You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
518 lines
12 KiB
518 lines
12 KiB
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Goramo MultiLink router platform code
|
|
* Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/hdlc.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
|
|
#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
|
|
#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
|
|
#define SLOT_NEC 0x0E /* IDSEL = AD18 */
|
|
|
|
/* GPIO lines */
|
|
#define GPIO_SCL 0
|
|
#define GPIO_SDA 1
|
|
#define GPIO_STR 2
|
|
#define GPIO_IRQ_NEC 3
|
|
#define GPIO_IRQ_ETHA 4
|
|
#define GPIO_IRQ_ETHB 5
|
|
#define GPIO_HSS0_DCD_N 6
|
|
#define GPIO_HSS1_DCD_N 7
|
|
#define GPIO_UART0_DCD 8
|
|
#define GPIO_UART1_DCD 9
|
|
#define GPIO_HSS0_CTS_N 10
|
|
#define GPIO_HSS1_CTS_N 11
|
|
#define GPIO_IRQ_MPCI 12
|
|
#define GPIO_HSS1_RTS_N 13
|
|
#define GPIO_HSS0_RTS_N 14
|
|
/* GPIO15 is not connected */
|
|
|
|
/* Control outputs from 74HC4094 */
|
|
#define CONTROL_HSS0_CLK_INT 0
|
|
#define CONTROL_HSS1_CLK_INT 1
|
|
#define CONTROL_HSS0_DTR_N 2
|
|
#define CONTROL_HSS1_DTR_N 3
|
|
#define CONTROL_EXT 4
|
|
#define CONTROL_AUTO_RESET 5
|
|
#define CONTROL_PCI_RESET_N 6
|
|
#define CONTROL_EEPROM_WC_N 7
|
|
|
|
/* offsets from start of flash ROM = 0x50000000 */
|
|
#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
|
|
#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
|
|
#define CFG_REV 0x4C /* u32 */
|
|
#define CFG_SDRAM_SIZE 0x50 /* u32 */
|
|
#define CFG_SDRAM_CONF 0x54 /* u32 */
|
|
#define CFG_SDRAM_MODE 0x58 /* u32 */
|
|
#define CFG_SDRAM_REFRESH 0x5C /* u32 */
|
|
|
|
#define CFG_HW_BITS 0x60 /* u32 */
|
|
#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
|
|
#define CFG_HW_HAS_PCI_SLOT 0x00000008
|
|
#define CFG_HW_HAS_ETH0 0x00000010
|
|
#define CFG_HW_HAS_ETH1 0x00000020
|
|
#define CFG_HW_HAS_HSS0 0x00000040
|
|
#define CFG_HW_HAS_HSS1 0x00000080
|
|
#define CFG_HW_HAS_UART0 0x00000100
|
|
#define CFG_HW_HAS_UART1 0x00000200
|
|
#define CFG_HW_HAS_EEPROM 0x00000400
|
|
|
|
#define FLASH_CMD_READ_ARRAY 0xFF
|
|
#define FLASH_CMD_READ_ID 0x90
|
|
#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
|
|
|
|
static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
|
|
static u8 control_value;
|
|
|
|
static void set_scl(u8 value)
|
|
{
|
|
gpio_set_value(GPIO_SCL, !!value);
|
|
udelay(3);
|
|
}
|
|
|
|
static void set_sda(u8 value)
|
|
{
|
|
gpio_set_value(GPIO_SDA, !!value);
|
|
udelay(3);
|
|
}
|
|
|
|
static void set_str(u8 value)
|
|
{
|
|
gpio_set_value(GPIO_STR, !!value);
|
|
udelay(3);
|
|
}
|
|
|
|
static inline void set_control(int line, int value)
|
|
{
|
|
if (value)
|
|
control_value |= (1 << line);
|
|
else
|
|
control_value &= ~(1 << line);
|
|
}
|
|
|
|
|
|
static void output_control(void)
|
|
{
|
|
int i;
|
|
|
|
gpio_direction_output(GPIO_SCL, 1);
|
|
gpio_direction_output(GPIO_SDA, 1);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
set_scl(0);
|
|
set_sda(control_value & (0x80 >> i)); /* MSB first */
|
|
set_scl(1); /* active edge */
|
|
}
|
|
|
|
set_str(1);
|
|
set_str(0);
|
|
|
|
set_scl(0);
|
|
set_sda(1); /* Be ready for START */
|
|
set_scl(1);
|
|
}
|
|
|
|
|
|
static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
|
|
|
|
