The final version of fusb300 controller adds EPSET0_STL_CLR
for clearing EP0 stall and also removes EPSET0_EPn_TX0BYTE.
fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8
Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds the support for 'get_unmapped_area' in UVC gadget
which is called when the 'mmap' system call is executed on MMUless
architectures.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This patch reworks the videobuffer management logic present in the UVC
webcam gadget and ports it to use the "more apt" videobuf2 framework for
video buffer management.
To support routing video data captured from a real V4L2 video capture
device with a "zero copy" operation on videobuffers (as they pass from
the V4L2 domain to UVC domain via a user-space application), we need to
support USER_PTR IO method at the UVC gadget side.
So the V4L2 capture device driver can still continue to use MMAP IO
method and now the user-space application can just pass a pointer to the
video buffers being dequeued from the V4L2 device side while queueing
them at the UVC gadget end. This ensures that we have a "zero-copy"
design as the videobuffers pass from the V4L2 capture device to the UVC
gadget.
Note that there will still be a need to apply UVC specific payload
headers on top of each UVC payload data, which will still require a copy
operation to be performed in the 'encode' routines of the UVC gadget.
This patch also addresses one issue found out while porting the UVC
gadget to videobuf2 framework:
- In case the usb requests queued by the gadget get completed
with a status of -ESHUTDOWN (disconnected from host),
the queue of videobuf2 should be cancelled to ensure that the
application space daemon is not left in a state waiting for
a vb2 to be successfully absorbed at the USB side.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The origianl understanding of clock is wrong. The UDC controller
only have one clock input.
Passing clock name by pdata is wrong. The clock is defined by device
iteself.
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The origianl understanding of clock is wrong. The UDC controller
only have one clock input.
Passing clock name by pdata is wrong. The clock is defined by device
iteself.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
fix the following sparse warnings:
drivers/usb/gadget/mv_u3d_core.c:223:20: warning: context imbalance in 'mv_u3d_done' - unexpected unlock
drivers/usb/gadget/mv_u3d_core.c:1562:25: warning: context imbalance in 'mv_u3d_handle_setup_packet' - unexpected unlock
Note that the non-trivial sparse warnings
are left out of this commit due to lack of
HW to test:
drivers/usb/gadget/mv_u3d_core.c:906:42: warning: incorrect type in argument 2 (different address spaces)
drivers/usb/gadget/mv_u3d_core.c:906:42: expected void [noderef] <asn:2>*<noident>
drivers/usb/gadget/mv_u3d_core.c:906:42: got unsigned int *<noident>
Signed-off-by: Felipe Balbi <balbi@ti.com>
fix the following sparse warnings:
drivers/usb/gadget/mv_udc_core.c:1850:6: warning: symbol 'irq_process_reset' was not declared. Should it be static?
drivers/usb/gadget/mv_udc_core.c:247:9: warning: context imbalance in 'done' - unexpected unlock
drivers/usb/gadget/mv_udc_core.c:1692:25: warning: context imbalance in 'handle_setup_packet' - unexpected unlock
Note that there are still other sparse warnings
which aren't trivial to fix, so I left them out:
drivers/usb/gadget/mv_udc_core.c:848:34: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/gadget/mv_udc_core.c:848:34: expected void const volatile [noderef] <asn:2>*addr
drivers/usb/gadget/mv_udc_core.c:848:34: got unsigned int *<noident>
drivers/usb/gadget/mv_udc_core.c:849:42: warning: incorrect type in argument 2 (different address spaces)
drivers/usb/gadget/mv_udc_core.c:849:42: expected void volatile [noderef] <asn:2>*addr
drivers/usb/gadget/mv_udc_core.c:849:42: got unsigned int *<noident>
Acked-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
fix the following sparse warning:
drivers/usb/gadget/dummy_hcd.c:1912:12: warning: symbol 'usb3_bos_desc' was not declared. Should it be static?
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
fix the following sparse warnings:
drivers/usb/gadget/net2280.c:2063:13: warning: Using plain integer as NULL pointer
drivers/usb/gadget/net2280.c:2321:68: warning: Using plain integer as NULL pointer
drivers/usb/gadget/net2280.c:2349:68: warning: Using plain integer as NULL pointer
drivers/usb/gadget/net2280.c:2371:68: warning: Using plain integer as NULL pointer
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Fix the following sparse warnings:
drivers/usb/gadget/net2272.c:916:13: warning: Using plain integer as NULL pointer
drivers/usb/gadget/net2272.c:1624:9: warning: Using plain integer as NULL pointer
drivers/usb/gadget/net2272.c:1552:30: warning: right shift by bigger than source value
Note that the last warning is an actual bug,
since ep->dma is a one bit value which is
shifted by one bit in code.
