/* Copyright (c) 2016-2017, 2019-2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&soc {
	ufsphy1: ufsphy@1da7000 {
		compatible = "qcom,ufs-phy-qmp-v3-660";
		reg = <0x1da7000 0xdb8>;
		reg-names = "phy_mem";
		#phy-cells = <0>;
		clock-names = "ref_clk_src",
			"ref_clk",
			"ref_aux_clk";
		clocks = <&clock_rpmcc RPM_SMD_LN_BB_CLK1>,
			<&clock_gcc GCC_UFS_CLKREF_CLK>,
			<&clock_gcc GCC_UFS_PHY_AUX_CLK>;
		status = "disabled";
	};

	ufs_ice: ufsice@1db0000 {
		compatible = "qcom,ice";
		reg = <0x1db0000 0x8000>;
		qcom,enable-ice-clk;
		clock-names = "ufs_core_clk", "bus_clk",
				"iface_clk", "ice_core_clk";
		clocks = <&clock_gcc GCC_UFS_AXI_CLK>,
			 <&clock_gcc GCC_UFS_CLKREF_CLK>,
			 <&clock_gcc GCC_UFS_AHB_CLK>,
			 <&clock_gcc GCC_UFS_ICE_CORE_CLK>;
		qcom,op-freq-hz = <0>, <0>, <0>, <300000000>;
		vdd-hba-supply = <&gdsc_ufs>;
		qcom,msm-bus,name = "ufs_ice_noc";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
				<1 650 0 0>,    /* No vote */
				<1 650 1000 0>; /* Max. bandwidth */
		qcom,bus-vector-names = "MIN",
					"MAX";
		qcom,instance-type = "ufs";
	};

	sdcc1_ice: sdcc1ice@c0c8000 {
		compatible = "qcom,ice";
		reg = <0xc0c8000 0x8000>;
		qcom,enable-ice-clk;
		clock-names = "ice_core_clk_src", "ice_core_clk",
				"bus_clk", "iface_clk";
		clocks = <&clock_gcc SDCC1_ICE_CORE_CLK_SRC>,
			 <&clock_gcc GCC_SDCC1_ICE_CORE_CLK>,
			 <&clock_gcc GCC_SDCC1_APPS_CLK>,
			 <&clock_gcc GCC_SDCC1_AHB_CLK>;
		qcom,op-freq-hz = <300000000>, <0>, <0>, <0>;
		qcom,msm-bus,name = "sdcc_ice_noc";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
			<78 512 0 0>,    /* No vote */
			<78 512 1000 0>; /* Max. bandwidth */
		qcom,bus-vector-names = "MIN",
					"MAX";
		qcom,instance-type = "sdcc";
	};

	ufs1: ufshc@1da4000 {
		compatible = "qcom,ufshc";
		reg = <0x1da4000 0x3000>;
		interrupts = <0 265 0>;
		phys = <&ufsphy1>;
		phy-names = "ufsphy";
		ufs-qcom-crypto = <&ufs_ice>;

		clock-names =
			"core_clk",
			"bus_aggr_clk",
			"iface_clk",
			"core_clk_unipro",
			"core_clk_ice",
			"ref_clk",
			"tx_lane0_sync_clk",
			"rx_lane0_sync_clk";
		clocks =
			<&clock_gcc GCC_UFS_AXI_CLK>,
			<&clock_gcc GCC_AGGRE2_UFS_AXI_CLK>,
			<&clock_gcc GCC_UFS_AHB_CLK>,
			<&clock_gcc GCC_UFS_UNIPRO_CORE_CLK>,
			<&clock_gcc GCC_UFS_ICE_CORE_CLK>,
			<&clock_rpmcc RPM_SMD_LN_BB_CLK1>,
			<&clock_gcc GCC_UFS_TX_SYMBOL_0_CLK>,
			<&clock_gcc GCC_UFS_RX_SYMBOL_0_CLK>;
		freq-table-hz =
			<50000000 200000000>,
			<0 0>,
			<0 0>,
			<37500000 150000000>,
			<75000000 300000000>,
			<0 0>,
			<0 0>,
			<0 0>;

		lanes-per-direction = <1>;

