
.beta_mant = 23,
|
|
.beta_exp = 51,
|
|
.perform_agc_softsplit = 0,
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
|
|
.internal = 60000,
|
|
.sampling = 15000,
|
|
.pll_prediv = 1,
|
|
.pll_ratio = 20,
|
|
.pll_range = 3,
|
|
.pll_reset = 1,
|
|
.pll_bypass = 0,
|
|
.enable_refdiv = 0,
|
|
.bypclk_div = 0,
|
|
.IO_CLK_en_core = 1,
|
|
.ADClkSrc = 1,
|
|
.modulo = 2,
|
|
/* refsel, sel, freq_15k */
|
|
.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
|
|
.ifreq = (0 << 25) | 0,
|
|
.timf = 20452225,
|
|
.xtal_hz = 12000000,
|
|
};
|
|
|
|
static struct dib7000p_config dib7070p_dib7000p_config = {
|
|
/* .output_mode = OUTMODE_MPEG2_FIFO, */
|
|
.output_mode = OUTMODE_MPEG2_SERIAL,
|
|
/* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &dib7070_agc_config,
|
|
.bw = &dib7070_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
.spur_protect = 1,
|
|
|
|
.gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */
|
|
.gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
};
|
|
|
|
static int dvb_register_ci_mac(struct cx23885_tsport *port)
|
|
{
|
|
struct cx23885_dev *dev = port->dev;
|
|
struct i2c_client *client_ci = NULL;
|
|
struct vb2_dvb_frontend *fe0;
|
|
|
|
fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
|
|
if (!fe0)
|
|
return -EINVAL;
|
|
|
|
switch (dev->board) {
|
|
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
|
|
static struct netup_card_info cinfo;
|
|
|
|
netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
|
|
memcpy(port->frontends.adapter.proposed_mac,
|
|
cinfo.port[port->nr - 1].mac, 6);
|
|
pr_info("NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
|
|
port->nr, port->frontends.adapter.proposed_mac);
|
|
|
|
netup_ci_init(port);
|
|
return 0;
|
|
}
|
|
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
|
|
struct altera_ci_config netup_ci_cfg = {
|
|
.dev = dev,/* magic number to identify*/
|
|
.adapter = &port->frontends.adapter,/* for CI */
|
|
.demux = &fe0->dvb.demux,/* for hw pid filter */
|
|
.fpga_rw = netup_altera_fpga_rw,
|
|
};
|
|
|
|
altera_ci_init(&netup_ci_cfg, port->nr);
|
|
return 0;
|
|
}
|
|
case CX23885_BOARD_TEVII_S470: {
|
|
u8 eeprom[256]; /* 24C02 i2c eeprom */
|
|
|
|
if (port->nr != 1)
|
|
return 0;
|
|
|
|
/* Read entire EEPROM */
|
|
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
|
|
tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
|
|
pr_info("TeVii S470 MAC= %pM\n", eeprom + 0xa0);
|
|
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
|
|
return 0;
|
|
}
|
|
case CX23885_BOARD_DVBSKY_T9580:
|
|
case CX23885_BOARD_DVBSKY_S950:
|
|
case CX23885_BOARD_DVBSKY_S952:
|
|
case CX23885_BOARD_DVBSKY_T982: {
|
|
u8 eeprom[256]; /* 24C02 i2c eeprom */
|
|
|
|
if (port->nr > 2)
|
|
return 0;
|
|
|
|
/* Read entire EEPROM */
|
|
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
|
|
tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
|
|
sizeof(eeprom));
|
|
pr_info("%s port %d MAC address: %pM\n",
|
|
cx23885_boards[dev->board].name, port->nr,
|
|
eeprom + 0xc0 + (port->nr-1) * 8);
|
|
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
|
|
(port->nr-1) * 8, 6);
|
|
return 0;
|
|
}
|
|
case CX23885_BOARD_DVBSKY_S950C:
|
|
case CX23885_BOARD_DVBSKY_T980C:
|
|
case CX23885_BOARD_TT_CT2_4500_CI: {
|
|
u8 eeprom[256]; /* 24C02 i2c eeprom */
|
|
struct sp2_config sp2_config;
|
|
struct i2c_board_info info;
|
|
struct cx23885_i2c *i2c_bus = &dev->i2c_bus[0];
|
|
|
|
/* attach CI */
|
|
memset(&sp2_config, 0, sizeof(sp2_config));
|
|
sp2_config.dvb_adap = &port->frontends.adapter;
|
|
sp2_config.priv = port;
|
|
sp2_config.ci_control = cx23885_sp2_ci_ctrl;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "sp2", I2C_NAME_SIZE);
|
|
info.addr = 0x40;
|
|
info.platform_data = &sp2_config;
|
|
request_module(info.type);
|
|
client_ci = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (client_ci == NULL || client_ci->dev.driver == NULL)
|
|
return -ENODEV;
|
|
if (!try_module_get(client_ci->dev.driver->owner)) {
|
|
i2c_unregister_device(client_ci);
|
|
return -ENODEV;
|
|
}
|
|
port->i2c_client_ci = client_ci;
|
|
|
|
if (port->nr != 1)
|
|
return 0;
|
|
|
|
/* Read entire EEPROM */
|
|
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
|
|
tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
|
|
sizeof(eeprom));
|
|
pr_info("%s MAC address: %pM\n",
|
|
cx23885_boards[dev->board].name, eeprom + 0xc0);
|
|
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dvb_register(struct cx23885_tsport *port)
|
|
{
|
|
struct dib7000p_ops dib7000p_ops;
|
|
struct cx23885_dev *dev = port->dev;
|
|
struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
|
|
struct vb2_dvb_frontend *fe0, *fe1 = NULL;
|
|
struct si2168_config si2168_config;
|
|
struct si2165_platform_data si2165_pdata;
|
|
struct si2157_config si2157_config;
