Plug ocfs2 into ->fiemap. Some portions of ocfs2_get_clusters() had to be
refactored so that the extent cache can be skipped in favor of going
directly to the on-disk records. This makes it easier for us to determine
which extent is the last one in the btree. Also, I'm not sure we want to be
caching fiemap lookups anyway as they're not directly related to data
read/write.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: ocfs2-devel@oss.oracle.com
Cc: linux-fsdevel@vger.kernel.org
ocfs2 will become read-only if we try to read the bytes which pass
the end of i_size. This can be easily reproduced by following steps:
1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse.
2. create a small file(say less than 100 bytes) and we will create the file
which is allocated 1 cluster.
3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit.
4. The ocfs2 volume becomes read-only and dmesg shows:
OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks:
Inode 66010 has a hole at block 1
File system is now read-only due to the potential of on-disk corruption.
Please run fsck.ocfs2 once the file system is unmounted.
So suppress the ERROR message.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_stack_driver_request() function failed to increment the
refcount of an already-active stack. It only did the increment on the
first reference. Whoops.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Marcos Matsunaga <marcos.matsunaga@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We were setting i_blocks based on allocation before the extent insert, which
is wrong as the value is a calculation based on ip_clusters which gets
updated as a result of the insert. This patch moves the line in question
to just after the call to ocfs2_insert_extent().
Without this fix, inline directories were temporarily having an i_blocks
value of zero immediately after expansion to extents.
Reported-and-tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we fail to insert extent in ocfs2_expand_inline_dir(), we should go to
out_commit, not out.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This fixes a bug introduced with 539d8264093560b917ee3afe4c7f74e5da09d6a5:
[PATCH 2/2] ocfs2: Fix race between mount and recovery
ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2/cluster/netdebug.c: fix warning
fs/ocfs2/cluster/netdebug.c:154: warning: format '%lu' expects
type 'long unsigned int', but argument 17 has type 'suseconds_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Commit 0f475b2abe (ocfs2/net: Silence build
warnings) made sense as far as it fixed compile warnings, but it was not
required that it made the functions global.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.
The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression l;
@@
mutex_lock(l);
... when != mutex_unlock(l)
when any
when strict
(
if (...) { ... when != mutex_unlock(l)
+ mutex_unlock(l);
return ...;
}
|
mutex_unlock(l);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes an oops that is reproduced when one races writes to a mmap-ed
region with another process truncating the file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.
If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.
The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.
This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f843. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch renames the ij_pad to ij_recovery_generation in struct ocfs2_dinode.
This will be used to keep count of journal replays after an unclean shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values. These errors are
bubbled up appropriately. NULL returns are changed to -ENOMEM for
compatibility.
Also updated are the in-kernel users of configfs.
This is a rework of reverted commit 11c3b79218.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch fixes a mmap_truncate bug which was found by ocfs2 test suite.
In an ocfs2 cluster more than 1 node, run program mmap_truncate, which races
mmap writes and truncates from multiple processes. While the test is
running, a stat from another node forces writeout, causing an oops in
ocfs2_get_block() because it sees a buffer to write which isn't allocated.
This patch fixed the bug by clear dirty and uptodate bits in buffer, leave
the buffer unmapped and return.
Fix is suggested by Mark Fasheh, and I code up the patch.
Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return an int.
Also updated are the in-kernel users of configfs.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Some system files are per-slot. Their names include the slot number.
ocfs2_sprintf_system_inode_name() uses the system inode definitions to
fill in the slot number with snprintf().
For global system files, there is no node number, and the name was
printed as a format with no arguments. -Wformat-nonliteral and
-Wformat-security don't like this. Instead, use a static "%s" format
and the name as the argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
suseconds_t is type long on most arches except sparc64 where it is type int.
This patch silences the following warnings that are generated when building
on it.
netdebug.c: In function 'nst_seq_show':
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 13 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 15 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 17 has type 'suseconds_t'
netdebug.c: In function 'sc_seq_show':
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 19 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 21 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 23 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 25 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 27 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 29 has type 'suseconds_t'
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch ensures the mount fails if the fs is unable to load the journal.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences an EINVAL error message in ocfs2_file_aio_read()
that is always due to a user error.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix printk format warnings when OCFS2_FS_STATS=n:
linux-next-20080528/fs/ocfs2/dlmglue.c: In function 'ocfs2_dlm_seq_show':
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds code to track the number of times the fs takes
various cluster locks as well as the times associated with it.
