This is a third attempt to enable these buttons. The new variable being
commit 997daa1bd9 (i.e. hp-wmi: detect
"2009 BIOS or later"). Older systems that do not have the 2009 BIOS query
method respond with a dummy value, in this case 4. Using that, we can
target a fairly narrow group of systems. i.e. old enough to not have
HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9.
This group may be further limited if some systems respond with something
other than 4 to non-existant feature queries.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12
keys should be mapped to: control-panel, search, show-all-windows and Computer.
These keys generate the sofar unused 28 - 31 hotkey scancodes.
For the first 2 this nicely matches the icons on the keys, for the latter 2
the icons are somewhat creative, which is why I ended up looking them up in
the user manual.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. The label sysfs_failed is removed as it is no longer
required. Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers
already do. Add COMPILE_TEST as an alternative for both xo1-rfkill
and xo15-ebook, to increase the build testing coverage.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
There is a risk that the variable will be used without being initialized.
This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace
to not even try to use the wlan / bluetooth even though they work fine.
Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the
rfkill initialization, it is not necessary as the priv struct is allocated
with kzalloc.
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: Andreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since there are now multiple HDMI attributes associated with the WMAX method,
create a sysfs group for them instead.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This more closely reflects what the hardware can actually support.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
We've observed the missing pvpanic call at panic, and it turned out
that this was blocked by the broken notifier of drm_fb_helper, where
scheduling may be called during switching to the fb console.
It's fairly difficult to fix the drm_fb problem and a quick fix isn't
foreseen, a simpler solution for the missing pvpanic call would be
just to call this earlier.
In order to assure that, this patch sets a higher priority to pvpanic
notifier_block. Once when the issue of drm_fb is resolved, we can
remove this priority again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
These models have only 4 levels of keyboard backlight brightness and forget
how to work the backlight after resuming from S3 sleep. I've added a quirk
to set the appropriate number of backlight levels, and one to re-enable the
keyboard backlight on resume.
(Whitespace cleaned up by Matthew Garrett)
Signed-off-by: Scott Thrasher <scott.thrasher@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba Satellite M840 laptop has a complete different keymap although
it's bound with the same ACPI ID "TOS1900". This patch provides an
alternative keymap specific to this machine by identifying via DMI
matching. The keymap table doesn't fill all entries that were used
before since some keys aren't found on this machine at all.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69761
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812209
Reported-and-tested-by: Federico Vecchiarelli <fedev@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Only pin 0-7 support input, so the valid offset range should be 0 ~ 7.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all. Make it a void function and remove the tests of the
return value from the callers.
[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
By reading the touchscreen configuration from the settings that the
maXTouch chip is actually using, we can remove some platform data.
The matrix size is not used for anything, and results in some rather
confusing code to re-read it because it may change when configuration
is downloaded, so don't print it out.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Aspire 5741 has broken acpi-video backlight control, so add it to the
quirk table.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1012674
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch from acpi_video_unregister(), to acpi_video_unregister_backlight(),
so that the hotkeys handler registered by acpi-video stays in place.
Since there are no mappings for the atkbd raw codes for the brightness
keys used by newer Acer models in /lib/udev/hwdb.d/60-keyboard.hwdb, and
since we map the wmi events with a code of KE_IGNORE, we rely on acpi-video
to do the hotkey handling for us.
For laptops such as the Acer Aspire 5750 which uses intel gfx this works
despite us calling acpi_video_unregister() because the following happens:
1) acpi-video module gets loaded (as it is a dependency of acer-wmi and i915)
2) acpi-video does NOT call acpi_video_register()
3) acer-wmi loads (assume it loads before i915), calls
acpi_video_dmi_promote_vendor(); which sets
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
4) calls acpi_video_unregister -> not registered, nop
5) i915 loads, calls acpi_video_register
6) acpi_video_register registers the acpi_notifier for the hotkeys,
does NOT register a backlight device because of
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
But on the Acer Aspire 5750G, which uses nvidia graphics the following happens:
1) acpi-video module gets loaded (as it is a dependency of acer-wmi)
2) acpi-video calls acpi_video_register()
3) acpi_video_register registers the acpi_notifier for the hotkeys,
and a backlight device
4) acer-wmi loads, calls acpi_video_dmi_promote_vendor()
5) calls acpi_video_unregister, this unregisters BOTH the acpi_notifier for
the hotkeys AND the backlight device
And we end up without any handler for the brightness hotkeys. This patch fixes
this by switching over to acpi_video_unregister_backlight() which keeps the
hotkey handler in place.