|
|
struct ts2020_config ts2020_config;
|
|
struct m88ds3103_platform_data m88ds3103_pdata;
|
|
struct i2c_board_info info;
|
|
struct i2c_adapter *adapter;
|
|
struct i2c_client *client_demod = NULL, *client_tuner = NULL;
|
|
struct i2c_client *client_sec = NULL;
|
|
int (*p_set_voltage)(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage) = NULL;
|
|
int mfe_shared = 0; /* bus not shared by default */
|
|
int ret;
|
|
|
|
/* Get the first frontend */
|
|
fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
|
|
if (!fe0)
|
|
return -EINVAL;
|
|
|
|
/* init struct vb2_dvb */
|
|
fe0->dvb.name = dev->name;
|
|
|
|
/* multi-frontend gate control is undefined or defaults to fe0 */
|
|
port->frontends.gate = 0;
|
|
|
|
/* Sets the gate control callback to be used by i2c command calls */
|
|
port->gate_ctrl = cx23885_dvb_gate_ctrl;
|
|
|
|
/* init frontend */
|
|
switch (dev->board) {
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1250:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
|
|
&hauppauge_generic_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(mt2131_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&hauppauge_generic_tunerconfig, 0);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1270:
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1275:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
|
|
&hauppauge_lgdt3305_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_hvr127x_config);
|
|
if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275)
|
|
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1255:
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
|
|
&hcw_s5h1411_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
|
|
tda18271_attach(&dev->ts1.analog_fe,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1800:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
switch (alt_tuner) {
|
|
case 1:
|
|
fe0->dvb.frontend =
|
|
dvb_attach(s5h1409_attach,
|
|
&hauppauge_ezqam_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
dvb_attach(tda829x_attach, fe0->dvb.frontend,
|
|
&dev->i2c_bus[1].i2c_adap, 0x42,
|
|
&tda829x_no_probe);
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
break;
|
|
case 0:
|
|
default:
|
|
fe0->dvb.frontend =
|
|
dvb_attach(s5h1409_attach,
|
|
&hauppauge_generic_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(mt2131_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&hauppauge_generic_tunerconfig, 0);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
|
|
&hauppauge_hvr1800lp_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(mt2131_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&hauppauge_generic_tunerconfig, 0);
|
|
break;
|
|
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
|
|
&fusionhdtv_5_express,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap, 0x61,
|
|
TUNER_LG_TDVS_H06XF);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
|
|
&hauppauge_hvr1500q_config,
|
|
&dev->i2c_bus[0].i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&hauppauge_hvr1500q_tunerconfig);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1500:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
|
|
&hauppauge_hvr1500_config,
|
|
&dev->i2c_bus[0].i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct dvb_frontend *fe;
|
|
struct xc2028_config cfg = {
|
|
.i2c_adap = &i2c_bus->i2c_adap,
|
|
.i2c_addr = 0x61,
|
|
};
|
|
static struct xc2028_ctrl ctl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_OREN538,
|
|
};
|
|
|
|
fe = dvb_attach(xc2028_attach,
|
|
fe0->dvb.frontend, &cfg);
|
|
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
|
|
fe->ops.tuner_ops.set_config(fe, &ctl);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1200:
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1700:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(tda10048_attach,
|
|
&hauppauge_hvr1200_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(tda829x_attach, fe0->dvb.frontend,
|
|
&dev->i2c_bus[1].i2c_adap, 0x42,
|
|
&tda829x_no_probe);
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_hvr1200_tuner_config);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1210:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(tda10048_attach,
|
|
&hauppauge_hvr1210_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_hvr1210_tuner_config);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1400:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
|
|
if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
|
|
return -ENODEV;
|
|
|
|
fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap,
|
|
0x12, &hauppauge_hvr1400_dib7000_config);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct dvb_frontend *fe;
|
|
struct xc2028_config cfg = {
|
|
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
