You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
428 lines
11 KiB
428 lines
11 KiB
/*
|
|
* Copyright (c) 2017, 2019-2020 The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
&soc {
|
|
led_flash0: qcom,camera-flash@0 {
|
|
cell-index = <0>;
|
|
compatible = "qcom,camera-flash";
|
|
qcom,flash-source = <&pm660l_flash0 &pm660l_flash1>;
|
|
qcom,torch-source = <&pm660l_torch0 &pm660l_torch1>;
|
|
qcom,switch-source = <&pm660l_switch0>;
|
|
status = "ok";
|
|
};
|
|
|
|
cam_avdd_gpio_regulator:cam_avdd_fixed_regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vadd_gpio_regulator";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 51 0>;
|
|
vin-supply = <&pm660l_bob>;
|
|
};
|
|
|
|
cam_vaf_gpio_regulator:cam_vaf_fixed_regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_vaf_gpio_regulator";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
enable-active-high;
|
|
gpio = <&tlmm 50 0>;
|
|
vin-supply = <&pm660l_bob>;
|
|
};
|
|
|
|
cam_rear_dvdd_gpio_regulator: cam_rear_dvdd_fixed_regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "cam_rear_dvdd_gpio_regulator";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
enable-active-high;
|
|
gpio = <&pm660l_gpios 4 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_sensor_eldo4_default>;
|
|
vin-supply = <&pm660_s5>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
cam_sensor_rear_active: cam_sensor_rear_active {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio46";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio46";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_rear_suspend: cam_sensor_rear_suspend {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio46";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio46";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_rear2_active: cam_sensor_rear2_active {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_rear2_suspend: cam_sensor_rear2_suspend {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front_active: cam_sensor_front_active {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio47";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio47";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front_suspend: cam_sensor_front_suspend {
|
|
/* RESET */
|
|
mux {
|
|
pins = "gpio47";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio47";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
&cci {
|
|
actuator0: qcom,actuator@0 {
|
|
cell-index = <0>;
|
|
reg = <0x0>;
|
|
compatible = "qcom,actuator";
|
|
qcom,cci-master = <0>;
|
|
cam_vaf-supply = <&cam_vaf_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vaf";
|
|
qcom,cam-vreg-min-voltage = <2800000>;
|
|
qcom,cam-vreg-max-voltage = <2800000>;
|
|
qcom,cam-vreg-op-mode = <0>;
|
|
};
|
|
|
|
actuator1: qcom,actuator@1 {
|
|
cell-index = <1>;
|
|
reg = <0x1>;
|
|
compatible = "qcom,actuator";
|
|
qcom,cci-master = <1>;
|
|
cam_vaf-supply = <&cam_vaf_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vaf";
|
|
qcom,cam-vreg-min-voltage = <2800000>;
|
|
qcom,cam-vreg-max-voltage = <2800000>;
|
|
qcom,cam-vreg-op-mode = <0>;
|
|
};
|
|
|
|
ois0: qcom,ois@0 {
|
|
cell-index = <0>;
|
|
reg = <0x0>;
|
|
compatible = "qcom,ois";
|
|
qcom,cci-master = <0>;
|
|
cam_vaf-supply = <&cam_vaf_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vaf";
|
|
qcom,cam-vreg-min-voltage = <2800000>;
|
|
qcom,cam-vreg-max-voltage = <2800000>;
|
|
qcom,cam-vreg-op-mode = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eeprom0: qcom,eeprom@0 {
|
|
cell-index = <0>;
|
|
reg = <0>;
|
|
compatible = "qcom,eeprom";
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&cam_rear_dvdd_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 0>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 0>;
|
|
qcom,cam-vreg-op-mode = <105000 0 105000>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk0_active
|
|
&cam_sensor_rear_active>;
|
|
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
|
&cam_sensor_rear_suspend>;
|
|
gpios = <&tlmm 32 0>,
|
|
<&tlmm 46 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-req-tbl-num = <0 1>;
|
|
qcom,gpio-req-tbl-flags = <1 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
|
"CAM_RESET0";
|
|
qcom,sensor-position = <0>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <0>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK0_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
|
|
eeprom1: qcom,eeprom@1 {
|
|
cell-index = <1>;
|
|
reg = <0x1>;
|
|
compatible = "qcom,eeprom";
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&cam_rear_dvdd_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 0>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 0>;
|
|
qcom,cam-vreg-op-mode = <105000 0 0>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk2_active
|
|
&cam_sensor_rear2_active>;
|
|
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
|
&cam_sensor_rear2_suspend>;
|
|
gpios = <&tlmm 34 0>,
|
|
<&tlmm 48 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-req-tbl-num = <0 1>;
|
|
qcom,gpio-req-tbl-flags = <1 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
|
|
"CAM_RESET1";
|
|