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* The mapping of the GPIO numbers into the T19 status byte varies between
different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array
of up to 8 items is simpler and more generic. So replace #define with
configurable number of keys which also allows the removal of is_tp.
* Rename platform data parameters to include "t19" to prevent confusion with
T15 key array.
* Probe aborts early on when pdata is NULL, so no need to check.
* Move "int i" to beginning of function (mixed declarations and code)
* Use API calls rather than __set_bit()
* Remove unused dev variable.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is not necessary to download these values to the maXTouch chip on every
probe, since they are stored in NVRAM. It makes life difficult when tuning
the device to keep them in sync with the config array/file, and requires a
new kernel build for minor tweaks.
These parameters only represent a tiny subset of the available
configuration options, tracking all of these options in platform data would
be a endless task. In addition, different versions of maXTouch chips may
have these values in different places or may not even have them at all.
Having these values also makes life more complex for device tree and other
platforms where having to define a static configuration isn't helpful.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_cmd_status':
drivers/platform/goldfish/goldfish_pipe.c:164:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
^
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_cmd':
drivers/platform/goldfish/goldfish_pipe.c:180:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
^
drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_pipe_read_write':
drivers/platform/goldfish/goldfish_pipe.c:337:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)pipe, dev->base + PIPE_REG_CHANNEL);
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jun Tian <jun.j.tian@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/platform/goldfish/pdev_bus.c: In function 'goldfish_new_pdev':
drivers/platform/goldfish/pdev_bus.c:136:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
writel((u32)(u64)name, pdev_bus_base + PDEV_BUS_GET_NAME);
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jun Tian <jun.j.tian@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the 64bit helper method to scrub most of the ifdefs from the driver. The
pipe reading has a funny case we can't scrub completely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchs adds a new register to pass the upper 32bits for the
device name address when running in 64bit mode.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using multiple adb on 64 bit kernel to transfer data,
the goldfish pipe interrupt will crash the kernel.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support 64-bit channel and address for the goldfish pipe driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a bug fix that has been lurking in the Google tree but not pushed
upstream.
From: Octavian Purdila <octavian.purdila@intel.com>
The memory region is already reserved in goldfish_init() during
platform init.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel test builder caught a few instances that should test if kzalloc failed to
allocate memory as well as a scenario that platform_driver wasn't properly
initialized.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.
This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
The button mappings for the Fujitsu Lifebook T901 and T902 are quite different
from the generic Lifebook T mappings that are defined. This patch adds
mappings that are specific to the hardware on these machines, and allows
users to take advantage of features like screen rotation.
Signed-off-by: Scott K Logan <logans@cottsay.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
... so that one can know what this option is about without opening the
long help text.
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The only real change is passing in event_mask to the formerly nested functions.
Otherwise it's just moving around function and macro code.
This is the only place in the Linux kernel where nested functions are still in
use. Nested functions aren't part of the C standards, and complicate the
generated code. Although the Linux Kernel has never set out to be entirely C
standard compliant, it is increasingly compliant to the standard which is
supported by other compilers such as Clang. The LLVMLinux project is working on
being able to compile the Linux kernel with Clang. The use of nested functions
blocks this effort.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
CC: David Woodhouse <David.Woodhouse@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Dan Aloni has submitted a patch to set adaptive mode to function mode
when system resume back. Thanks Dan. :)
Following patch can make it to be restored to previous mode like What
Windows does.