|
|
.i2c_addr = 0x64,
|
|
};
|
|
static struct xc2028_ctrl ctl = {
|
|
.fname = XC3028L_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_DIBCOM52,
|
|
/* This is true for all demods with
|
|
v36 firmware? */
|
|
.type = XC2028_D2633,
|
|
};
|
|
|
|
fe = dvb_attach(xc2028_attach,
|
|
fe0->dvb.frontend, &cfg);
|
|
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
|
|
fe->ops.tuner_ops.set_config(fe, &ctl);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
|
|
i2c_bus = &dev->i2c_bus[port->nr - 1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
|
|
&dvico_s5h1409_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
|
|
&dvico_s5h1411_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL)
|
|
dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&dvico_xc5000_tunerconfig);
|
|
break;
|
|
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
|
|
i2c_bus = &dev->i2c_bus[port->nr - 1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(zl10353_attach,
|
|
&dvico_fusionhdtv_xc3028,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct dvb_frontend *fe;
|
|
struct xc2028_config cfg = {
|
|
.i2c_adap = &i2c_bus->i2c_adap,
|
|
.i2c_addr = 0x61,
|
|
};
|
|
static struct xc2028_ctrl ctl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_ZARLINK456,
|
|
};
|
|
|
|
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
|
|
&cfg);
|
|
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
|
|
fe->ops.tuner_ops.set_config(fe, &ctl);
|
|
}
|
|
break;
|
|
}
|
|
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: {
|
|
i2c_bus = &dev->i2c_bus[port->nr - 1];
|
|
/* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */
|
|
/* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */
|
|
|
|
if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
|
|
return -ENODEV;
|
|
|
|
if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) {
|
|
pr_warn("Unable to enumerate dib7000p\n");
|
|
return -ENODEV;
|
|
}
|
|
fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct i2c_adapter *tun_i2c;
|
|
|
|
fe0->dvb.frontend->sec_priv = kmemdup(&dib7000p_ops, sizeof(dib7000p_ops), GFP_KERNEL);
|
|
if (!fe0->dvb.frontend->sec_priv)
|
|
return -ENOMEM;
|
|
tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
|
|
return -ENODEV;
|
|
}
|
|
break;
|
|
}
|
|
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
|
|
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
|
|
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
|
|
fe0->dvb.frontend = dvb_attach(zl10353_attach,
|
|
&dvico_fusionhdtv_xc3028,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct dvb_frontend *fe;
|
|
struct xc2028_config cfg = {
|
|
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
|
|
.i2c_addr = 0x61,
|
|
};
|
|
static struct xc2028_ctrl ctl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_ZARLINK456,
|
|
};
|
|
|
|
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
|
|
&cfg);
|
|
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
|
|
fe->ops.tuner_ops.set_config(fe, &ctl);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
|
|
fe0->dvb.frontend = dvb_attach(zl10353_attach,
|
|
&dvico_fusionhdtv_xc3028,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
struct dvb_frontend *fe;
|
|
struct xc4000_config cfg = {
|
|
.i2c_address = 0x61,
|
|
.default_pm = 0,
|
|
.dvb_amplitude = 134,
|
|
.set_smoothedcvbs = 1,
|
|
.if_khz = 4560
|
|
};
|
|
|
|
fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
|
|
&dev->i2c_bus[1].i2c_adap, &cfg);
|
|
if (!fe) {
|
|
pr_err("%s/2: xc4000 attach failed\n",
|
|
dev->name);
|
|
goto frontend_detach;
|
|
}
|
|
}
|
|
break;
|
|
case CX23885_BOARD_TBS_6920:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(cx24116_attach,
|
|
&tbs_cx24116_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL)
|
|
fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
|
|
|
|
break;
|
|
case CX23885_BOARD_TBS_6980:
|
|
case CX23885_BOARD_TBS_6981:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
|
|
switch (port->nr) {
|
|
/* PORT B */
|
|
case 1:
|
|
fe0->dvb.frontend = dvb_attach(cx24117_attach,
|
|
&tbs_cx24117_config,
|
|
&i2c_bus->i2c_adap);
|
|
break;
|
|
/* PORT C */
|
|
case 2:
|
|
fe0->dvb.frontend = dvb_attach(cx24117_attach,
|
|
&tbs_cx24117_config,
|
|
&i2c_bus->i2c_adap);
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_TEVII_S470:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(ds3000_attach,
|
|
&tevii_ds3000_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
dvb_attach(ts2020_attach, fe0->dvb.frontend,
|
|
&tevii_ts2020_config, &i2c_bus->i2c_adap);
|
|
fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
|
|
}
|
|
|
|
break;
|
|
case CX23885_BOARD_DVBWORLD_2005:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(cx24116_attach,
|
|
&dvbworld_cx24116_config,
|
|
&i2c_bus->i2c_adap);
