At the moment, a lot of load balancing code that is irrelevant to non
SMP systems gets included during non SMP builds.
This patch addresses this issue and reduces the binary size on non
SMP systems:
text data bss dec hex filename
10983 28 1192 12203 2fab sched.o.before
10739 28 1192 11959 2eb7 sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At the moment, balance_tasks() provides low level functionality for both
move_tasks() and move_one_task() (indirectly) via the load_balance()
function (in the sched_class interface) which also provides dual
functionality. This dual functionality complicates the interfaces and
internal mechanisms and makes the run time overhead of operations that
are called with two run queue locks held.
This patch addresses this issue and reduces the overhead of these
operations.
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- replace "cont" with "cgrp" in a few places in the CFS cgroup code,
- use write_uint rather than write for cpu.shares write function
Signed-off-by: Paul Menage <menage@google.com>
Acked-by : Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
profile=sleep only works if CONFIG_SCHEDSTATS is set. This patch notes
the limitation in Documentation/kernel-parameters.txt and prints a
warning at boot-time if profile=sleep is used without CONFIG_SCHEDSTAT.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A full register dump along with stack backtrace would make the
"scheduling while atomic" message more helpful. Use show_regs() instead
of dump_stack() for this. We already know we're atomic in here (that is
why this function was called) so show_regs()'s atomicity expectations
are guaranteed.
Also, modify the output of the "BUG: scheduling while atomic:" header a
bit to keep task->comm and task->pid together and preempt_count() after
them.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
clean up sched_domain_debug().
this also shrinks the code a bit:
text data bss dec hex filename
50474 4306 480 55260 d7dc sched.o.before
50404 4306 480 55190 d796 sched.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jeff Dike noticed that wait_for_completion_interruptible()'s prototype
had a mismatched fastcall.
Fix this by removing the fastcall attributes from all the completion APIs.
Found-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
commit 029190c515 (cpuset
sched_load_balance flag) was not tested SCHED_DEBUG enabled as
committed as it dereferences NULL when used and it reordered
the sysctl registration to cause it to never show any domains
or their tunables.
Fixes:
1) restore arch_init_sched_domains ordering
we can't walk the domains before we build them
presently we register cpus with empty directories (no domain
directories or files).
2) make unregister_sched_domain_sysctl do nothing when already unregistered
detach_destroy_domains is now called one set of cpus at a time
unregister_syctl dereferences NULL if called with a null.
While the the function would always dereference null if called
twice, in the previous code it was always called once and then
was followed a register. So only the hidden bug of the
sysctl_root_table not being allocated followed by an attempt to
free it would have shown the error.
3) always call unregister and register in partition_sched_domains
The code is "smart" about unregistering only needed domains.
Since we aren't guaranteed any calls to unregister, always
unregister. Without calling register on the way out we
will not have a table or any sysctl tree.
4) warn if register is called without unregistering
The previous table memory is lost, leaving pointers to the
later freed memory in sysctl and leaking the memory of the
tables.
Before this patch on a 2-core 4-thread box compiled for SMT and NUMA,
the domains appear empty (there are actually 3 levels per cpu). And as
soon as two domains a null pointer is dereferenced (unreliable in this
case is stack garbage):
bu19a:~# ls -R /proc/sys/kernel/sched_domain/
/proc/sys/kernel/sched_domain/:
cpu0 cpu1 cpu2 cpu3
/proc/sys/kernel/sched_domain/cpu0:
/proc/sys/kernel/sched_domain/cpu1:
/proc/sys/kernel/sched_domain/cpu2:
/proc/sys/kernel/sched_domain/cpu3:
bu19a:~# mkdir /dev/cpuset
bu19a:~# mount -tcpuset cpuset /dev/cpuset/
bu19a:~# cd /dev/cpuset/
bu19a:/dev/cpuset# echo 0 > sched_load_balance
bu19a:/dev/cpuset# mkdir one
bu19a:/dev/cpuset# echo 1 > one/cpus
bu19a:/dev/cpuset# echo 0 > one/sched_load_balance
Unable to handle kernel paging request for data at address 0x00000018
Faulting instruction address: 0xc00000000006b608
NIP: c00000000006b608 LR: c00000000006b604 CTR: 0000000000000000
REGS: c000000018d973f0 TRAP: 0300 Not tainted (2.6.23-bml)
MSR: 9000000000009032 <EE,ME,IR,DR> CR: 28242442 XER: 00000000
DAR: 0000000000000018, DSISR: 0000000040000000
TASK = c00000001912e340[1987] 'bash' THREAD: c000000018d94000 CPU: 2
..
