/*
 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "qcs405.dtsi"
#include "qcs405-audio-overlay.dtsi"
#include "qcs405-geni-ir-overlay.dtsi"
#include "qcs405-circular-pca9956.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. QCS405 EVB1 4000 DSI IOT";
	compatible = "qcom,qcs405-iot", "qcom,qcs405", "qcom,iot";
	qcom,board-id = <0x020020 0x1>;
};

#include "qcs405-mdss-panels.dtsi"

&mdss_hdmi_tx {
	pinctrl-names = "hdmi_hpd_active", "hdmi_ddc_active", "hdmi_cec_active",
				"hdmi_active", "hdmi_sleep";
	pinctrl-0 = <&mdss_hdmi_5v_active  &mdss_hdmi_hpd_active
			&mdss_hdmi_ddc_suspend &mdss_hdmi_cec_suspend>;
	pinctrl-1 = <&mdss_hdmi_5v_active &mdss_hdmi_hpd_active
			&mdss_hdmi_ddc_active &mdss_hdmi_cec_suspend>;
	pinctrl-2 = <&mdss_hdmi_5v_active &mdss_hdmi_hpd_active
			&mdss_hdmi_cec_active &mdss_hdmi_ddc_suspend>;
	pinctrl-3 = <&mdss_hdmi_5v_active &mdss_hdmi_hpd_active
			&mdss_hdmi_ddc_active &mdss_hdmi_cec_active>;
	pinctrl-4 = <&mdss_hdmi_5v_suspend &mdss_hdmi_hpd_suspend
			&mdss_hdmi_ddc_suspend &mdss_hdmi_cec_suspend>;
};

&mdss_mdp {
	qcom,mdss-pref-prim-intf = "dsi";
};

&mdss_dsi {
	hw-config = "single_dsi";
};

&mdss_dsi0 {
	qcom,dsi-pref-prim-pan = <&dsi_hx8394d_720_vid>;
	pinctrl-names = "mdss_default", "mdss_sleep";
	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-te-gpio = <&tlmm 41 0>;
	qcom,platform-reset-gpio = <&tlmm 39 0>;
	qcom,platform-bklight-en-gpio = <&tlmm 48 0>;
};

&dsi_hx8394d_720_vid {
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_tlmm_gpio";
	qcom,mdss-dsi-bl-pmic-bank-select = <0>;
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
};

&i2c_5 { /* BLSP (NTAG) */
	status = "ok";
	nq@55 {
		status = "ok";
	};
};

&soc {
	spi@78b5000 {
		status = "ok";
		spi@0 {
			compatible = "qcom,spi-msm-codec-slave";
			reg = <0>;
			spi-max-frequency = <50000000>;
		};
	};
};

&sdhc_2 {
	/delete-property/ qcom,devfreq,freq-table;
	/delete-property/ cd-gpios;

	qcom,clk-rates = <400000 20000000 25000000
				50000000 100000000>;
	/* VDD is an external regulator eLDO5 */
	vdd-io-supply = <&pms405_l6>;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	post-power-on-delay-ms = <100>;

	qcom,core_3_0v_support;
	qcom,nonremovable;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on
		&sdc2_wlan_on4>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
		&sdc2_wlan_off4>;

	status = "ok";
};