|
|
break;
|
|
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
switch (port->nr) {
|
|
/* port B */
|
|
case 1:
|
|
fe0->dvb.frontend = dvb_attach(stv0900_attach,
|
|
&netup_stv0900_config,
|
|
&i2c_bus->i2c_adap, 0);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
if (dvb_attach(stv6110_attach,
|
|
fe0->dvb.frontend,
|
|
&netup_stv6110_tunerconfig_a,
|
|
&i2c_bus->i2c_adap)) {
|
|
if (!dvb_attach(lnbh24_attach,
|
|
fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
LNBH24_PCL | LNBH24_TTX,
|
|
LNBH24_TEN, 0x09))
|
|
pr_err("No LNBH24 found!\n");
|
|
|
|
}
|
|
}
|
|
break;
|
|
/* port C */
|
|
case 2:
|
|
fe0->dvb.frontend = dvb_attach(stv0900_attach,
|
|
&netup_stv0900_config,
|
|
&i2c_bus->i2c_adap, 1);
|
|
if (fe0->dvb.frontend != NULL) {
|
|
if (dvb_attach(stv6110_attach,
|
|
fe0->dvb.frontend,
|
|
&netup_stv6110_tunerconfig_b,
|
|
&i2c_bus->i2c_adap)) {
|
|
if (!dvb_attach(lnbh24_attach,
|
|
fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
LNBH24_PCL | LNBH24_TTX,
|
|
LNBH24_TEN, 0x0a))
|
|
pr_err("No LNBH24 found!\n");
|
|
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_MYGICA_X8506:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
|
|
&mygica_x8506_lgs8gl5_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config);
|
|
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
|
|
break;
|
|
case CX23885_BOARD_MYGICA_X8507:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
|
|
&mygica_x8507_mb86a20s_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus2->i2c_adap,
|
|
&mygica_x8507_xc5000_config);
|
|
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
|
|
break;
|
|
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
|
|
&magicpro_prohdtve2_lgs8g75_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus2->i2c_adap,
|
|
&magicpro_prohdtve2_xc5000_config);
|
|
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1850:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
|
|
&hcw_s5h1411_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[0].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
|
|
tda18271_attach(&dev->ts1.analog_fe,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR1290:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
|
|
&hcw_s5h1411_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(tda18271_attach, fe0->dvb.frontend,
|
|
0x60, &dev->i2c_bus[0].i2c_adap,
|
|
&hauppauge_tda18271_config);
|
|
break;
|
|
case CX23885_BOARD_MYGICA_X8558PRO:
|
|
switch (port->nr) {
|
|
/* port B */
|
|
case 1:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(atbm8830_attach,
|
|
&mygica_x8558pro_atbm8830_cfg1,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(max2165_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&mygic_x8558pro_max2165_cfg1);
|
|
break;
|
|
/* port C */
|
|
case 2:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
fe0->dvb.frontend = dvb_attach(atbm8830_attach,
|
|
&mygica_x8558pro_atbm8830_cfg2,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(max2165_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&mygic_x8558pro_max2165_cfg2);
|
|
}
|
|
break;
|
|
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
|
|
if (port->nr > 2)
|
|
return 0;
|
|
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
mfe_shared = 1;/* MFE */
|
|
port->frontends.gate = 0;/* not clear for me yet */
|
|
/* ports B, C */
|
|
/* MFE frontend 1 DVB-T */
|
|
fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
|
|
&netup_stv0367_config[port->nr - 1],
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&netup_xc5000_config[port->nr - 1]))
|
|
goto frontend_detach;
|
|
/* load xc5000 firmware */
|
|
fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
|
|
|
|
/* MFE frontend 2 */
|
|
fe1 = vb2_dvb_get_frontend(&port->frontends, 2);
|
|
if (fe1 == NULL)
|
|
goto frontend_detach;
|
|
/* DVB-C init */
|
|
fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
|
|
&netup_stv0367_config[port->nr - 1],
|
|
&i2c_bus->i2c_adap);
|
|
if (fe1->dvb.frontend == NULL)
|
|
break;
|
|
|
|
fe1->dvb.frontend->id = 1;
|
|
if (NULL == dvb_attach(xc5000_attach,
|
|
fe1->dvb.frontend,
|
|
&i2c_bus->i2c_adap,
|
|
&netup_xc5000_config[port->nr - 1]))
|
|
goto frontend_detach;
|
|
break;
|
|
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
|
|
switch (port->nr) {
|
|
/* port b */
|
|
case 1:
|
|
fe0->dvb.frontend = dvb_attach(drxk_attach,
|
|
&terratec_drxk_config[0],
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
if (!dvb_attach(mt2063_attach,
|
|
fe0->dvb.frontend,
|
|
&terratec_mt2063_config[0],
|
|
&i2c_bus2->i2c_adap))
|
|
goto frontend_detach;
|
|
break;
|
|
/* port c */
|
|
case 2:
|
|
fe0->dvb.frontend = dvb_attach(drxk_attach,
|
|
&terratec_drxk_config[1],
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
if (!dvb_attach(mt2063_attach,