NIP [c00000000006b608] .unregister_sysctl_table+0x38/0x110
LR [c00000000006b604] .unregister_sysctl_table+0x34/0x110
Call Trace:
[c000000018d97670] [c000000007017270] 0xc000000007017270 (unreliable)
[c000000018d97720] [c000000000058710] .detach_destroy_domains+0x30/0xb0
[c000000018d977b0] [c00000000005cf1c] .partition_sched_domains+0x1bc/0x230
[c000000018d97870] [c00000000009fdc4] .rebuild_sched_domains+0xb4/0x4c0
[c000000018d97970] [c0000000000a02e8] .update_flag+0x118/0x170
[c000000018d97a80] [c0000000000a1768] .cpuset_common_file_write+0x568/0x820
[c000000018d97c00] [c00000000009d95c] .cgroup_file_write+0x7c/0x180
[c000000018d97cf0] [c0000000000e76b8] .vfs_write+0xe8/0x1b0
[c000000018d97d90] [c0000000000e810c] .sys_write+0x4c/0x90
[c000000018d97e30] [c00000000000852c] syscall_exit+0x0/0x40
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Assigning initial values of `0' is redundant when loading a new CCID structure,
since in net/dccp/ccid.c the entire CCID structure is zeroed out prior to
initialisation in ccid_new():
struct ccid {
struct ccid_operations *ccid_ops;
char ccid_priv[0];
};
// ...
if (rx) {
memset(ccid + 1, 0, ccid_ops->ccid_hc_rx_obj_size);
if (ccid->ccid_ops->ccid_hc_rx_init != NULL &&
ccid->ccid_ops->ccid_hc_rx_init(ccid, sk) != 0)
goto out_free_ccid;
} else {
memset(ccid + 1, 0, ccid_ops->ccid_hc_tx_obj_size);
/* analogous to the rx case */
}
This patch therefore removes the redundant assignments. Thanks to Arnaldo for
the inspiration.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes `unaligned (read) access' errors of the type
Kernel unaligned access at TPC[100f970c] dccp_parse_options+0x4f4/0x7e0 [dccp]
Kernel unaligned access at TPC[1011f2e4] ccid3_hc_tx_parse_options+0x1ac/0x380 [dccp_ccid3]
Kernel unaligned access at TPC[100f9898] dccp_parse_options+0x680/0x880 [dccp]
by using the get_unaligned macro for parsing options.
Commiter note: Preserved the sparse __be{16,32} annotations.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds support for converting the 11 currently defined Reset codes into system
error numbers, which are stored in sk_err for further interpretation.
This makes the externally visible API behaviour similar to TCP, since a client
connecting to a non-existing port will experience ECONNREFUSED.
* Code 0, Unspecified, is interpreted as non-error (0);
* Code 1, Closed (normal termination), also maps into 0;
* Code 2, Aborted, maps into "Connection reset by peer" (ECONNRESET);
* Code 3, No Connection and
Code 7, Connection Refused, map into "Connection refused" (ECONNREFUSED);
* Code 4, Packet Error, maps into "No message of desired type" (ENOMSG);
* Code 5, Option Error, maps into "Illegal byte sequence" (EILSEQ);
* Code 6, Mandatory Error, maps into "Operation not supported on transport endpoint" (EOPNOTSUPP);
* Code 8, Bad Service Code, maps into "Invalid request code" (EBADRQC);
* Code 9, Too Busy, maps into "Too many users" (EUSERS);
* Code 10, Bad Init Cookie, maps into "Invalid request descriptor" (EBADR);
* Code 11, Aggression Penalty, maps into "Quota exceeded" (EDQUOT)
which makes sense in terms of using more than the `fair share' of bandwidth.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes the following problem: client connects to peer which has no DCCP
enabled or loaded; ICMP error messages ("Protocol Unavailable") can be seen
on the wire, but the application hangs. Reason: ICMP packets don't get through
to dccp_v4_err.
When reporting errors, a sequence number check is made for the DCCP packet
that had caused an ICMP error to arrive.
Such checks can not be made if the socket is in state LISTEN, RESPOND (which
in the implementation is the same as LISTEN), or REQUEST, since update_gsr()
has not been called in these states, hence the sequence window is 0..0.
This patch fixes the problem by adding the REQUEST state as another exemption
to the window check. The error reporting now works as expected on connecting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
This fixes a problem when analysing erroneous packets in dccp_v{4,6}_err:
* dccp_hdr_seq currently takes an skb
* however, the transport headers in the skb are shifted, due to the
preceding IPv4/v6 header.
