As far as I can tell the only reason microblaze has
__ARCH_WANT_INTERRUPTS_ON_CTXSW is because it initializes new task state
with interrupts enabled so that on switch_to() interrupts get enabled.
So change copy_thread() to clear MSR_IE instead of set it, this will
ensure switch_to() will always keep IRQs disabled.
The scheduler will disable IRQs when taking rq->lock in schedule() and
enable IRQs in finish_lock_switch() after its done its magic.
This leaves ARM the only __ARCH_WANT_INTERRUPTS_ON_CTXSW user.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Add missing __ucmpdi2 helper function.
Error log:
kernel/built-in.o: In function `print_graph_duration':
: undefined reference to `__ucmpdi2'
kernel/built-in.o: In function `print_graph_duration':
: undefined reference to `__ucmpdi2'
Based on MIPS code.
Signed-off-by: Michal Simek <monstr@monstr.eu>
It fixes the signal nr raised for divizion by zero from
SIGILL to SIGFPE, in accordance to POSIX and other archs.
This came up due to a failed test in the GCC testsuite.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Switch arch code to 189, the registered code in the upstream
version of binutils. Continue to accept the experimental 0xbaab.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Added support gor dma_direct_sync_single_for_*() and dma_direct_sync_sg_for_*()
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
__dma_sync_page() was replaced by __dma_sync(), and parameters of calls to
the new function were adjusted to match __dma_sync()'s format.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
There is the problem with bit OR (|) because for
some combination is addr | size | addr+size equal
to seq.
For standard kernel setting (kernel starts at 0xC0000000)
is seq for user space 0xBFFFFFFF and everything below
this limit is fine.
But even address 0xBFFFFFFF is fine because it
is below kernel space.
Signed-off-by: Andrew Fedonczuk <andrew.fedonczuk@ericsson.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Top bit is used as garbage and it must be clear
explicitly.
It is causing the problem with soft lookup code
because it checks delays which are long when
top bit is setup.
Signed-off-by: Michal Simek <monstr@monstr.eu>
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.
Fix these broken references, sometimes by dropping the irrelevant text
they were part of.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The nfsservctl system call is now gone, so we should remove all
linkage for it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When interrupt controller uses 32 interrupts lines the kernel
show error message about mismatch in kind-of-intr parameter
because it exceeds u32. Recast fixs this issue.
Signed-off-by: Michal Simek <monstr@monstr.eu>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ poleg@redhat.com: no need to declare show_regs() in ptrace.h, sched.h does this ]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c9d761b7c4.
Ben' commit "microblaze/pci: Move the remains of pci_32.c to pci-common.c"
(sha1: bf13a6fa09)
completely removed pci_32.c that's why my fixing commit caused
the problem with merging and need to be revert.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Bug introduces in:
powerpc/pci: Make both ppc32 and ppc64 use sysdata for pci_controller
(sha1: b5d937de03)
Signed-off-by: Michal Simek <monstr@monstr.eu>
Recognize early Linux console from chosen - linux,stdout-path
instead of detecting the first console with appropriate
compatible strings.
This patch solved the problem on system with multiple
consoles.
Signed-off-by: Michal Simek <monstr@monstr.eu>
1. Register early console as standard console
2. Enable CON_BOOT console flag to ensure auto-unregistering by the kernel
3. remap_early_printk function remap physical console baseaddr to virtual space
Usage specific function for console remap is done after memory initialization
with IRQ turn off that's why there is not necessary to protect it.
The reason for remapping is that the kernel use TLB 63 for 1:1 address mapping
to be able to use console in very early boot-up phase. But allocating one TLB
just for console caused performance degression that's why ioremaps create new
mapping and TLB 63 is automatically released and ready to use.
Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Russell King <linux@arm.linux.org.uk>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Alan Cox <alan@linux.intel.com>
CC: <linux-serial@vger.kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
The current cpuinfo output for the cache policy has no leading tag:, making
it difficult to parse. Add a leaning "Dcache-policy:" tag to this field.