|
|
fe0->dvb.frontend,
|
|
&terratec_mt2063_config[1],
|
|
&i2c_bus2->i2c_adap))
|
|
goto frontend_detach;
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_TEVII_S471:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
|
|
fe0->dvb.frontend = dvb_attach(ds3000_attach,
|
|
&tevii_ds3000_config,
|
|
&i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
dvb_attach(ts2020_attach, fe0->dvb.frontend,
|
|
&tevii_ts2020_config, &i2c_bus->i2c_adap);
|
|
break;
|
|
case CX23885_BOARD_PROF_8000:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
|
|
fe0->dvb.frontend = dvb_attach(stv090x_attach,
|
|
&prof_8000_stv090x_config,
|
|
&i2c_bus->i2c_adap,
|
|
STV090x_DEMODULATOR_0);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
if (!dvb_attach(stb6100_attach,
|
|
fe0->dvb.frontend,
|
|
&prof_8000_stb6100_config,
|
|
&i2c_bus->i2c_adap))
|
|
goto frontend_detach;
|
|
|
|
fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR4400: {
|
|
struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
|
|
struct a8293_platform_data a8293_pdata = {};
|
|
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
switch (port->nr) {
|
|
/* port b */
|
|
case 1:
|
|
/* attach demod + tuner combo */
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
|
|
info.addr = 0x05;
|
|
info.platform_data = &tda10071_pdata;
|
|
request_module("tda10071");
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (!client_demod || !client_demod->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach SEC */
|
|
a8293_pdata.dvb_frontend = fe0->dvb.frontend;
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "a8293", I2C_NAME_SIZE);
|
|
info.addr = 0x0b;
|
|
info.platform_data = &a8293_pdata;
|
|
request_module("a8293");
|
|
client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (!client_sec || !client_sec->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_sec->dev.driver->owner)) {
|
|
i2c_unregister_device(client_sec);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_sec = client_sec;
|
|
break;
|
|
/* port c */
|
|
case 2:
|
|
/* attach frontend */
|
|
memset(&si2165_pdata, 0, sizeof(si2165_pdata));
|
|
si2165_pdata.fe = &fe0->dvb.frontend;
|
|
si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL,
|
|
si2165_pdata.ref_freq_Hz = 16000000,
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2165", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2165_pdata;
|
|
request_module(info.type);
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (client_demod == NULL ||
|
|
client_demod->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
|
|
if (!dvb_attach(tda18271_attach,
|
|
fe0->dvb.frontend,
|
|
0x60, &i2c_bus2->i2c_adap,
|
|
&hauppauge_hvr4400_tuner_config))
|
|
goto frontend_detach;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
case CX23885_BOARD_HAUPPAUGE_STARBURST: {
|
|
struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
|
|
struct a8293_platform_data a8293_pdata = {};
|
|
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
|
|
/* attach demod + tuner combo */
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
|
|
info.addr = 0x05;
|
|
info.platform_data = &tda10071_pdata;
|
|
request_module("tda10071");
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (!client_demod || !client_demod->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach SEC */
|
|
a8293_pdata.dvb_frontend = fe0->dvb.frontend;
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "a8293", I2C_NAME_SIZE);
|
|
info.addr = 0x0b;
|
|
info.platform_data = &a8293_pdata;
|
|
request_module("a8293");
|
|
client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (!client_sec || !client_sec->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_sec->dev.driver->owner)) {
|
|
i2c_unregister_device(client_sec);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_sec = client_sec;
|
|
break;
|
|
}
|
|
case CX23885_BOARD_DVBSKY_T9580:
|
|
case CX23885_BOARD_DVBSKY_S950:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
switch (port->nr) {
|
|
/* port b - satellite */
|
|
case 1:
|
|
/* attach frontend */
|
|
fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
|
|
&dvbsky_t9580_m88ds3103_config,
|
|
&i2c_bus2->i2c_adap, &adapter);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
/* attach tuner */
|
|
memset(&ts2020_config, 0, sizeof(ts2020_config));
|
|
ts2020_config.fe = fe0->dvb.frontend;
|
|
ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &ts2020_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL ||
|
|
client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
|
|
/* delegate signal strength measurement to tuner */
|
|
fe0->dvb.frontend->ops.read_signal_strength =
|
|
fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
|
|
|
|
/*
|
|
* for setting the voltage we need to set GPIOs on
|
|
* the card.