		non-removable;
		qcom,msm-bus,name = "ufs1";
		qcom,msm-bus,num-cases = <12>;
		qcom,msm-bus,num-paths = <2>;
		qcom,msm-bus,vectors-KBps =
		<95 512 0 0>, <1 650 0 0>,          /* No vote */
		<95 512 922 0>, <1 650 1000 0>,     /* PWM G1 */
		<95 512 1844 0>, <1 650 1000 0>,    /* PWM G2 */
		<95 512 3688 0>, <1 650 1000 0>,    /* PWM G3 */
		<95 512 7376 0>, <1 650 1000 0>,    /* PWM G4 */
		<95 512 127796 0>, <1 650 1000 0>,  /* HS G1 RA */
		<95 512 255591 0>, <1 650 1000 0>,  /* HS G2 RA */
		<95 512 2097152 0>, <1 650 102400 0>,  /* HS G3 RA */
		<95 512 149422 0>, <1 650 1000 0>,  /* HS G1 RB */
		<95 512 298189 0>, <1 650 1000 0>,  /* HS G2 RB */
		<95 512 2097152 0>, <1 650 102400 0>,  /* HS G3 RB */
		<95 512 7643136 0>, <1 650 307200 0>; /* Max. bandwidth */
		qcom,bus-vector-names = "MIN",
		"PWM_G1_L1", "PWM_G2_L1", "PWM_G3_L1", "PWM_G4_L1",
		"HS_RA_G1_L1", "HS_RA_G2_L1", "HS_RA_G3_L1",
		"HS_RB_G1_L1", "HS_RB_G2_L1", "HS_RB_G3_L1",
		"MAX";

		qcom,pm-qos-cpu-groups = <0x0F 0xF0>;
		qcom,pm-qos-cpu-group-latency-us = <26 26>;
		qcom,pm-qos-default-cpu = <0>;

		resets = <&clock_gcc GCC_UFS_BCR>;
		reset-names = "core_reset";

		status = "disabled";
	};

	usb3: ssusb@a800000 {
		compatible = "qcom,dwc-usb3-msm";
		reg = <0x0a800000 0xfc100>,
			<0x0c016000 0x400>;
		reg-names = "core_base",
		"ahb2phy_base";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		interrupts = <0 347 0>, <0 243 0>, <0 180 0>;
		interrupt-names = "hs_phy_irq", "ss_phy_irq", "pwr_event_irq";

		USB3_GDSC-supply = <&gdsc_usb30>;
		dpdm-supply = <&qusb_phy0>;

		qcom,msm-bus,name = "usb3";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
				<61 512 0 0>,
				<61 512 240000 800000>;

		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;
		extcon = <&pm660_pdphy>;
		qcom,pm-qos-latency = <41>; /* CPU-CLUSTER-WFI-LVL latency +1 */

		clocks = <&clock_gcc GCC_USB30_MASTER_CLK>,
			<&clock_gcc GCC_CFG_NOC_USB3_AXI_CLK>,
			<&clock_gcc GCC_AGGRE2_USB3_AXI_CLK>,
			<&clock_rpmcc AGGR2_NOC_USB_CLK>,
			<&clock_gcc GCC_USB30_MOCK_UTMI_CLK>,
			<&clock_gcc GCC_USB30_SLEEP_CLK>,
			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
			<&clock_rpmcc CXO_DWC3_CLK>;

		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",
				"noc_aggr_clk", "utmi_clk", "sleep_clk",
				"cfg_ahb_clk", "xo";

		qcom,core-clk-rate = <133330000>;
		qcom,core-clk-rate-hs = <66666667>;

		resets = <&clock_gcc GCC_USB_30_BCR>;
		reset-names = "core_reset";

		dwc3@a800000 {
			compatible = "snps,dwc3";
			reg = <0x0a800000 0xc8d0>;
			interrupt-parent = <&intc>;
			interrupts = <0 131 0>;
			usb-phy = <&qusb_phy0>, <&ssphy>;
			tx-fifo-resize;
			snps,usb3-u1u2-disable;
			snps,disable-clk-gating;
			snps,has-lpm-erratum;
			snps,is-utmi-l1-suspend;
			snps,hird-threshold = /bits/ 8 <0x0>;
			dr_mode = "otg";
			linux,sysdev_is_parent;
			snps,dis_u2_susphy_quirk;
			snps,dis_enblslpm_quirk;
			snps,usb3_lpm_capable;
			usb-core-id = <0>;
			maximum-speed = "super-speed";
		};

		qcom,usbbam@a904000 {
			compatible = "qcom,usb-bam-msm";
			reg = <0x0a904000 0x17000>;
			interrupt-parent = <&intc>;
			interrupts = <0 132 0>;