qcom,sensor-position = <0>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <1>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK2_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
|
|
eeprom2: qcom,eeprom@2 {
|
|
cell-index = <2>;
|
|
reg = <0x2>;
|
|
compatible = "qcom,eeprom";
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&pm660_s5>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 1352000>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 1352000>;
|
|
qcom,cam-vreg-op-mode = <105000 0 105000>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk1_active
|
|
&cam_sensor_front_active
|
|
&cam_sensor_eldo3_default>;
|
|
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
|
&cam_sensor_front_suspend>;
|
|
gpios = <&tlmm 33 0>,
|
|
<&tlmm 47 0>,
|
|
<&pm660l_gpios 3 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-vdig = <2>;
|
|
qcom,gpio-req-tbl-num = <0 1 2>;
|
|
qcom,gpio-req-tbl-flags = <1 0 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
|
"CAM_RESET2",
|
|
"CAM_VDIG";
|
|
qcom,sensor-position = <1>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <1>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK1_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
|
|
qcom,camera@0 {
|
|
cell-index = <0>;
|
|
compatible = "qcom,camera";
|
|
reg = <0x0>;
|
|
qcom,csiphy-sd-index = <0>;
|
|
qcom,csid-sd-index = <0>;
|
|
qcom,mount-angle = <270>;
|
|
qcom,led-flash-src = <&led_flash0>;
|
|
qcom,actuator-src = <&actuator0>;
|
|
qcom,ois-src = <&ois0>;
|
|
qcom,eeprom-src = <&eeprom0>;
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&cam_rear_dvdd_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 0>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 0>;
|
|
qcom,cam-vreg-op-mode = <105000 0 0>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk0_active
|
|
&cam_sensor_rear_active>;
|
|
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
|
&cam_sensor_rear_suspend>;
|
|
gpios = <&tlmm 32 0>,
|
|
<&tlmm 46 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-req-tbl-num = <0 1>;
|
|
qcom,gpio-req-tbl-flags = <1 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
|
"CAM_RESET0";
|
|
qcom,sensor-position = <0>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <0>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK0_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
|
|
qcom,camera@1 {
|
|
cell-index = <1>;
|
|
compatible = "qcom,camera";
|
|
reg = <0x1>;
|
|
qcom,csiphy-sd-index = <1>;
|
|
qcom,csid-sd-index = <1>;
|
|
qcom,mount-angle = <270>;
|
|
qcom,led-flash-src = <&led_flash0>;
|
|
qcom,actuator-src = <&actuator1>;
|
|
qcom,eeprom-src = <&eeprom1>;
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&cam_rear_dvdd_gpio_regulator>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 0>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 0>;
|
|
qcom,cam-vreg-op-mode = <105000 0 0>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk2_active
|
|
&cam_sensor_rear2_active>;
|
|
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
|
&cam_sensor_rear2_suspend>;
|
|
gpios = <&tlmm 34 0>,
|
|
<&tlmm 48 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-req-tbl-num = <0 1>;
|
|
qcom,gpio-req-tbl-flags = <1 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
|
|
"CAM_RESET1";
|
|
qcom,sensor-position = <0>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <1>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK2_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
|
|
qcom,camera@2 {
|
|
cell-index = <2>;
|
|
compatible = "qcom,camera";
|
|
reg = <0x02>;
|
|
qcom,csiphy-sd-index = <2>;
|
|
qcom,csid-sd-index = <2>;
|
|
qcom,mount-angle = <270>;
|
|
qcom,eeprom-src = <&eeprom2>;
|
|
cam_vio-supply = <&pm660_l11>;
|
|
cam_vana-supply = <&cam_avdd_gpio_regulator>;
|
|
cam_vdig-supply = <&pm660_s5>;
|
|
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
|
qcom,cam-vreg-min-voltage = <1780000 0 1350000>;
|
|
qcom,cam-vreg-max-voltage = <1950000 0 1350000>;
|
|
qcom,cam-vreg-op-mode = <105000 0 105000>;
|
|
qcom,gpio-no-mux = <0>;
|
|
pinctrl-names = "cam_default", "cam_suspend";
|
|
pinctrl-0 = <&cam_sensor_mclk1_active
|
|
&cam_sensor_front_active
|
|
&cam_sensor_eldo3_default>;
|
|
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
|
&cam_sensor_front_suspend>;
|
|
gpios = <&tlmm 33 0>,
|
|
<&tlmm 47 0>,
|
|
<&pm660l_gpios 3 0>;
|
|
qcom,gpio-reset = <1>;
|
|
qcom,gpio-vdig = <2>;
|
|
qcom,gpio-req-tbl-num = <0 1 2>;
|
|
qcom,gpio-req-tbl-flags = <1 0 0>;
|
|
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
|
"CAM_RESET2",
|
|
"CAM_VDIG";
|
|
qcom,sensor-position = <1>;
|
|
qcom,sensor-mode = <0>;
|
|
qcom,cci-master = <1>;
|
|
status = "ok";
|
|
clocks = <&clock_mmss MCLK1_CLK_SRC>,
|
|
<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;
|
|
clock-names = "cam_src_clk", "cam_clk";
|
|
qcom,clock-rates = <24000000 0>;
|
|
};
|
|
};
|
|
|
|
&pm660l_gpios {
|
|
cam_sensor_eldo3 {
|
|
cam_sensor_eldo3_default: cam_sensor_eldo3_default {
|
|
pins = "gpio3";
|
|
function = "normal";
|
|
output-high;
|
|
bias-disable;
|
|
};
|
|
};
|
|
cam_sensor_eldo4 {
|
|
cam_sensor_eldo4_default: cam_sensor_eldo4_default {
|
|
pins = "gpio4";
|
|
function = "normal";
|
|
output-low;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|