|
|
*/
|
|
port->fe_set_voltage =
|
|
fe0->dvb.frontend->ops.set_voltage;
|
|
fe0->dvb.frontend->ops.set_voltage =
|
|
dvbsky_t9580_set_voltage;
|
|
|
|
port->i2c_client_tuner = client_tuner;
|
|
|
|
break;
|
|
/* port c - terrestrial/cable */
|
|
case 2:
|
|
/* attach frontend */
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2168_config;
|
|
request_module(info.type);
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (client_demod == NULL ||
|
|
client_demod->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL ||
|
|
client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_DVBSKY_T980C:
|
|
case CX23885_BOARD_TT_CT2_4500_CI:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
|
|
/* attach frontend */
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
si2168_config.ts_mode = SI2168_TS_PARALLEL;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2168_config;
|
|
request_module(info.type);
|
|
client_demod = i2c_new_device(&i2c_bus2->i2c_adap, &info);
|
|
if (client_demod == NULL || client_demod->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL ||
|
|
client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
case CX23885_BOARD_DVBSKY_S950C:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
i2c_bus2 = &dev->i2c_bus[1];
|
|
|
|
/* attach frontend */
|
|
fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
|
|
&dvbsky_s950c_m88ds3103_config,
|
|
&i2c_bus2->i2c_adap, &adapter);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
/* attach tuner */
|
|
memset(&ts2020_config, 0, sizeof(ts2020_config));
|
|
ts2020_config.fe = fe0->dvb.frontend;
|
|
ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &ts2020_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL || client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
|
|
/* delegate signal strength measurement to tuner */
|
|
fe0->dvb.frontend->ops.read_signal_strength =
|
|
fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
|
|
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
case CX23885_BOARD_DVBSKY_S952:
|
|
/* attach frontend */
|
|
memset(&m88ds3103_pdata, 0, sizeof(m88ds3103_pdata));
|
|
m88ds3103_pdata.clk = 27000000;
|
|
m88ds3103_pdata.i2c_wr_max = 33;
|
|
m88ds3103_pdata.agc = 0x99;
|
|
m88ds3103_pdata.clk_out = M88DS3103_CLOCK_OUT_DISABLED;
|
|
m88ds3103_pdata.lnb_en_pol = 1;
|
|
|
|
switch (port->nr) {
|
|
/* port b */
|
|
case 1:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
m88ds3103_pdata.ts_mode = M88DS3103_TS_PARALLEL;
|
|
m88ds3103_pdata.ts_clk = 16000;
|
|
m88ds3103_pdata.ts_clk_pol = 1;
|
|
p_set_voltage = dvbsky_t9580_set_voltage;
|
|
break;
|
|
/* port c */
|
|
case 2:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
m88ds3103_pdata.ts_mode = M88DS3103_TS_SERIAL;
|
|
m88ds3103_pdata.ts_clk = 96000;
|
|
m88ds3103_pdata.ts_clk_pol = 0;
|
|
p_set_voltage = dvbsky_s952_portc_set_voltage;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "m88ds3103", I2C_NAME_SIZE);
|
|
info.addr = 0x68;
|
|
info.platform_data = &m88ds3103_pdata;
|
|
request_module(info.type);
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (client_demod == NULL || client_demod->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
adapter = m88ds3103_pdata.get_i2c_adapter(client_demod);
|
|
fe0->dvb.frontend = m88ds3103_pdata.get_dvb_frontend(client_demod);
|
|
|
|
/* attach tuner */
|
|
memset(&ts2020_config, 0, sizeof(ts2020_config));
|
|
ts2020_config.fe = fe0->dvb.frontend;
|
|
ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &ts2020_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL || client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
|
|
/* delegate signal strength measurement to tuner */
|
|
fe0->dvb.frontend->ops.read_signal_strength =
|
|
fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
|
|
|
|
/*
|
|
* for setting the voltage we need to set GPIOs on
|
|
* the card.