			qcom,bam-type = <0>;
			qcom,usb-bam-fifo-baseaddr = <0x146bb000>;
			qcom,usb-bam-num-pipes = <8>;
			qcom,ignore-core-reset-ack;
			qcom,disable-clk-gating;
			qcom,usb-bam-override-threshold = <0x4001>;
			qcom,usb-bam-max-mbps-highspeed = <400>;
			qcom,usb-bam-max-mbps-superspeed = <3600>;
			qcom,reset-bam-on-connect;

			qcom,pipe0 {
				label = "ssusb-ipa-out-0";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <0>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <1>;
				qcom,src-bam-pipe-index = <1>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};
			qcom,pipe1 {
				label = "ssusb-ipa-in-0";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <1>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <1>;
				qcom,dst-bam-pipe-index = <0>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};
			qcom,pipe2 {
				label = "ssusb-qdss-in-0";
				qcom,usb-bam-mem-type = <2>;
				qcom,dir = <1>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <0>;
				qcom,peer-bam-physical-address = <0x06064000>;
				qcom,src-bam-pipe-index = <0>;
				qcom,dst-bam-pipe-index = <3>;
				qcom,data-fifo-offset = <0x0>;
				qcom,data-fifo-size = <0x1800>;
				qcom,descriptor-fifo-offset = <0x1800>;
				qcom,descriptor-fifo-size = <0x800>;
			};
			qcom,pipe3 {
				label = "ssusb-dpl-ipa-in-1";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <1>;
				qcom,pipe-num = <1>;
				qcom,peer-bam = <1>;
				qcom,dst-bam-pipe-index = <2>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};
		};
	};

	qusb_phy0: qusb@c012000 {
		compatible = "qcom,qusb2phy";
		reg = <0x0c012000 0x180>,
			<0x01fcb24c 0x4>,
			<0x00780240 0x4>,
			<0x00188018 0x4>;
		reg-names = "qusb_phy_base",
			"tcsr_clamp_dig_n_1p8",
			"tune2_efuse_addr",
			"ref_clk_addr";
		vdd-supply = <&pm660l_l1>;
		vdda18-supply = <&pm660_l10>;
		vdda33-supply = <&pm660l_l7>;
		qcom,vdd-voltage-level = <0 925000 925000>;
		qcom,tune2-efuse-bit-pos = <25>;
		qcom,tune2-efuse-num-bits = <4>;
		qcom,qusb-phy-init-seq = <0xf8 0x80
					0xb3 0x84
					0x83 0x88
					0xc0 0x8c
					0x30 0x08
					0x79 0x0c
					0x21 0x10
					0x14 0x9c
					0x9f 0x1c
					0x00 0x18>;
		phy_type= "utmi";
		qcom,phy-clk-scheme = "cml";
		qcom,major-rev = <1>;

		clocks = <&clock_rpmcc RPM_SMD_LN_BB_CLK1>,
			<&clock_gcc GCC_RX0_USB2_CLKREF_CLK>,
			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;

		clock-names =  "ref_clk_src", "ref_clk", "cfg_ahb_clk";

		resets = <&clock_gcc GCC_QUSB2PHY_PRIM_BCR>;
		reset-names = "phy_reset";
	};

