# When adding new entries keep the list in alphabetical order

comment "Samsung Debugging Feature"
menuconfig SEC_DEBUG
	tristate "Samsung TN Ramdump Feature"
	default n
	help
	  Samsung TN Ramdump Feature.
	  Enables collection of ram dump.
	  Enables task history, debug level etc.
	  This feature is enabled in defconfig.

if SEC_DEBUG

config SEC_LOG_BUF
	bool "Samsung non-cached kernel printk"
	default y
	help
	  Samsung non-cached kernel printk
	  This ensures that printk is never stale
	  which is a good feature when debugging without
	  hardware debuggers. If unsure, keep it turned on.

if SEC_LOG_BUF
choice
	bool "Select sec_log_buf type"

config SEC_LOG_BUF_NO_CONSOLE
	bool "Direct copying form __log_buf"
	help
	  Kernel log will be copied directly from __log_buf.

config SEC_LOG_BUF_CONSOLE
	bool "Console based implementaion (EXPERIMENTAL)"
	help
	  sec_log_buf will be registered as a console.

endchoice
endif

config SEC_LOG_LAST_KMSG
	bool "Enable /proc/last_kmsg support: if EMBEDDED"
	default n
	depends on SEC_LOG_BUF
	help
	  This option enables /proc/last_kmsg support.

config SEC_LOG_STORE_LAST_KMSG
	bool "store sec log when power off or reboot"
	default n
	depends on SEC_LOG_LAST_KMSG
	help
	  store sec log when power off or reboot.

config SEC_LOG_STORE_LPM_KMSG
	bool "store sec log when LPM Mode boot"
	default n
	depends on SEC_LOG_LAST_KMSG
	help
	  store sec log when LPM Mode boot

config SEC_STORE_POWER_ONOFF_HISTORY
	bool "store power onoff history"
	default n
	depends on SEC_LOG_LAST_KMSG
	help
	  store power onoff history

config SEC_DEBUG_SCHED_LOG
	bool "Samsung Scheduler Logging Feature"
	default n
	help
	  Samsung Scheduler Logging Feature for Debug use.
	  Enables task scheduling history.
	  Enables IRQ scheduling history.
	  This feature is enabled in defconfig.

config SEC_DEBUG_SCHED_LOG_PER_CPU
	bool "Samsung Scheduler Logging using per_cpu"
	default n
	depends on SEC_DEBUG_SCHED_LOG
	help
	  Samsung Scheduler Logging using per_cpu Feature for Debug use.

config SEC_DEBUG_SCHED_LOG_IRQ_V2
	bool "Samsung Scheduler IRQ Logging V2"
	default n
	depends on SEC_DEBUG_SCHED_LOG
	help
	  Samsung Scheduler IRQ Logging V2.

config SEC_DEBUG_MSG_LOG
	bool "Message Log for ram dump debug (DEPRECATED)"
	default n
	depends on SEC_DEBUG_SCHED_LOG
	help
	  Verbose Logging for ram dump analysis.
	  Collects kernel debug log.
	  Log is collected in the no-cache area.
	  This feature is enabled in defconfig.

config SEC_DEBUG_DCVS_LOG
	bool "Temporary Logging for DCVS"
	default n
        depends on SEC_DEBUG_SCHED_LOG
	help
	  DCVS Logging Feature for Debug use.
	  The ACPU clock rate changes will be logged as a part
	  of secdbg_log structure along with the CPU time stamp.
	  The previous frequency and the new frequency for both the CPU along
	  with the CPU time stamp will be logged.

config SEC_DEBUG_POWER_LOG
	bool "Temporary Logging for MSM POWER"
	default n
        depends on SEC_DEBUG_SCHED_LOG
	help
	  POWER Logging Feature for Debug use.
	  The power and clock gating will be logged as a part
	  of secdbg_log structure along with the CPU time stamp.

config SEC_DEBUG_FUELGAUGE_LOG
	bool "Temporary Logging for FuelGauge"
	default n
        depends on SEC_DEBUG_SCHED_LOG
	help
	 FuelGauge Logging Feature for Debug use.
	 The FuelGauge values are logged as a part
	 of secdbg_log structure along with the CPU time stamp.
	 The voltage and soc values along with the CPU time will be logged.

config SEC_DEBUG_SUMMARY
	bool "Debug Summary"
	default n
        depends on SEC_DEBUG_SCHED_LOG
	help
	  Subsystems debug summary feature.
	  When enabled provides kernel logs, modem logs, RPM registers,
	  Schedule and IRQ logs at the time of crash along with the
	  reason for crash, which can be extracted as a html in RAM dump mode.

config SEC_DEBUG_SUMMARY_DRIVER
	bool "Debug Summary Module"
	default n
        depends on SEC_DEBUG_SUMMARY
	help
	  register sec_debug_summary as platform_driver
	  This config invoke sec_debug_summary_probe with auto_probe
	  And of_dt of sec_debug_summary should be in devicetree with
	  compatible = "samsung,sec-debug-summary"

config SEC_DEBUG_LOW_LOG
	bool "Kernel Message Logging for Debug Level Low"
	default n
	help
	 Kernel Message Logging Feature for Debug use.
	 The Kernel Messages are logged using file I/O
	 when an exception occurs, when the debug level is low.
	 The file I/O is added in kernel driver level
	 so that kernel messages are logged on next reboot.