|
|
*/
|
|
port->fe_set_voltage =
|
|
fe0->dvb.frontend->ops.set_voltage;
|
|
fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
|
|
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
case CX23885_BOARD_DVBSKY_T982:
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
switch (port->nr) {
|
|
/* port b */
|
|
case 1:
|
|
i2c_bus = &dev->i2c_bus[1];
|
|
si2168_config.ts_mode = SI2168_TS_PARALLEL;
|
|
break;
|
|
/* port c */
|
|
case 2:
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
|
break;
|
|
}
|
|
|
|
/* attach frontend */
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2168_config;
|
|
request_module(info.type);
|
|
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
|
if (client_demod == NULL || client_demod->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module(info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (client_tuner == NULL ||
|
|
client_tuner->dev.driver == NULL)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_HVR5525: {
|
|
struct m88rs6000t_config m88rs6000t_config;
|
|
struct a8293_platform_data a8293_pdata = {};
|
|
|
|
switch (port->nr) {
|
|
|
|
/* port b - satellite */
|
|
case 1:
|
|
/* attach frontend */
|
|
fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
|
|
&hauppauge_hvr5525_m88ds3103_config,
|
|
&dev->i2c_bus[0].i2c_adap, &adapter);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
/* attach SEC */
|
|
a8293_pdata.dvb_frontend = fe0->dvb.frontend;
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.type, "a8293", I2C_NAME_SIZE);
|
|
info.addr = 0x0b;
|
|
info.platform_data = &a8293_pdata;
|
|
request_module("a8293");
|
|
client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
|
if (!client_sec || !client_sec->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_sec->dev.driver->owner)) {
|
|
i2c_unregister_device(client_sec);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_sec = client_sec;
|
|
|
|
/* attach tuner */
|
|
memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));
|
|
m88rs6000t_config.fe = fe0->dvb.frontend;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE);
|
|
info.addr = 0x21;
|
|
info.platform_data = &m88rs6000t_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(adapter, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
|
|
/* delegate signal strength measurement to tuner */
|
|
fe0->dvb.frontend->ops.read_signal_strength =
|
|
fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
|
|
break;
|
|
/* port c - terrestrial/cable */
|
|
case 2:
|
|
/* attach frontend */
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2168_config;
|
|
request_module("%s", info.type);
|
|
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
|
if (!client_demod || !client_demod->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
|
switch (port->nr) {
|
|
/* port b - Terrestrial/cable */
|
|
case 1:
|
|
/* attach frontend */
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x64;
|
|
info.platform_data = &si2168_config;
|
|
request_module("%s", info.type);
|
|
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
|
if (!client_demod || !client_demod->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
|
|
/* port c - terrestrial/cable */
|
|
case 2:
|
|
/* attach frontend */
|
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
|
si2168_config.i2c_adapter = &adapter;
|
|
si2168_config.fe = &fe0->dvb.frontend;
|
|
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
|
info.addr = 0x66;
|
|
info.platform_data = &si2168_config;
|
|
request_module("%s", info.type);
|
|
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
|
if (!client_demod || !client_demod->dev.driver)
|
|
goto frontend_detach;
|
|
if (!try_module_get(client_demod->dev.driver->owner)) {
|
|
i2c_unregister_device(client_demod);
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_demod = client_demod;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x62;
|
|
info.platform_data = &si2157_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
}
|
|
break;
|
|
case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
|
|
switch (port->nr) {
|
|
/* port b - Terrestrial/cable */
|
|
case 1:
|
|
/* attach frontend */
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
|
|
&hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
si2157_config.inversion = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x60;
|
|
info.platform_data = &si2157_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
|
|
/* port c - terrestrial/cable */
|
|
case 2:
|
|
/* attach frontend */
|
|
i2c_bus = &dev->i2c_bus[0];
|
|
fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
|
|
&hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);
|
|
if (fe0->dvb.frontend == NULL)
|
|
break;
|
|
|
|
/* attach tuner */
|
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
|
si2157_config.fe = fe0->dvb.frontend;
|
|
si2157_config.if_port = 1;
|
|
si2157_config.inversion = 1;
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
|
info.addr = 0x62;
|
|
info.platform_data = &si2157_config;
|
|
request_module("%s", info.type);
|
|
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
|
if (!client_tuner || !client_tuner->dev.driver) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
|
i2c_unregister_device(client_tuner);
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
goto frontend_detach;
|
|
}
|
|
port->i2c_client_tuner = client_tuner;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