Thanks,
Shuduo
>From 0ca960138518ceab23110141a0d7c0cafd54a859 Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Thu, 27 Mar 2014 17:51:24 +0800
Subject: [PATCH] save and restore adaptive keyboard mode for suspend and
resume
The mode of adaptive keyboard on X1 Carbon need be saved first before
suspend then it can be restored after resume. Otherwise it will be
unusable.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Submit patch V4 to support Adaptive Keyboard on Thinkpad X1 Carbon 2nd
generation according to Tobias's comments.
Thanks,
Shuduo
>From b153a7b14791c6e01892c0e274e23eefd625fb8d Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@canonical.com>
Date: Mon, 3 Mar 2014 14:29:32 +0800
Subject: [PATCH] support thinkpad X1 Carbon's adaptive keyboard
Thinkpad X1 Carbon's adaptive keyboard has five modes including Home
mode, Web browser mode, Web conference mode, Function mode and Lay-flat
mode. We support Home mode and Function mode currently.
Signed-off-by: Bruce Ma <bruce.ma@canonical.com>
Signed-off-by: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Given that some new features were added to the
driver, bump its version to 0.20 and add myself
to the copyright list for these new features
that were added.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Recent Toshiba laptops now come equiped with a built in
accelerometer (TOS620A) device, but such device does not
expose the axes information, however, HCI calls 0x006d
and 0x00a6 can be used to query such info.
This patch adds support to read the axes values by
exposing them through the _position_ sysfs file.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Newer Toshiba laptops now come with a feature called
ECO Mode, where the system is put in low power consupmtion
state and a green (world shaped with leaves) icon illuminates
indicating that the system is in such power state.
This patch adds support to turn on/off the ECO led by
creating and registering the toshiba::eco_mode led.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba laptops have two ways of letting userspace
know the touchpad has changed state, one with a
button on top of the touchpad that simply emmits
scancodes whenever enabled/disabled, and another one
by pressing Fn-F9 (touchpad toggle) hotkey.
This patch adds support to enable/disable the touchpad
by exposing the _touchpad_ file in sysfs that simply
makes a call to a SCI register, imitating what
Toshiba provided software does on Windows.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Toshiba laptops equiped with an illuminated keyboard
can operate in two different modes: Auto and FN-Z.
The Auto mode turns on the led on keystrokes and
automatically turns it off after some (configurable)
time the last key was pressed.
The FN-Z mode is used to toggle the keyboard led on/off
by userspace.
This patch adds support to set the desired KBD mode and
timeout via sysfs, creates and registers toshiba::kbd_backlight
led device whenever the mode is set to FN-Z.
The acceptable values for mode are: 1 (Auto) and 2 (Fn-Z)
The time values range are: 1-60 seconds
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Change the toshiba_illumination_* code to use the
newly introduced SCI functions, making the code
more robust in detecting Illumination capabilities
properly, since it was only opening the SCI and
the return value was never checked for errors or
actual Illumination support.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SCI stands for System Configuration Interface,
which aim is to conceal differences in hardware
between different models.
This patch introduces four new calls: sci_open,
sci_close, sci_read and sci_write, along with
its definitions and return codes which will be
used by later patches.
More information about the SCI can be found at
Jonathan Buzzard's website [1].
[1] http://www.buzzard.me.uk/toshiba/docs.html
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The mute LED states have to be restored after resume.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70351
Cc: <stable@vger.kernel.org> [v3.13+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This reverts commit 997ab407d2. This driver is
replaced by the more general SOC IOSF driver in commit 4618441536.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The current value is not available through the SNC device and therefore
the attribute is writable only.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Keyboard backlight can be always off, use some automatic trigger
(activity and light sensor), always on.
The behaviour of the driver changes whereby previously when passed 1 it
tried to turn on backlight immediately now it does nothing. This is
however a bug fix since (a) it makes little sense to turn on the
backlight when control is automatic and (b) this behaviour is
consistent with what the windows driver does.
Signed-off-by: Javier Achirica <jachirica@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Kyle Evans