You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
53 lines
2.0 KiB
53 lines
2.0 KiB
MPIC interrupt controller
|
|
=========================
|
|
|
|
Device types supported:
|
|
KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0
|
|
KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2
|
|
|
|
Only one MPIC instance, of any type, may be instantiated. The created
|
|
MPIC will act as the system interrupt controller, connecting to each
|
|
vcpu's interrupt inputs.
|
|
|
|
Groups:
|
|
KVM_DEV_MPIC_GRP_MISC
|
|
Attributes:
|
|
KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit)
|
|
Base address of the 256 KiB MPIC register space. Must be
|
|
naturally aligned. A value of zero disables the mapping.
|
|
Reset value is zero.
|
|
|
|
KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit)
|
|
Access an MPIC register, as if the access were made from the guest.
|
|
"attr" is the byte offset into the MPIC register space. Accesses
|
|
must be 4-byte aligned.
|
|
|
|
MSIs may be signaled by using this attribute group to write
|
|
to the relevant MSIIR.
|
|
|
|
KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit)
|
|
IRQ input line for each standard openpic source. 0 is inactive and 1
|
|
is active, regardless of interrupt sense.
|
|
|
|
For edge-triggered interrupts: Writing 1 is considered an activating
|
|
edge, and writing 0 is ignored. Reading returns 1 if a previously
|
|
signaled edge has not been acknowledged, and 0 otherwise.
|
|
|
|
"attr" is the IRQ number. IRQ numbers for standard sources are the
|
|
byte offset of the relevant IVPR from EIVPR0, divided by 32.
|
|
|
|
IRQ Routing:
|
|
|
|
The MPIC emulation supports IRQ routing. Only a single MPIC device can
|
|
be instantiated. Once that device has been created, it's available as
|
|
irqchip id 0.
|
|
|
|
This irqchip 0 has 256 interrupt pins, which expose the interrupts in
|
|
the main array of interrupt sources (a.k.a. "SRC" interrupts).
|
|
|
|
The numbering is the same as the MPIC device tree binding -- based on
|
|
the register offset from the beginning of the sources array, without
|
|
regard to any subdivisions in chip documentation such as "internal"
|
|
or "external" interrupts.
|
|
|
|
Access to non-SRC interrupts is not implemented through IRQ routing mechanisms.
|
|
|