pr_info("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
|
|
if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
|
|
pr_err("%s: frontend initialization failed\n",
|
|
dev->name);
|
|
goto frontend_detach;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
fe0->dvb.frontend->callback = cx23885_tuner_callback;
|
|
if (fe1)
|
|
fe1->dvb.frontend->callback = cx23885_tuner_callback;
|
|
#if 0
|
|
/* Ensure all frontends negotiate bus access */
|
|
fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
|
|
if (fe1)
|
|
fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
|
|
#endif
|
|
|
|
/* Put the analog decoder in standby to keep it quiet */
|
|
call_all(dev, core, s_power, 0);
|
|
|
|
if (fe0->dvb.frontend->ops.analog_ops.standby)
|
|
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
|
|
|
|
/* register everything */
|
|
ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port,
|
|
&dev->pci->dev, NULL,
|
|
adapter_nr, mfe_shared);
|
|
if (ret)
|
|
goto frontend_detach;
|
|
|
|
ret = dvb_register_ci_mac(port);
|
|
if (ret)
|
|
goto frontend_detach;
|
|
|
|
return 0;
|
|
|
|
frontend_detach:
|
|
/* remove I2C client for SEC */
|
|
client_sec = port->i2c_client_sec;
|
|
if (client_sec) {
|
|
module_put(client_sec->dev.driver->owner);
|
|
i2c_unregister_device(client_sec);
|
|
port->i2c_client_sec = NULL;
|
|
}
|
|
|
|
/* remove I2C client for tuner */
|
|
client_tuner = port->i2c_client_tuner;
|
|
if (client_tuner) {
|
|
module_put(client_tuner->dev.driver->owner);
|
|
i2c_unregister_device(client_tuner);
|
|
port->i2c_client_tuner = NULL;
|
|
}
|
|
|
|
/* remove I2C client for demodulator */
|
|
client_demod = port->i2c_client_demod;
|
|
if (client_demod) {
|
|
module_put(client_demod->dev.driver->owner);
|
|
i2c_unregister_device(client_demod);
|
|
port->i2c_client_demod = NULL;
|
|
}
|
|
|
|
port->gate_ctrl = NULL;
|
|
vb2_dvb_dealloc_frontends(&port->frontends);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int cx23885_dvb_register(struct cx23885_tsport *port)
|
|
{
|
|
|
|
struct vb2_dvb_frontend *fe0;
|
|
struct cx23885_dev *dev = port->dev;
|
|
int err, i;
|
|
|
|
/* Here we need to allocate the correct number of frontends,
|
|
* as reflected in the cards struct. The reality is that currently
|
|
* no cx23885 boards support this - yet. But, if we don't modify this
|
|
* code then the second frontend would never be allocated (later)
|
|
* and fail with error before the attach in dvb_register().
|
|
* Without these changes we risk an OOPS later. The changes here
|
|
* are for safety, and should provide a good foundation for the
|
|
* future addition of any multi-frontend cx23885 based boards.
|
|
*/
|
|
pr_info("%s() allocating %d frontend(s)\n", __func__,
|
|
port->num_frontends);
|
|
|
|
for (i = 1; i <= port->num_frontends; i++) {
|
|
struct vb2_queue *q;
|
|
|
|
if (vb2_dvb_alloc_frontend(
|
|
&port->frontends, i) == NULL) {
|
|
pr_err("%s() failed to alloc\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
fe0 = vb2_dvb_get_frontend(&port->frontends, i);
|
|
if (!fe0)
|
|
return -EINVAL;
|
|
|
|
dprintk(1, "%s\n", __func__);
|
|
dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
|
|
dev->board,
|
|
dev->name,
|
|
dev->pci_bus,
|
|
dev->pci_slot);
|
|
|
|
err = -ENODEV;
|
|
|
|
/* dvb stuff */
|
|
/* We have to init the queue for each frontend on a port. */
|
|
pr_info("%s: cx23885 based dvb card\n", dev->name);
|
|
q = &fe0->dvb.dvbq;
|
|
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
|
|
q->gfp_flags = GFP_DMA32;
|
|
q->min_buffers_needed = 2;
|
|
q->drv_priv = port;
|
|
q->buf_struct_size = sizeof(struct cx23885_buffer);
|
|
q->ops = &dvb_qops;
|
|
q->mem_ops = &vb2_dma_sg_memops;
|
|
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
q->lock = &dev->lock;
|
|
q->dev = &dev->pci->dev;
|
|
|
|
err = vb2_queue_init(q);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
err = dvb_register(port);
|
|
if (err != 0)
|
|
pr_err("%s() dvb_register failed err = %d\n",
|
|
__func__, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
int cx23885_dvb_unregister(struct cx23885_tsport *port)
|
|
{
|
|
struct vb2_dvb_frontend *fe0;
|
|
struct i2c_client *client;
|
|
|
|
fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
|
|
|
|
if (fe0 && fe0->dvb.frontend)
|
|
vb2_dvb_unregister_bus(&port->frontends);
|
|
|
|
/* remove I2C client for CI */
|
|
client = port->i2c_client_ci;
|
|
if (client) {
|
|
module_put(client->dev.driver->owner);
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
/* remove I2C client for SEC */
|
|
client = port->i2c_client_sec;
|
|
if (client) {
|
|
module_put(client->dev.driver->owner);
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
/* remove I2C client for tuner */
|
|
client = port->i2c_client_tuner;
|
|
if (client) {
|
|
module_put(client->dev.driver->owner);
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
/* remove I2C client for demodulator */
|
|
client = port->i2c_client_demod;
|
|
if (client) {
|
|
module_put(client->dev.driver->owner);
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
switch (port->dev->board) {
|
|
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
|
|
netup_ci_exit(port);
|
|
break;
|
|
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
|
|
altera_ci_release(port->dev, port->nr);
|
|
break;
|
|
}
|
|
|
|
port->gate_ctrl = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|