static int hss_set_clock(int port, unsigned int clock_type)
|
|
{
|
|
int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
|
|
|
|
switch (clock_type) {
|
|
case CLOCK_DEFAULT:
|
|
case CLOCK_EXT:
|
|
set_control(ctrl_int, 0);
|
|
output_control();
|
|
return CLOCK_EXT;
|
|
|
|
case CLOCK_INT:
|
|
set_control(ctrl_int, 1);
|
|
output_control();
|
|
return CLOCK_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t hss_dcd_irq(int irq, void *pdev)
|
|
{
|
|
int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
|
|
int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
|
|
set_carrier_cb_tab[port](pdev, !i);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
static int hss_open(int port, void *pdev,
|
|
void (*set_carrier_cb)(void *pdev, int carrier))
|
|
{
|
|
int i, irq;
|
|
|
|
if (!port)
|
|
irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
|
|
else
|
|
irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
|
|
|
|
i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
|
|
set_carrier_cb(pdev, !i);
|
|
|
|
set_carrier_cb_tab[!!port] = set_carrier_cb;
|
|
|
|
if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
|
|
printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
|
|
irq, i);
|
|
return i;
|
|
}
|
|
|
|
set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
|
|
output_control();
|
|
gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void hss_close(int port, void *pdev)
|
|
{
|
|
free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
|
|
IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
|
|
set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
|
|
|
|
set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
|
|
output_control();
|
|
gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
|
|
}
|
|
|
|
|
|
/* Flash memory */
|
|
static struct flash_platform_data flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device device_flash = {
|
|
.name = "IXP4XX-Flash",
|
|
.id = 0,
|
|
.dev = { .platform_data = &flash_data },
|
|
.num_resources = 1,
|
|
.resource = &flash_resource,
|
|
};
|
|
|
|
|
|
/* I^2C interface */
|
|
static struct i2c_gpio_platform_data i2c_data = {
|
|
.sda_pin = GPIO_SDA,
|
|
.scl_pin = GPIO_SCL,
|
|
};
|
|
|
|
static struct platform_device device_i2c = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = { .platform_data = &i2c_data },
|
|
};
|
|
|
|
|
|
/* IXP425 2 UART ports */
|
|
static struct resource uart_resources[] = {
|
|
{
|
|
.start = IXP4XX_UART1_BASE_PHYS,
|
|
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IXP4XX_UART2_BASE_PHYS,
|
|
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct plat_serial8250_port uart_data[] = {
|
|
{
|
|
.mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
.membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
|
|
REG_OFFSET,
|
|
.irq = IRQ_IXP4XX_UART1,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP4XX_UART_XTAL,
|
|
},
|
|
{
|
|
.mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
.membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
|
|
REG_OFFSET,
|
|
.irq = IRQ_IXP4XX_UART2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP4XX_UART_XTAL,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device device_uarts = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev.platform_data = uart_data,
|
|
.num_resources = 2,