	ssphy: ssphy@c010000 {
		compatible = "qcom,usb-ssphy-qmp-usb3-or-dp";
		reg = <0xc010000 0xe18>,
			<0x01fcb244 0x4>,
			<0x01fcb248 0x4>;
		reg-names = "qmp_phy_base",
			"vls_clamp_reg",
			"tcsr_usb3_dp_phymode";
		vdd-supply = <&pm660l_l1>;
		core-supply = <&pm660_l10>;
		qcom,vdd-voltage-level = <0 925000 925000>;
		qcom,core-voltage-level = <0 1800000 1800000>;
		qcom,vbus-valid-override;
		qcom,qmp-phy-init-seq =
			/* <reg_offset, value, delay> */
				<0xac  0x14 0x00
				 0x34  0x08 0x00
				 0x174 0x30 0x00
				 0x3c  0x06 0x00
				 0xb4  0x00 0x00
				 0xb8  0x08 0x00
				 0x70  0x0f 0x00
				 0x19c 0x01 0x00
				 0x178 0x00 0x00
				 0xd0  0x82 0x00
				 0xdc  0x55 0x00
				 0xe0  0x55 0x00
				 0xe4  0x03 0x00
				 0x78  0x0b 0x00
				 0x84  0x16 0x00
				 0x90  0x28 0x00
				 0x108 0x80 0x00
				 0x10c 0x00 0x00
				 0x184 0x0a 0x00
				 0x4c  0x15 0x00
				 0x50  0x34 0x00
				 0x54  0x00 0x00
				 0xc8  0x00 0x00
				 0x18c 0x00 0x00
				 0xcc  0x00 0x00
				 0x128 0x00 0x00
				 0x0c  0x0a 0x00
				 0x10  0x01 0x00
				 0x1c  0x31 0x00
				 0x20  0x01 0x00
				 0x14  0x00 0x00
				 0x18  0x00 0x00
				 0x24  0xde 0x00
				 0x28  0x07 0x00
				 0x48  0x0f 0x00
				 0x194 0x06 0x00
				 0x100 0x80 0x00
				 0xa8  0x01 0x00
				 0x430 0x0b 0x00
				 0x830 0x0b 0x00
				 0x444 0x00 0x00
				 0x844 0x00 0x00
				 0x43c 0x00 0x00
				 0x83c 0x00 0x00
				 0x440 0x00 0x00
				 0x840 0x00 0x00
				 0x408 0x0a 0x00
				 0x808 0x0a 0x00
				 0x414 0x06 0x00
				 0x814 0x06 0x00
				 0x434 0x75 0x00
				 0x834 0x75 0x00
				 0x4d4 0x02 0x00
				 0x8d4 0x02 0x00
				 0x4d8 0x4e 0x00
				 0x8d8 0x4e 0x00
				 0x4dc 0x18 0x00
				 0x8dc 0x18 0x00
				 0x4f8 0x77 0x00
				 0x8f8 0x77 0x00
				 0x4fc 0x80 0x00
				 0x8fc 0x80 0x00
				 0x4c0 0x0a 0x00
				 0x8c0 0x0a 0x00
				 0x504 0x03 0x00
				 0x904 0x03 0x00
				 0x50c 0x16 0x00
				 0x90c 0x16 0x00
				 0x500 0x00 0x00
				 0x900 0x00 0x00
				 0x564 0x00 0x00
				 0x964 0x00 0x00
				 0x260 0x10 0x00
				 0x660 0x10 0x00
				 0x2a4 0x12 0x00
				 0x6a4 0x12 0x00
				 0x28c 0xc6 0x00
				 0x68c 0xc6 0x00
				 0x244 0x00 0x00
				 0x644 0x00 0x00
				 0x248 0x00 0x00
				 0x648 0x00 0x00
				 0xc0c 0x9f 0x00
				 0xc24 0x17 0x00
				 0xc28 0x0f 0x00
				 0xcc8 0x83 0x00
				 0xcc4 0x02 0x00
				 0xccc 0x09 0x00
				 0xcd0 0xa2 0x00
				 0xcd4 0x85 0x00
				 0xc80 0xd1 0x00
				 0xc84 0x1f 0x00
				 0xc88 0x47 0x00
				 0xcb8 0x75 0x00
				 0xcbc 0x13 0x00
				 0xcb0 0x86 0x00
				 0xca0 0x04 0x00
				 0xc8c 0x44 0x00
				 0xc70 0xe7 0x00
				 0xc74 0x03 0x00
				 0xc78 0x40 0x00
				 0xc7c 0x00 0x00
				 0xdd8 0x88 0x00
				 0xffffffff 0xffffffff 0x00>;

		qcom,qmp-phy-reg-offset =
				<0xd74 /* USB3_PHY_PCS_STATUS */
				 0xcd8 /* USB3_PHY_AUTONOMOUS_MODE_CTRL */
				 0xcdc /* USB3_PHY_LFPS_RXTERM_IRQ_CLEAR */
				 0xc04 /* USB3_PHY_POWER_DOWN_CONTROL */
				 0xc00 /* USB3_PHY_SW_RESET */
				 0xc08 /* USB3_PHY_START */
				 0xa00>; /* USB3PHY_PCS_MISC_TYPEC_CTRL */

		clocks = <&clock_gcc GCC_USB3_PHY_AUX_CLK>,
			<&clock_gcc GCC_USB3_PHY_PIPE_CLK>,
			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
			<&clock_rpmcc RPM_SMD_LN_BB_CLK1>,
			<&clock_gcc GCC_USB3_CLKREF_CLK>;

