wakeup preemption fix: do not make it dependent on p->prio.
Preemption purely depends on ->vruntime.
This improves preemption in mixed-nice-level workloads.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove PREEMPT_RESTRICT. (this is a separate commit so that any
regression related to the removal itself is bisectable)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PREEMPT_RESTRICT was a method aimed at reducing the amount of wakeup
related preemption. It has a disadvantage though, it can prevent
legitimate wakeups if a task is 'unlucky' to be hit too early by a tick
that clears peer_preempt.
Now that the wakeup preemption has been cleaned up we dont seem to have
excessive preemptions anymore, so this feature can be turned off. (and
removed in the next patch)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1) hardcoded 1000000000 value is used five times in places where
NSEC_PER_SEC might be more readable.
2) A conversion from nsec to msec uses the hardcoded 1000000 value,
which is a candidate for NSEC_PER_MSEC.
no code changed:
text data bss dec hex filename
44359 3326 36 47721 ba69 sched.o.before
44359 3326 36 47721 ba69 sched.o.after
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yanmin Zhang reported an aim7 regression and bisected it down to:
| commit 38ad464d41
| Author: Ingo Molnar <mingo@elte.hu>
| Date: Mon Oct 15 17:00:02 2007 +0200
|
| sched: uniform tunings
|
| use the same defaults on both UP and SMP.
fix this by reintroducing similar SMP tunings again. This resolves
the regression.
(also update the comments to match the ilog2(nr_cpus) tuning effect)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since powerpc started using CONFIG_GENERIC_CLOCKEVENTS, the
deterministic CPU accounting (CONFIG_VIRT_CPU_ACCOUNTING) has been
broken on powerpc, because we end up counting user time twice: once in
timer_interrupt() and once in update_process_times().
This fixes the problem by pulling the code in update_process_times
that updates utime and stime into a separate function called
account_process_tick. If CONFIG_VIRT_CPU_ACCOUNTING is not defined,
there is a version of account_process_tick in kernel/timer.c that
simply accounts a whole tick to either utime or stime as before. If
CONFIG_VIRT_CPU_ACCOUNTING is defined, then arch code gets to
implement account_process_tick.
This also lets us simplify the s390 code a bit; it means that the s390
timer interrupt can now call update_process_times even when
CONFIG_VIRT_CPU_ACCOUNTING is turned on, and can just implement a
suitable account_process_tick().
account_process_tick() now takes the task_struct * as an argument.
Tested both with and without CONFIG_VIRT_CPU_ACCOUNTING.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the delay accounting regression introduced by commit
75d4ef16a6. rq no longer has sched_info
data associated with it. task_struct sched_info structure is used by delay
accounting to provide back statistics to user space.
also remove direct use of sched_clock() (which is not a valid thing to
do anymore) and use rq->clock instead.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
we lost the sched_min_granularity tunable to a clever optimization
that uses the sched_latency/min_granularity ratio - but the ratio
is quite unintuitive to users and can also crash the kernel if the
ratio is set to 0. So reintroduce the min_granularity tunable,
while keeping the ratio maintained internally.
no functionality changed.
[ mingo@elte.hu: some fixlets. ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a few comments to place_entity(). No code changed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
vslice was missing a factor NICE_0_LOAD, as weight is in
weight*NICE_0_LOAD units.
the effect of this bug was larger initial slices and
thus latency-noisier forks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's make immediately obvious from where sysctl comes from and messages
itself more noticeable.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following functions can now become static again:
- get_futex_key()
- get_futex_key_refs()
- drop_futex_key_refs()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do not allow processes to clear their TIF_SIGPENDING if TIF_FREEZE is set,
so that they will not race with the freezer (like mysqld does, for example).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@suspend2.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fix style of swap() macro in kernel/sched_fair.c.
( this macro should eventually move to a general header, as ext3 uses
a similar construct too. )
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds a cpu.usage file to the CFS cgroup that reports CPU usage in
milliseconds for that cgroup's tasks
[ mingo@elte.hu: style cleanups. ]
Signed-off-by: Paul Menage <menage@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra noticed that the rcu_head object need not be present
in every cfs_rq of a group. Move it to the task_group structure
instead.