|
|
.resource = uart_resources,
|
|
};
|
|
|
|
|
|
/* Built-in 10/100 Ethernet MAC interfaces */
|
|
static struct eth_plat_info eth_plat[] = {
|
|
{
|
|
.phy = 0,
|
|
.rxq = 3,
|
|
.txreadyq = 32,
|
|
}, {
|
|
.phy = 1,
|
|
.rxq = 4,
|
|
.txreadyq = 33,
|
|
}
|
|
};
|
|
|
|
static struct platform_device device_eth_tab[] = {
|
|
{
|
|
.name = "ixp4xx_eth",
|
|
.id = IXP4XX_ETH_NPEB,
|
|
.dev.platform_data = eth_plat,
|
|
}, {
|
|
.name = "ixp4xx_eth",
|
|
.id = IXP4XX_ETH_NPEC,
|
|
.dev.platform_data = eth_plat + 1,
|
|
}
|
|
};
|
|
|
|
|
|
/* IXP425 2 synchronous serial ports */
|
|
static struct hss_plat_info hss_plat[] = {
|
|
{
|
|
.set_clock = hss_set_clock,
|
|
.open = hss_open,
|
|
.close = hss_close,
|
|
.txreadyq = 34,
|
|
}, {
|
|
.set_clock = hss_set_clock,
|
|
.open = hss_open,
|
|
.close = hss_close,
|
|
.txreadyq = 35,
|
|
}
|
|
};
|
|
|
|
static struct platform_device device_hss_tab[] = {
|
|
{
|
|
.name = "ixp4xx_hss",
|
|
.id = 0,
|
|
.dev.platform_data = hss_plat,
|
|
}, {
|
|
.name = "ixp4xx_hss",
|
|
.id = 1,
|
|
.dev.platform_data = hss_plat + 1,
|
|
}
|
|
};
|
|
|
|
|
|
static struct platform_device *device_tab[7] __initdata = {
|
|
&device_flash, /* index 0 */
|
|
};
|
|
|
|
static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
|
|
{
|
|
#ifdef __ARMEB__
|
|
return __raw_readb(flash + addr);
|
|
#else
|
|
return __raw_readb(flash + (addr ^ 3));
|
|
#endif
|
|
}
|
|
|
|
static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
|
|
{
|
|
#ifdef __ARMEB__
|
|
return __raw_readw(flash + addr);
|
|
#else
|
|
return __raw_readw(flash + (addr ^ 2));
|
|
#endif
|
|
}
|
|
|
|
static void __init gmlr_init(void)
|
|
{
|
|
u8 __iomem *flash;
|
|
int i, devices = 1; /* flash */
|
|
|
|
ixp4xx_sys_init();
|
|
|
|
if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
|
|
printk(KERN_ERR "goramo-mlr: unable to access system"
|
|
" configuration data\n");
|
|
else {
|
|
system_rev = __raw_readl(flash + CFG_REV);
|
|
hw_bits = __raw_readl(flash + CFG_HW_BITS);
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
eth_plat[0].hwaddr[i] =
|
|
flash_readb(flash, CFG_ETH0_ADDRESS + i);
|
|
eth_plat[1].hwaddr[i] =
|
|
flash_readb(flash, CFG_ETH1_ADDRESS + i);
|
|
}
|
|
|
|
__raw_writew(FLASH_CMD_READ_ID, flash);
|
|
system_serial_high = flash_readw(flash, FLASH_SER_OFF);
|
|
system_serial_high <<= 16;
|
|
system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
|
|
system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
|
|
system_serial_low <<= 16;
|
|
system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
|
|
__raw_writew(FLASH_CMD_READ_ARRAY, flash);
|
|
|
|
iounmap(flash);
|
|
}
|
|
|
|
switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
|
|
case CFG_HW_HAS_UART0:
|
|
memset(&uart_data[1], 0, sizeof(uart_data[1]));
|
|
device_uarts.num_resources = 1;
|
|
break;
|
|
|
|
case CFG_HW_HAS_UART1:
|
|
device_uarts.dev.platform_data = &uart_data[1];
|
|
device_uarts.resource = &uart_resources[1];
|
|
device_uarts.num_resources = 1;
|
|
break;
|
|
}
|
|
if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
|
|
device_tab[devices++] = &device_uarts; /* max index 1 */
|
|
|
|
if (hw_bits & CFG_HW_HAS_ETH0)
|
|
device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
|
|
if (hw_bits & CFG_HW_HAS_ETH1)
|