The information is made available to users via debugfs.
This patch was originally written by Jan Kara <jack@suse.cz>.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The stack-glue merge changed the way we use flags in dlmglue in that we now
use the fs/dlm equivalents. Unfortunately, a merge error left the new flock
code only partially updated. This took a while to show up though, because
the lock level constants are actually identical between o2dlm and fs/dlm.
The *_CONVERT and *_NOQUEUE flags have different values though, which is
eventually causing a crash in flags_to_o2dlm().
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch fixes a race that can result in an oops while adding a
lockres to the dlm lockres tracking list.
Bug introduced by mainline commit 29576f8bb5.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that
the generic stack glue code handles this, the underlying stack drivers
don't need to know about it.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Take o2hb_stop() out of the o2cb code and make it part of the generic
stack glue as ocfs2_leave_group(). This also allows us to remove the
ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now
part of stackglue.c. o2cb no longer needs a ->hangup() function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2 needs to call out to the hb_ctl program at unmount for all cluster
stacks. The first step is to move the hb_ctl_path sysctl out of the
o2cb code and into the generic stack glue.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning o2net_init_nst()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning dlm_debug_init()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences the build warnings concerning o2net_debugfs_init()
and friends when building without CONFIG_DEBUG_FS enabled.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The static structure describing the userspace cluster plugin for ocfs2
was named 'user_stack', which is a real pain when people are grep(1)ing
the tree for the program stack object 'user_stack'. Change the name to
something distinct and namespaced.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
kmalloc() during a localalloc window move can trigger the mm to prune
the dcache which inturn can trigger the fs to delete an inode causing
it start a recursive transaction.
The fix also makes the change in kmalloc during localalloc shutdown
just to be safe.
Fixes oss bugzilla#901
http://oss.oracle.com/bugzilla/show_bug.cgi?id=901
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds the ability to change attributes of a symlink.
Fixes oss bugzilla#963
http://oss.oracle.com/bugzilla/show_bug.cgi?id=963
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch makes the following needlessly global functions static:
- stringify_lockname()
- dlm_debug_put()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch makes the needlessly global struct o2cb_stack_ops static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch makes the needlessly global struct ocfs2_control_device
static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Commit 52f7c21b61 was intended to move
/sys/o2cb to /sys/fs/o2cb, providing /sys/o2cb as a symlink for
backwards compatibility. However, the merge apparently added the
symlink but failed to move the directory, resulting in a duplicate
filename error. It's a one-line change that was missing.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB. If this flag is
set, then don't update the per-bdi writeback stats from
test_set_page_writeback() and test_clear_page_writeback().
Misc cleanups:
- convert bdi_cap_writeback_dirty() and friends to static inline functions
- create a flag that includes all three dirty/writeback related flags,
since almst all users will want to have them toghether
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some ioctl()s can cause writes to the filesystem. Take these, and make them
use mnt_want/drop_write() instead.
[AV: updated]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch exposes o2net information via debugfs. The information includes
the list of sockets (sock_containers) as well as the list of outstanding
messages (send_tracking). Useful for o2dlm debugging.
(This patch is derived from an earlier one written by Zach Brown that
exposed the same information via /proc.)
[Mark: checkpatch fixes]
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if
CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more
- the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is
set, so update the dlm Makefile accordingly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
We keep seeing bug reports related to NULL pointer derefs in
o2net_set_nn_state(). When I originally wrote up the configurable timeout
patch, I had tried to plan for multiple clusters. This was silly.
The timeout routines all use o2nm_single_cluster so there's no point in
passing an argument at all. This patch removes the arguments and kills those
bugs dead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@ disable unlikely @ expression E,f; @@
(
if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)
@@ expression E,f; @@
(
if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As far as I can see there is nothing in ocfs2_ioctl that requires the BKL,
so use unlocked_ioctl
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Mark Fasheh