/* Copyright (c) 2016-2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "../../../../../../drivers/gpu/drm/msm/samsung_lego/SELF_DISPLAY/self_display_cmd_FC3.dtsi"
#include "../../../../../../drivers/gpu/drm/msm/samsung_lego/S6E3FC3_AMS667YM01/dsi_panel_S6E3FC3_AMS667YM01_fhd_octa_cmd.dtsi"
#include "../../../../../../drivers/gpu/drm/msm/samsung_lego/PBA_BOOTING/dsi_panel_PBA_BOOTING_fhd_video.dtsi"


&tlmm {
	pmx_sde_te {
			sde_te_active: sde_te_active {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te_suspend: sde_te_suspend {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};
		};

	pmx_sde: pmx_sde {
		sde_dsi_active: sde_dsi_active {
			mux {
				pins = "gpio8";
				function = "gpio";
			};

			config {
				pins = "gpio8";
				drive-strength = <8>;   /* 8 mA */
				bias-disable = <0>;   /* no pull */
			};
		};
		sde_dsi_suspend: sde_dsi_suspend {
			mux {
				pins = "gpio8";
				function = "gpio";
			};

			config {
				pins = "gpio8";
				drive-strength = <2>;   /* 2 mA */
				bias-disable = <0>;   /* no pull */
			};
		};
	};
};

&pm6150_gpios {
	pmx_sde_ub_det {
		sde_ub_det_default: sde_ub_det_default {
			pins = "gpio5";
			function = "normal";
			input-enable;
			power-source = <1>;
			bias-disable; /* No PULL */
		};
	};
};

&soc {
	/* A72Q panel */
	ss_dsi_panel_S6E3FC3_AMS667YM01_FHD_display: qcom,dsi-display@9 {
		label = "ss_dsi_panel_S6E3FC3_AMS667YM01_FHD";
		qcom,display-type = "primary";

	};

	/* PBA */
	ss_dsi_panel_PBA_BOOTING_FHD_display: qcom,dsi-display@10 {
		label = "ss_dsi_panel_PBA_BOOTING_FHD";
		qcom,display-type = "primary";

	};
};

&sde_dsi {
	vci-supply = <&pm6150_l18>; /* 3.0V, VREG_L18A_3P0 */
	vddi-supply = <&pm6150_l13>; /* 1.8V, VREG_L13A_1P8 */

	pinctrl-names = "panel_active", "panel_suspend";
	pinctrl-0 = <&sde_te_active  &sde_dsi_active &sde_ub_det_default>;
	pinctrl-1 = <&sde_te_suspend  &sde_dsi_suspend &sde_ub_det_default>;
	qcom,dsi-display-list =
		<&ss_dsi_panel_S6E3FC3_AMS667YM01_FHD
		&ss_dsi_panel_PBA_BOOTING_FHD>;
};

&ss_dsi_panel_S6E3FC3_AMS667YM01_FHD {
	qcom,display-type = "primary";
	qcom,dsi-display-active;

	qcom,dsi-ctrl-num = <0>;
	qcom,dsi-phy-num = <0>;
	qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";

	qcom,dsi-panel = <&ss_dsi_panel_S6E3FC3_AMS667YM01_FHD>;

	qcom,platform-reset-gpio = <&tlmm 8 0>;
	qcom,platform-te-gpio = <&tlmm 10 0>;		/* DISP_TE	  */

	samsung,ub-con-det = <&pm6150_gpios 5 0>;

	/* ESD related */
	qcom,esd-check-enabled;
	qcom,mdss-dsi-panel-status-check-mode ="irq_check";
	qcom,mdss-dsi-panel-status-irq-trigger1 = "falling";
	samsung,esd-irq-gpio1 = <&tlmm 11 0>; /* EL_ON1_DET */

	qcom,panel-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		    reg = <0>;
		    qcom,supply-name = "vci";
		    qcom,supply-min-voltage = <3000000>;
		    qcom,supply-max-voltage = <3000000>;
		    qcom,supply-enable-load = <100000>;
		    qcom,supply-disable-load = <100>;
		    qcom,supply-pre-on-sleep = <0>; /* unit is ms*/
		    qcom,supply-post-on-sleep = <0>;
		    qcom,supply-pre-off-sleep = <0>;
		};

		qcom,panel-supply-entry@1 {
		    reg = <1>;
		    qcom,supply-name = "vddi";
		    qcom,supply-min-voltage = <1800000>;
		    qcom,supply-max-voltage = <1800000>;
		    qcom,supply-enable-load = <100000>;
		    qcom,supply-disable-load = <100>;
		    qcom,supply-pre-on-sleep = <0>; /* unit is ms*/
		    qcom,supply-post-on-sleep = <0>;
		    qcom,supply-pre-off-sleep = <2>;
		};
	};
};

&ss_dsi_panel_PBA_BOOTING_FHD {
	qcom,display-type = "primary";
	qcom,dsi-display-active;

	qcom,dsi-ctrl-num = <0>;
	qcom,dsi-phy-num = <0>;
	qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";

	qcom,dsi-panel = <&ss_dsi_panel_PBA_BOOTING_FHD>;

	qcom,platform-reset-gpio = <&tlmm 8 0>;
};