You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
kernel_samsung_sm7125/arch/arm64/boot/dts/qcom/sm8150-rumi.dtsi

163 lines
3.4 KiB

/* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm-audio-lpass.dtsi"
#include "sm8150-sde-display.dtsi"
&soc {
#address-cells = <1>;
#size-cells = <1>;
usb_emu_phy: usb_emu_phy@a720000 {
compatible = "qcom,usb-emu-phy";
reg = <0x0a720000 0x9500>,
<0x0a6f8800 0x100>;
reg-names = "base", "qcratch_base";
qcom,emu-init-seq = <0xfff0 0x4
0xfff3 0x4
0x40 0x4
0xfff3 0x4
0xfff0 0x4
0x100000 0x20
0x0 0x20
0x1a0 0x20
0x100000 0x3c
0x0 0x3c
0x10060 0x3c
0x0 0x4>;
};
timer {
clock-frequency = <95000>;
};
timer@0x17c00000 {
clock-frequency = <95000>;
};
qcom,icnss@18800000 {
compatible = "qcom,icnss";
reg = <0x18800000 0x800000>;
reg-names = "membase";
interrupts = <0 414 0 /* CE0 */ >,
<0 415 0 /* CE1 */ >,
<0 416 0 /* CE2 */ >,
<0 417 0 /* CE3 */ >,
<0 418 0 /* CE4 */ >,
<0 419 0 /* CE5 */ >,
<0 420 0 /* CE6 */ >,
<0 421 0 /* CE7 */ >,
<0 422 0 /* CE8 */ >,
<0 423 0 /* CE9 */ >,
<0 424 0 /* CE10 */ >,
<0 425 0 /* CE11 */ >;
qcom,wlan-msa-memory = <0x100000>;
};
wdog: qcom,wdt@17c10000{
status = "disabled";
};
};
&audio_apr {
sound-stub {
compatible = "qcom,sm8150-asoc-snd-stub";
qcom,model = "sm8150-stub-snd-card";
qcom,audio-routing =
"AIF4 VI", "MCLK";
asoc-platform = <&pcm0>, <&routing>;
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-routing";
asoc-cpu = <&sb_0_rx>, <&sb_0_tx>;
asoc-cpu-names = "msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385";
asoc-codec = <&stub_codec>;
asoc-codec-names = "msm-stub-codec.1";
qcom,wsa-max-devs = <0>;
};
};
#include "sm8150-pmic-overlay.dtsi"
&VDD_MMCX_LEVEL {
regulator-always-on;
};
&qupv3_se12_2uart {
status = "ok";
};
&usb0 {
extcon = <0>, <0>, <0>;
dwc3@a600000 {
usb-phy = <&usb_emu_phy>, <&usb_nop_phy>;
maximum-speed = "high-speed";
};
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qrbtc-sdm845";
vdda-phy-supply = <&pm8150_l5>;
vdda-pll-supply = <&pm8150_l3>;
vdda-phy-max-microamp = <87100>;
vdda-pll-max-microamp = <18800>;
status = "ok";
};
&ufshc_mem {
limit-tx-hs-gear = <1>;
limit-rx-hs-gear = <1>;
vdd-hba-supply = <&ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8150_l10>;
vccq2-supply = <&pm8150_s4>;
vcc-max-microamp = <750000>;
vccq2-max-microamp = <750000>;
qcom,vddp-ref-clk-supply = <&pm8150_l9>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,disable-lpm;
rpm-level = <0>;
spm-level = <0>;
status = "ok";
};
&dsi_sim_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_sim_cmd_display {
qcom,dsi-display-active;
};
&slim_qca {
status = "disabled";
};
&usb_qmp_dp_phy {
status = "disabled";
};
&usb2_phy0 {
status = "disabled";
};
&ipa_hw {
qcom,ipa-hw-mode = <1>; /* IPA hw type = Virtual */
};