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch:
commit 9b5b77512d
Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Date: Mon Oct 15 17:00:09 2007 +0200
sched: clean up code under CONFIG_FAIR_GROUP_SCHED
Introduced an assumption of the existence of CPU0 via this line
cfs_rq = tg->cfs_rq[0];
If you have no CPU0, that will be NULL. The fix seems to be just to
take whatever cfs_rq queue comes out of the for_each_possible_cpu()
loop, since they're all equally good for the destruction operation.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
keep utime/stime monotonic.
cpustats use utime/stime as a ratio against sum_exec_runtime, as a
consequence it can happen - when the ratio changes faster than time
accumulates - that either can be appear to go backwards.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't undef __i386__/__x86_64__ in uml anymore, make sure that (few) places
that required adjusting the ifdefs got those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the hrtimer printk "Switched to high resolution mode .." to
be KERN_DEBUG, rather than KERN_INFO. If users need to see this they
can pass "loglevel" or "debug" on the command line, or check dmesg.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
kernel/hrtimer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
This makes sure printk format strings contain no more than a single
line.
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the unused
EXPORT_SYMBOL_GPL(tick_nohz_get_sleep_length).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix a typo in the __lock_acquire comment.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch removes the unused
EXPORT_SYMBOL_GPL(tick_nohz_get_sleep_length),
which we no long user b/c we no longer build optional modules.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
At the moment, a lot of load balancing code that is irrelevant to non
SMP systems gets included during non SMP builds.
This patch addresses this issue and reduces the binary size on non
SMP systems:
text data bss dec hex filename
10983 28 1192 12203 2fab sched.o.before
10739 28 1192 11959 2eb7 sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At the moment, balance_tasks() provides low level functionality for both
move_tasks() and move_one_task() (indirectly) via the load_balance()
function (in the sched_class interface) which also provides dual
functionality. This dual functionality complicates the interfaces and
internal mechanisms and makes the run time overhead of operations that
are called with two run queue locks held.
This patch addresses this issue and reduces the overhead of these
operations.
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- replace "cont" with "cgrp" in a few places in the CFS cgroup code,
- use write_uint rather than write for cpu.shares write function
Signed-off-by: Paul Menage <menage@google.com>
Acked-by : Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
profile=sleep only works if CONFIG_SCHEDSTATS is set. This patch notes
the limitation in Documentation/kernel-parameters.txt and prints a
warning at boot-time if profile=sleep is used without CONFIG_SCHEDSTAT.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A full register dump along with stack backtrace would make the
"scheduling while atomic" message more helpful. Use show_regs() instead
of dump_stack() for this. We already know we're atomic in here (that is
why this function was called) so show_regs()'s atomicity expectations
are guaranteed.
Also, modify the output of the "BUG: scheduling while atomic:" header a
bit to keep task->comm and task->pid together and preempt_count() after
them.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
clean up sched_domain_debug().
this also shrinks the code a bit:
text data bss dec hex filename
50474 4306 480 55260 d7dc sched.o.before
50404 4306 480 55190 d796 sched.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jeff Dike noticed that wait_for_completion_interruptible()'s prototype
had a mismatched fastcall.
Fix this by removing the fastcall attributes from all the completion APIs.
Found-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
commit 029190c515 (cpuset
sched_load_balance flag) was not tested SCHED_DEBUG enabled as
committed as it dereferences NULL when used and it reordered
the sysctl registration to cause it to never show any domains
or their tunables.
Fixes:
1) restore arch_init_sched_domains ordering
we can't walk the domains before we build them
presently we register cpus with empty directories (no domain
directories or files).
2) make unregister_sched_domain_sysctl do nothing when already unregistered
detach_destroy_domains is now called one set of cpus at a time
unregister_syctl dereferences NULL if called with a null.
While the the function would always dereference null if called
twice, in the previous code it was always called once and then
was followed a register. So only the hidden bug of the
sysctl_root_table not being allocated followed by an attempt to
free it would have shown the error.
3) always call unregister and register in partition_sched_domains
The code is "smart" about unregistering only needed domains.
Since we aren't guaranteed any calls to unregister, always
unregister. Without calling register on the way out we
will not have a table or any sysctl tree.
4) warn if register is called without unregistering
The previous table memory is lost, leaving pointers to the
later freed memory in sysctl and leaking the memory of the
tables.