config SEC_DEBUG_FORCE_ERROR
	bool "enable force error"
	default n
	help
	  This option enable to force error by sysfs

config SEC_DEBUG_SEC_WDOG_BITE
	bool "Samsung fore secure bite simulation"
	default n
	depends on QCOM_SCM && SEC_DEBUG_FORCE_ERROR
	help
	  simulation for secure bite.
	  This feature is enabled in defconfig.

config SEC_USER_RESET_DEBUG
	bool "reset reason debug feature in user version"
	default n
	help
	  This option provides reset history log in user version.
	  This option enable proc/reset_reason support

config SEC_USER_RESET_DEBUG_TEST
	bool "reset reason debug test feature in eng version"
	depends on SEC_USER_RESET_DEBUG
	default n
	help
	  This option enable for test in eng version(KP, DP, TP, WP)

config SEC_PERIPHERAL_SECURE_CHK
	bool "PERIPHERAL SECURE check"
	default n
	depends on MSM_PIL
	help
	  This option enables checking the authentication of peripheral image.

config SEC_SSR_DEBUG_LEVEL_CHK
	bool "PERIPHERAL SECURE check"
	default n
	help
	  To check the authentication of peripheral image.

config SEC_DEBUG_PWDT
	bool "Platform Watchdog check"
	depends on QCOM_WATCHDOG_V2
	default n
	help
	  To check Platform Watchdog thread status

config SEC_DEBUG_DUMP_TASK_STACK
	bool "Dump the current stack if a kernel panic occurs"
	default n
	help
	  This feature enable '__die()'s stack dump' feature which disabled in
	  commit c5bc503cbeee8586395aa541d2b53c69c3dd6930.
	  This feature provides context information to load in the simulator
	  insteadh of kernel core dump.

config SEC_DEBUG_MDM_FILE_INFO
	bool "MDM filename and line number in UPLOAD mode (DEPRECATED)"
	default n
	help
	 This feature enables display of MDM info in upload mode.
	 This feature enabled SSR in debug level low.
	 Collects MDM ram dump and then calls panic.
	 UPLOAD mode has MDM dump info to show it on LCD.

config SEC_DEBUG_DOUBLE_FREE
	bool "Enable double free detection (DEPRECATED)"
	default n
	help
	 Detect erraneous codes that frees a kmalloced node
	 twice. When kfree(p) is called, p is not freed right away.
	 Instead, it is pushed into a circular buffer. What it frees
	 is the oldest pointer that was pushed into the buffer.
	 If someone tries to free the same pointer p, *p
	 is read and checked for a magic code that is written
	 when it was first freed. If it matches, the whole
	 circular buffer is searched. Panic is be called when
	 the match is found.

config SEC_FILE_LEAK_DEBUG
	bool "Samsung File Leak Debugging Feature (DEPRECATED)"
	default n
	help
	  Samsung File Leak Debugging Feature for Debug use.
	  Enables the forced panic mode when EMFILE Eror occurs.
	  This feature is enabled in defconfig.

config KERNEL_MODE_NEON_DEBUG
	bool "Check the wrong usage of SIMD registers"
	default n
	depends on ARM64
	help
	  This feature generates BUG() if the wrong usage of SIMD registers
	  in the kernel mode.

config SEC_SLUB_DEBUG
	bool "Keep freeing stack traces on the slub object"
	default n
	depends on SLUB && !SLUB_DEBUG
	help
	  This feature enabled 'freeing stack trace on slub object'
	  to find UAF issues like a memory corruption issues
	  in kmem_cache_cpu->freelist.

config SEC_CP_SEPARATE_DEBUG
	bool "Separate CP debug level from AP's"
	default n
	help
	  CP SSR works according to CP debug level instead of AP debug level

config SEC_DEBUG_MODULE_INFO
	bool "store module information"
	default n
	help
	  store module information for bootloader to use them
endif

config SEC_BOOTSTAT
	bool "Samsung Bootstat Logging Feature"
	default n
	select MSM_BOOT_STATS
	help
	  This feature creates a '/proc/bootstat' node and it provides
	  timestamp info for debugging booting time.

config SEC_NOEYEINFO
	bool "No Store DDR Eye Info Feature"
	default n
	help
	  This feature enable for no store ddr eye info to ddr eye node

config SEC_QPNP_PON_SPARE_BITS
	int "The number of available bits in QPNP_PON_SOFT_RB_SPARE register"
	range 6 7
	default 7
	help
	  The number of available bits in QPNP_PON_SOFT_RB_SPARE register

config SEC_DEBUG_TEST
	bool "KUnit test for sec_debug_test"
	depends on SEC_KUNIT
	help
	  TODO: Describe config fully.