		clock-names = "aux_clk", "pipe_clk", "cfg_ahb_clk",
				"ref_clk_src", "ref_clk";

		resets = <&clock_gcc GCC_USB3_PHY_BCR>,
			<&clock_gcc GCC_USB3PHY_PHY_BCR>;
		reset-names = "phy_reset", "phy_phy_reset";
	};

	usb_audio_qmi_dev {
		compatible = "qcom,usb-audio-qmi-dev";
		iommus = <&lpass_q6_smmu 6>;
		qcom,usb-audio-stream-id = <6>;
		qcom,usb-audio-intr-num = <2>;
	};

       usb2s: hsusb@c200000 {
		compatible = "qcom,dwc-usb3-msm";
		reg = <0x0c200000 0xfc000>,
			<0x0c016000 0x400>;
		reg-names = "core_base",
			"ahb2phy_base";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		interrupts = <0 348 0>, <0 144 0>;
		interrupt-names = "hs_phy_irq", "pwr_event_irq";

		qcom,msm-bus,name = "usb-hs";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
			<87 512 0 0>,
			<87 512 60000 800000>;

		qcom,pm-qos-latency = <52>; /* CPU-CLUSTER-WFI-LVL latency +1 */
		clocks = <&clock_gcc GCC_USB20_MASTER_CLK>,
			<&clock_gcc GCC_CFG_NOC_USB2_AXI_CLK>,
			<&clock_gcc GCC_USB20_MOCK_UTMI_CLK>,
			<&clock_gcc GCC_USB20_SLEEP_CLK>,
			<&clock_rpmcc CXO_DWC3_CLK>,
			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
		clock-names = "core_clk", "iface_clk", "utmi_clk", "sleep_clk",
				"xo", "cfg_ahb_clk";
		qcom,core-clk-rate = <60000000>;
		resets = <&clock_gcc GCC_USB_20_BCR>;
		reset-names = "core_reset";

		status = "disabled";
		dwc3@c200000 {
			compatible = "snps,dwc3";
			reg = <0x0c200000 0xc8d0>;
			interrupt-parent = <&intc>;
			interrupts = <0 143 0>;
			usb-phy = <&qusb_phy1>, <&usb_nop_phy>;
			maximum-speed = "high-speed";
			snps,is-utmi-l1-suspend;
			snps,hird-threshold = /bits/ 8 <0x0>;
			dr_mode = "host";
			linux,sysdev_is_parent;
			snps,dis_enblslpm_quirk;
			snps,dis_u2_susphy_quirk;
			usb-core-id = <1>;
		};
	};

	qusb_phy1: qusb@c014000 {
		compatible = "qcom,qusb2phy";
		reg = <0x0c014000 0x180>,
			<0x00188014 0x4>;
		reg-names = "qusb_phy_base",
			"ref_clk_addr";
		vdd-supply = <&pm660l_l1>;
		vdda18-supply = <&pm660_l10>;
		vdda33-supply = <&pm660l_l7>;
		qcom,vdd-voltage-level = <0 925000 925000>;
		qcom,qusb-phy-init-seq = <0xF8 0x80
					0xB3 0x84
					0x83 0x88
					0xC0 0x8C
					0x30 0x08
					0x79 0x0C
					0x21 0x10
					0x14 0x9C
					0x9F 0x1C
					0x00 0x18>;
		phy_type = "utmi";
		qcom,phy-clk-scheme = "cml";
		qcom,major-rev = <1>;
		qcom,hold-reset;

		clocks = <&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
			<&clock_gcc GCC_RX1_USB2_CLKREF_CLK>,
			<&clock_rpmcc RPM_SMD_LN_BB_CLK1>;
		clock-names = "cfg_ahb_clk", "ref_clk", "ref_clk_src";

		resets = <&clock_gcc GCC_QUSB2PHY_SEC_BCR>;
		reset-names = "phy_reset";
	};

	usb_nop_phy: usb_nop_phy {
		compatible = "usb-nop-xceiv";
	};

	sdhc_1: sdhci@c0c4000 {
		compatible = "qcom,sdhci-msm-v5";
		reg = <0xc0c4000 0x1000>, <0xc0c5000 0x1000>;
		reg-names = "hc_mem", "cmdq_mem";

		interrupts = <0 110 0>, <0 112 0>;
		interrupt-names = "hc_irq", "pwr_irq";