Fixed for v4 and v6 by changing dccp_hdr_seq to take a struct dccp_hdr as
argument. Verified that the correct sequence number is now reported in the
error handler.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix this uml building error:
arch/um/drivers/ubd_kern.c: In function 'do_ubd_request':
arch/um/drivers/ubd_kern.c:1118: error: implicit declaration of function
'sg_page'
arch/um/drivers/ubd_kern.c:1118: warning: passing argument 6 of
'prepare_request' makes pointer from integer without a cast
make[1]: *** [arch/um/drivers/ubd_kern.o] Error 1
make: *** [arch/um/drivers] Error 2
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Add sg_init_table() call as well.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Fix this error (i386 !SMP build):
arch/x86/lguest/boot.c: In function lguest_init:
arch/x86/lguest/boot.c:1059: error: pm_power_off undeclared (first use in this function)
by including linux/pm.h.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.
Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
drivers/isdn/sc/shmem.c: In function 'memcpy_toshmem':
drivers/isdn/sc/shmem.c:54: warning: passing argument 1 of 'memcpy_toio' makes pointer from integer without a cast
Also, remove some unneeded braces, and add some useful whitespace.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
The latest sg changes introduce the following build errors on AVR32:
include/asm/dma-mapping.h: In function ‘dma_map_sg’:
include/asm/dma-mapping.h:220: error: implicit declaration of function ‘sg_page’
include/asm/dma-mapping.h:220: error: invalid operands to binary -
include/asm/dma-mapping.h:221: error: implicit declaration of function ‘sg_virt’
include/asm/dma-mapping.h:221: warning: assignment makes pointer from integer without a cast
include/asm/dma-mapping.h: In function ‘dma_sync_sg_for_device’:
include/asm/dma-mapping.h:330: warning: passing argument 2 of ‘dma_cache_sync’ makes pointer from integer without a cast
Fix it by including the correct header file, i.e. linux/scatterlist.h
instead of asm/scatterlist.h.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Do a full scan of the directory to try and be a bit more proactive,
instead of waiting for things to break.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Looks like the MAP_FIXED case is using the wrong address hint. I'd
expect the comment "don't mess with it" means pass the request
straight on through, not change the address requested to -ENOMEM.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case the "multiple tables" config option is y, the ip_fib_local_table
is not a variable, but a macro, that calls fib_get_table(RT_TABLE_LOCAL).
Some code uses this "variable" *3* times in one place, thus implicitly
making 3 calls. Fix it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inconsistent prototype and real type for functions may have worse
consequences, than those for variables, so move them into a header.
Since they are used privately in net/core, make this file reside in
the same place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some are already declared in include/linux/netdevice.h, while
some others (xfrm ones) need to be declared.
The driver/net/rrunner.c just uses same extern as well, so
cleanup it also.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tcp_minshall_update() function is called in exactly one place, and is
passed an unsigned integer for the mss_len argument. Make the sign of the
argument match the sign of the passed variable in order to eliminate an
unneeded implicit type cast and a mixed sign comparison in
tcp_minshall_update().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some places, the result of skb_headroom() is compared to an unsigned
integer, and in others, the result is compared to a signed integer. Make
the comparisons consistent and correct.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix one more user of netiff_subqueue_stopped. To check for the
queue id one must use the __netiff_subqueue_stoped call.
This run out of my sight when I made the:
668f895a85
[NET]: Hide the queue_mapping field inside netif_subqueue_stopped
commit :(
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When GRE tunnel is in NBMA mode, this patch allows an application to use
a PF_PACKET socket to:
- send a packet to specific NBMA address with sendto()
- use recvfrom() to receive packet and check which NBMA address it came from
This is required to implement properly NHRP over GRE tunnel.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both are equal, except for the list to be traversed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert to original netlink behavior. Do not reply with ACK if the
netlink dump has bees successfully started.
libnl has been broken by the cd40b7d398
The following command reproduce the problem:
/nl-route-get 192.168.1.1
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben stepped down from VLAN maintainership due to a lack of time, add
myself as new maintainer.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like UDP.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Leandro Melo de Sales <leandroal@gmail.com>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch is big. Really big. You just won't believe how vastly hugely
mindbogglingly big it is. I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.
But it's all good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a port type definition for the Freescale UART driver ports (mcf.c).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove old definitions of the timer function pointers.
Add definitions of the common hardware timer functions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Williams