/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "sa515m-v2-ttp.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. SA515M TTP eMMC";
	compatible = "qcom,sa515m-ttp",
		"qcom,sdxprairie","qcom,ttp";
	qcom,board-id = <30 0x5> , <30 0x105>;
};

&tlmm {
	sdc1_data_4_on: sdc1_data_4_on {
		mux {
			pins = "gpio98";
			function = "gpio";
		};

		config {
			pins = "gpio98";
			drive-strength = <4>;
			bias-pull-up;
		};
	};

	sdc1_data_4_off: sdc1_data_4_off {
		mux {
			pins = "gpio98";
			function = "gpio";
		};

		config {
			pins = "gpio98";
			drive-strength = <2>;
			bias-disable;
		};
	};

	sdc1_data_5_on: sdc1_data_5_on {
		mux {
			pins = "gpio99";
			function = "gpio";
		};

		config {
			pins = "gpio99";
			drive-strength = <4>;
			bias-pull-up;
		};
	};

	sdc1_data_5_off: sdc1_data_5_off {
		mux {
			pins = "gpio99";
			function = "gpio";
		};

		config {
			pins = "gpio99";
			drive-strength = <2>;
			bias-disable;
		};
	};

	sdc1_data_6_on: sdc1_data_6_on {
		mux {
			pins = "gpio100";
			function = "gpio";
		};

		config {
			pins = "gpio100";
			drive-strength = <4>;
			bias-pull-up;
		};
	};

	sdc1_data_6_off: sdc1_data_6_off {
		mux {
			pins = "gpio100";
			function = "gpio";
		};

		config {
			pins = "gpio100";
			drive-strength = <2>;
			bias-disable;
		};
	};

	sdc1_data_7_on: sdc1_data_7_on {
		mux {
			pins = "gpio101";
			function = "gpio";
		};

		config {
			pins = "gpio101";
			drive-strength = <4>;
			bias-pull-up;
		};
	};

	sdc1_data_7_off: sdc1_data_7_off {
		mux {
			pins = "gpio101";
			function = "gpio";
		};

		config {
			pins = "gpio101";
			drive-strength = <2>;
			bias-disable;
		};
	};
};

&sdhc_1 {
	vdd-supply = <&vreg_sd_vdd>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <0 570000>;

	vdd-io-supply = <&vreg_vddpx_2>;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 325000>;

	reg = <0x8804000 0x1000>, <0x8805000 0x1000>,
			<0x0F198028 0x4>;
	reg-names = "hc_mem", "cmdq_mem", "tlmm_mem";

	qcom,bus-width = <8>;
	tlmm_cfg = <0x6>;
	qcom,clk-rates = <400000 20000000 25000000 50000000
				100000000>;
	qcom,devfreq,freq-table = <50000000 100000000>;

	qcom,bus-speed-mode = "DDR_1p8v";

	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
		&sdc1_data_4_on &sdc1_data_5_on
		&sdc1_data_6_on &sdc1_data_7_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
		&sdc1_data_4_off &sdc1_data_5_off
		&sdc1_data_6_off &sdc1_data_7_off>;

	/delete-property/ cd-gpios;

	status = "ok";
};