|
device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
|
|
|
|
if (hw_bits & CFG_HW_HAS_HSS0)
|
|
device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
|
|
if (hw_bits & CFG_HW_HAS_HSS1)
|
|
device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
|
|
|
|
if (hw_bits & CFG_HW_HAS_EEPROM)
|
|
device_tab[devices++] = &device_i2c; /* max index 6 */
|
|
|
|
gpio_request(GPIO_SCL, "SCL/clock");
|
|
gpio_request(GPIO_SDA, "SDA/data");
|
|
gpio_request(GPIO_STR, "strobe");
|
|
gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
|
|
gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
|
|
gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
|
|
gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
|
|
|
|
gpio_direction_output(GPIO_SCL, 1);
|
|
gpio_direction_output(GPIO_SDA, 1);
|
|
gpio_direction_output(GPIO_STR, 0);
|
|
gpio_direction_output(GPIO_HSS0_RTS_N, 1);
|
|
gpio_direction_output(GPIO_HSS1_RTS_N, 1);
|
|
gpio_direction_input(GPIO_HSS0_DCD_N);
|
|
gpio_direction_input(GPIO_HSS1_DCD_N);
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
|
|
|
|
set_control(CONTROL_HSS0_DTR_N, 1);
|
|
set_control(CONTROL_HSS1_DTR_N, 1);
|
|
set_control(CONTROL_EEPROM_WC_N, 1);
|
|
set_control(CONTROL_PCI_RESET_N, 1);
|
|
output_control();
|
|
|
|
msleep(1); /* Wait for PCI devices to initialize */
|
|
|
|
flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
|
|
|
platform_add_devices(device_tab, devices);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PCI
|
|
static void __init gmlr_pci_preinit(void)
|
|
{
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
|
|
ixp4xx_pci_preinit();
|
|
}
|
|
|
|
static void __init gmlr_pci_postinit(void)
|
|
{
|
|
if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
|
|
(hw_bits & CFG_HW_USB_PORTS) < 5) {
|
|
/* need to adjust number of USB ports on NEC chip */
|
|
u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
|
|
if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
|
|
value &= ~7;
|
|
value |= (hw_bits & CFG_HW_USB_PORTS);
|
|
ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
switch(slot) {
|
|
case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
|
|
case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
|
|
case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
|
|
default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
|
|
}
|
|
}
|
|
|
|
static struct hw_pci gmlr_hw_pci __initdata = {
|
|
.nr_controllers = 1,
|
|
.ops = &ixp4xx_ops,
|
|
.preinit = gmlr_pci_preinit,
|
|
.postinit = gmlr_pci_postinit,
|
|
.setup = ixp4xx_setup,
|
|
.map_irq = gmlr_map_irq,
|
|
};
|
|
|
|
static int __init gmlr_pci_init(void)
|
|
{
|
|
if (machine_is_goramo_mlr() &&
|
|
(hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
|
|
pci_common_init(&gmlr_hw_pci);
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(gmlr_pci_init);
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
MACHINE_START(GORAMO_MLR, "MultiLink")
|
|
/* Maintainer: Krzysztof Halasa */
|
|
.map_io = ixp4xx_map_io,
|
|
.init_early = ixp4xx_init_early,
|
|
.init_irq = ixp4xx_init_irq,
|
|
.init_time = ixp4xx_timer_init,
|
|
.atag_offset = 0x100,
|
|
.init_machine = gmlr_init,
|
|
#if defined(CONFIG_PCI)
|
|
.dma_zone_size = SZ_64M,
|
|
#endif
|
|
.restart = ixp4xx_restart,
|
|
MACHINE_END
|
|
|