/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include "sm8150-qrd.dtsi"
#include "sm8150-qrd-audio-overlay.dtsi"
#include "sm8150-camera-sensor-hdk.dtsi"

&tlmm {
	pmx_ts_rst_active {
		ts_rst_active: ts_rst_active {
			mux {
				pins = "gpio54";
				function = "gpio";
			};

			config {
				pins = "gpio54";
				drive-strength = <16>;
				bias-pull-up;
			};
		};
	};

	pmx_ts_rst_suspend {
		ts_rst_suspend: ts_rst_suspend {
			mux {
				pins = "gpio54";
				function = "gpio";
			};

			config {
				pins = "gpio54";
				drive-strength = <2>;
				bias-pull-down;
			};
		};
	};
};

&soc {
	hbtp {
		compatible = "qcom,hbtp-input";
		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
		pinctrl-0 = <&ts_rst_active>;
		pinctrl-1 = <&ts_rst_suspend>;
		vcc_ana-supply = <&pm8150_l17>;
		vcc_dig-supply = <&pm8150_s4>;
		qcom,afe-load = <20000>;
		qcom,afe-vtg-min = <3000000>;
		qcom,afe-vtg-max = <3000000>;
		qcom,dig-load = <40000>;
		qcom,dig-vtg-min = <1800000>;
		qcom,dig-vtg-max = <1800000>;
		qcom,fb-resume-delay-us = <1000>;
		qcom,afe-force-power-on;
		qcom,afe-power-on-delay-us = <6>;
		qcom,afe-power-off-delay-us = <6>;
		qcom,platform-en-gpio = <&tlmm 53 0>;
	};

	usb1_otg_supply: usb1_otg_supply {
		compatible = "regulator-fixed";
		regulator-name = "regulator_fixed";
		gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
		status = "ok";
	};
};

&usb1 {
	vbus_dwc3-supply = <&usb1_otg_supply>;
	status = "ok";
	dwc3@a800000 {
		dr_mode = "host";
	};
};

&usb2_phy1 {
	status = "ok";
};

&usb_qmp_phy {
	status = "ok";
};

&usb2_phy0 {
	qcom,param-override-seq =
		<0x40 0x70
		 0x28 0x74>;
};

&qupv3_se17_i2c {
	status = "disabled";
};