Signed-off-by: John A. Williams <john.williams@petalogix.com>
Add cpuinfo support for the new MicroBlaze option permitting userspace
(unprivileged) access to the streaming instructions (FSL / AXI-stream).
Emit a noisy warning at bootup if this is enabled, because bad user code
can potentially lockup the CPU.
Signed-off-by: John A. Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The prototype for start_thread() is already present in the MMU/NOMMU
independent part of the file. Remove the duplicate.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Several registers weren't saved correctly to the stack.
Unaligned expection for system with MMU stores
value in ex_tmp_data_loc_X address which is load to registers r3.
The next step is to move this value from r3 to a destination
register which caused unaligned exception. For several registers
this value was directly moved to the register.
For example for r28:
by "or r28, r0, r3"
but register r28 was rewritten when kernel returns from exception
handler by value saved on stack.
This patch changed r3 saving to the correct address on the stack.
For example for r28:
by "swi r3, r1, 4 * 28"
When kernel returns from the exception handler, correct value is restored.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).
Add the notrace notation to prevent them from ever being traced.
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Several fixes as well where the +1 was missing.
Done via coccinelle scripts like:
@@
struct resource *ptr;
@@
- ptr->end - ptr->start + 1
+ resource_size(ptr)
and some grep and typing.
Mostly uncompiled, no cross-compilers.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The generic code always get the device-node in the right place now
so a single implementation will work for all archs
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
All archs do more or less the same thing now, move it into
a single generic place.
I chose pci.h rather than of_pci.h to avoid having to change
all call-sites to include the later.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
There's no point in keeping this separate. Even if microblaze grows
a 64-bit variant, it will probably be able to re-use that code as-is
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
The whole business with re-assigning all bus numbers, creating
an OF bus "map" etc... is ancient powermac stuff that you really
don't care about on microblaze.
Similarly pci_device_from_OF_node() is unused and by getting rid
of it we can get rid of a whole lot of code otherwise unused on
this architecture
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
powerpc has two different ways of matching PCI devices to their
corresponding OF node (if any) for historical reasons. The ppc64 one
does a scan looking for matching bus/dev/fn, while the ppc32 one does a
scan looking only for matching dev/fn on each level in order to be
agnostic to busses being renumbered (which Linux does on some
platforms).
This removes both and instead moves the matching code to the PCI core
itself. It's the most logical place to do it: when a pci_dev is created,
we know the parent and thus can do a single level scan for the matching
device_node (if any).
The benefit is that all archs now get the matching for free. There's one
hook the arch might want to provide to match a PHB bus to its device
node. A default weak implementation is provided that looks for the
parent device device node, but it's not entirely reliable on powerpc for
various reasons so powerpc provides its own.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
32bit and 64bit on x86 are tested and working. The rest I have looked
at closely and I can't find any problems.
setns is an easy system call to wire up. It just takes two ints so I
don't expect any weird architecture porting problems.
While doing this I have noticed that we have some architectures that are
very slow to get new system calls. cris seems to be the slowest where
the last system calls wired up were preadv and pwritev. avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h. frv is
behind with perf_event_open being the last syscall wired up. On h8300
the last system call wired up was epoll_wait. On m32r the last system
call wired up was fallocate. mn10300 has recvmmsg as the last system
call wired up. The rest seem to at least have syncfs wired up which was
new in the 2.6.39.
v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall conflicts.
v7: ported to Linus's latest post 2.6.39 tree.
> arch/blackfin/include/asm/unistd.h | 3 ++-
> arch/blackfin/mach-common/entry.S | 1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>
Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch drops the reference to a global 'cmd_line' variable from
early_init_dt_scan_chosen, and instead passes the pointer to the command
line string via the *data argument. Each architecture does something
slightly different with the initial command line, so it makes sense for
the architecture to be able to specify the variable name.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig
Warning log:
warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet
direct dependencies (USB_SUPPORT)
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Do not trace idle loop which takes a lot time
- Fix cache handling in generic ftrace code
- Do not trace lib functions ashldi3, ashrdi3, lshrdi3
Functions are called from generic ftrace code which
can't be traced
Signed-off-by: Michal Simek <monstr@monstr.eu>
Paul Gortmaker