Before this patch on a 2-core 4-thread box compiled for SMT and NUMA,
the domains appear empty (there are actually 3 levels per cpu). And as
soon as two domains a null pointer is dereferenced (unreliable in this
case is stack garbage):
bu19a:~# ls -R /proc/sys/kernel/sched_domain/
/proc/sys/kernel/sched_domain/:
cpu0 cpu1 cpu2 cpu3
/proc/sys/kernel/sched_domain/cpu0:
/proc/sys/kernel/sched_domain/cpu1:
/proc/sys/kernel/sched_domain/cpu2:
/proc/sys/kernel/sched_domain/cpu3:
bu19a:~# mkdir /dev/cpuset
bu19a:~# mount -tcpuset cpuset /dev/cpuset/
bu19a:~# cd /dev/cpuset/
bu19a:/dev/cpuset# echo 0 > sched_load_balance
bu19a:/dev/cpuset# mkdir one
bu19a:/dev/cpuset# echo 1 > one/cpus
bu19a:/dev/cpuset# echo 0 > one/sched_load_balance
Unable to handle kernel paging request for data at address 0x00000018
Faulting instruction address: 0xc00000000006b608
NIP: c00000000006b608 LR: c00000000006b604 CTR: 0000000000000000
REGS: c000000018d973f0 TRAP: 0300 Not tainted (2.6.23-bml)
MSR: 9000000000009032 <EE,ME,IR,DR> CR: 28242442 XER: 00000000
DAR: 0000000000000018, DSISR: 0000000040000000
TASK = c00000001912e340[1987] 'bash' THREAD: c000000018d94000 CPU: 2
..
NIP [c00000000006b608] .unregister_sysctl_table+0x38/0x110
LR [c00000000006b604] .unregister_sysctl_table+0x34/0x110
Call Trace:
[c000000018d97670] [c000000007017270] 0xc000000007017270 (unreliable)
[c000000018d97720] [c000000000058710] .detach_destroy_domains+0x30/0xb0
[c000000018d977b0] [c00000000005cf1c] .partition_sched_domains+0x1bc/0x230
[c000000018d97870] [c00000000009fdc4] .rebuild_sched_domains+0xb4/0x4c0
[c000000018d97970] [c0000000000a02e8] .update_flag+0x118/0x170
[c000000018d97a80] [c0000000000a1768] .cpuset_common_file_write+0x568/0x820
[c000000018d97c00] [c00000000009d95c] .cgroup_file_write+0x7c/0x180
[c000000018d97cf0] [c0000000000e76b8] .vfs_write+0xe8/0x1b0
[c000000018d97d90] [c0000000000e810c] .sys_write+0x4c/0x90
[c000000018d97e30] [c00000000000852c] syscall_exit+0x0/0x40
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As it is some callers of synchronize_irq rely on memory barriers
to provide synchronisation against the IRQ handlers. For example,
the tg3 driver does
tp->irq_sync = 1;
smp_mb();
synchronize_irq();
and then in the IRQ handler:
if (!tp->irq_sync)
netif_rx_schedule(dev, &tp->napi);
Unfortunately memory barriers only work well when they come in
pairs. Because we don't actually have memory barriers on the
IRQ path, the memory barrier before the synchronize_irq() doesn't
actually protect us.
In particular, synchronize_irq() may return followed by the
result of netif_rx_schedule being made visible.
This patch (mostly written by Linus) fixes this by using spin
locks instead of memory barries on the synchronize_irq() path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc for auditsc parameter changes.
Warning(linux-2.6.23-git17//kernel/auditsc.c:1623): No description found for parameter 'dentry'
Warning(linux-2.6.23-git17//kernel/auditsc.c:1666): No description found for parameter 'dentry'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gabriel C reported that modprobing appletalk on current git gives a
warning in dmesg :
"sysctl table check failed: /net/appletalk .3.7 procname does not match binary path procname"
Oops. My apologies it appears I made a mistake when creating my table
to check up on sysctl values.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KVM clears it by itself now, and for s390 this is plain wrong.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
New kind of audit rule predicates: "object is visible in given subtree".
The part that can be sanely implemented, that is. Limitations:
* if you have hardlink from outside of tree, you'd better watch
it too (or just watch the object itself, obviously)
* if you mount something under a watched tree, tell audit
that new chunk should be added to watched subtrees
* if you umount something in a watched tree and it's still mounted
elsewhere, you will get matches on events happening there. New command
tells audit to recalculate the trees, trimming such sources of false
positives.
Note that it's _not_ about path - if something mounted in several places
(multiple mount, bindings, different namespaces, etc.), the match does
_not_ depend on which one we are using for access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Weird I thought I had written the makefile so this would be handled. Oh
well this should fix it.
Sorry about that.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the loop style of copy_data_pages() to remove a duplicate condition.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Ingo Molnar