		qcom,bus-width = <8>;
		qcom,large-address-bus;
		sdhc-msm-crypto = <&sdcc1_ice>;

		qcom,devfreq,freq-table = <50000000 200000000>;

		qcom,pm-qos-irq-type = "affine_irq";
		qcom,pm-qos-irq-latency = <43 518>;
		qcom,pm-qos-cpu-groups = <0x0f 0xf0>;
		qcom,pm-qos-cmdq-latency-us = <43 518>, <40 518>;
		qcom,pm-qos-legacy-latency-us = <43 518>, <40 518>;

		qcom,msm-bus,name = "sdhc1";
		qcom,msm-bus,num-cases = <9>;
		qcom,msm-bus,num-paths = <2>;
		qcom,msm-bus,vectors-KBps =
			/* No vote */
			<78 512 0 0>, <1 606 0 0>,
			/* 400 KB/s*/
			<78 512 1046 1600>,
			<1 606 1600 1600>,
			/* 20 MB/s */
			<78 512 52286 80000>,
			<1 606 80000 80000>,
			/* 25 MB/s */
			<78 512 65360 100000>,
			<1 606 100000 100000>,
			/* 50 MB/s */
			<78 512 130718 200000>,
			<1 606 133320 133320>,
			/* 100 MB/s */
			<78 512 130718 200000>,
			<1 606 150000 150000>,
			/* 200 MB/s */
			<78 512 261438 400000>,
			<1 606 300000 300000>,
			/* 400 MB/s */
			<78 512 261438 400000>,
			<1 606 300000 300000>,
			/* Max. bandwidth */
			<78 512 1338562 4096000>,
			<1 606 1338562 4096000>;
		qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
			100000000 200000000 400000000 4294967295>;

		clocks = <&clock_gcc GCC_SDCC1_AHB_CLK>,
			 <&clock_gcc GCC_SDCC1_APPS_CLK>,
			 <&clock_gcc GCC_SDCC1_ICE_CORE_CLK>;
		clock-names = "iface_clk", "core_clk", "ice_core_clk";

		qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
						192000000 384000000>;

		qcom,nonremovable;
		qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";

		qcom,ice-clk-rates = <300000000 75000000>;

		qcom,scaling-lower-bus-speed-mode = "DDR52";

		status = "disabled";
	};

	sdhc_2: sdhci@c084000 {
		compatible = "qcom,sdhci-msm-v5";
		reg = <0xc084000 0x1000>;
		reg-names = "hc_mem";

		interrupts = <0 125 0>, <0 221 0>;
		interrupt-names = "hc_irq", "pwr_irq";

		qcom,bus-width = <4>;
		qcom,large-address-bus;

		qcom,msm-bus,name = "sdhc2";
		qcom,msm-bus,num-cases = <8>;
		qcom,msm-bus,num-paths = <2>;
		qcom,msm-bus,vectors-KBps =
			/* No vote */
			<81 512 0 0>, <1 608 0 0>,
			/* 400 KB/s*/
			<81 512 1046 1600>,
			<1 608 1600 1600>,
			/* 20 MB/s */
			<81 512 52286 80000>,
			<1 608 80000 80000>,
			/* 25 MB/s */
			<81 512 65360 100000>,
			<1 608 100000 100000>,
			/* 50 MB/s */
			<81 512 130718 200000>,
			<1 608 133320 133320>,
			/* 100 MB/s */
			<81 512 261438 200000>,
			<1 608 150000 150000>,
			/* 200 MB/s */
			<81 512 261438 400000>,
			<1 608 300000 300000>,
			/* Max. bandwidth */
			<81 512 1338562 4096000>,
			<1 608 1338562 4096000>;
		qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
			100000000 200000000 4294967295>;

		qcom,devfreq,freq-table = <50000000 200000000>;

		qcom,pm-qos-irq-type = "affine_irq";
		qcom,pm-qos-irq-latency = <43 518>;
		qcom,pm-qos-cpu-groups = <0x0f 0xf0>;
		qcom,pm-qos-legacy-latency-us = <43 518>, <40 518>;

		clocks = <&clock_gcc GCC_SDCC2_AHB_CLK>,
			<&clock_gcc GCC_SDCC2_APPS_CLK>;
		clock-names = "iface_clk", "core_clk";

		qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
								200000000>;
		qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50",
								"SDR104";

		status = "disabled";
	};
};