Signed-off-by: Felipe Balbi <balbi@ti.com>
this driver compiles fine everywhere which
means we can use linux-next to compile it
for us frequently.
By dropping the arch dependency, we also
ensure driver writers don't add virtual
arch-depdencies to the driver by e.g. using
the wrong headers.
While at that, fix Marvell's USB3 PHY dependency,
that's the driver which depends on CPU_MM3, not
mv_u3d_core.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Fix the following sparse warnings:
drivers/usb/gadget/mv_u3d_core.c: In function ‘mv_u3d_ep_queue’:
drivers/usb/gadget/mv_u3d_core.c:812:2: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:822:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:823:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:823:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c: In function ‘mv_u3d_ep_dequeue’:
drivers/usb/gadget/mv_u3d_core.c:905:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c: In function ‘mv_u3d_probe’:
drivers/usb/gadget/mv_u3d_core.c:1840:3: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:1855:51: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:1855:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/usb/gadget/mv_u3d_core.c:1858:53: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/usb/gadget/mv_u3d_core.c:1858:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/usb/gadget/mv_u3d_core.c: In function ‘mv_u3d_irq_process_tr_complete’:
drivers/usb/gadget/mv_u3d_core.c:163:21: warning: ‘remaining_length’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/usb/gadget/mv_u3d_core.c:125:28: note: ‘remaining_length’ was declared here
Signed-off-by: Felipe Balbi <balbi@ti.com>
USB_GADGET_{DUAL,SUPER}SPEED symbols have
been removed by commit 85b8614 (usb: gadget:
get rid of USB_GADGET_{DUAL,SUPER}SPEED), for
some reason mv_u3d_core was lost.
Remove those selects now.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Make mv_u3d_pm_ops static because mv_u3d_pm_ops is not exported.
Also, CONFIG_PM_SLEEP is used to remove unnecessary ifdefs.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
PHY layer no longer returns NULL. It will
return -ENXIO when PHY layer isn't enabled
and we can use that to bail out instead of
request a probe deferral.
Signed-off-by: Felipe Balbi <balbi@ti.com>
"req->length" is a capped version of "data->length".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
As per the USB3.0 specs, the bandwidth requirements of a UVC's video
streaming endpoint will change to support super-speed. These changes
will be dependent on whether the UVC video streaming endpoint is Bulk or
Isochronous:
- If video streaming endpoint is Isochronous:
As per Section 4.4.8.2 (Isochronous Transfer Bandwidth Requirements)
of the USB3.0 specs:
A SuperSpeed isochronous endpoint can move up to three burst
transactions of up to 16 maximum sized packets (3 * 16 * 1024 bytes)
per service interval.
- If video streaming endpoint is Bulk:
As per 4.4.6.1 (Bulk Transfer Data Packet Size) of the USB3.0 specs:
An endpoint for bulk transfers shall set the maximum data packet
payload size in its endpoint descriptor to 1024 bytes. It also
specifies the burst size that the endpoint can accept from or
transmit on the SuperSpeed bus. The allowable burst size for a bulk
endpoint shall be in the range of 1 to 16.
So, in the Isochronous case, we can define the USB request's buffer to
be equal to = (Maximum packet size) * (bMaxBurst + 1) * (Mult + 1), so
that the UDC driver can try to send out this buffer in one Isochronous
service interval.
The same computation will hold good for the Bulk case as the Mult
value is 0 here and we can have a USB request buffer of maximum
16 * 1024 bytes size, which can be sent out by the UDC driver as
per the Bulk bandwidth allocation on the USB3 bus.
This patch adds the above-mentioned support and is also USB2.0 backward
compliant.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds the support in UVC webcam gadget design for providing
USB_GADGET_DELAYED_STATUS in response to a set_interface(alt setting 1)
command issue by the Host.
The current UVC webcam gadget design generates a STREAMON event
corresponding to a set_interface(alt setting 1) command from the Host.
This STREAMON event will eventually be routed to a real V4L2 device.
To start video streaming, it may be required to perform some register
writes to a camera sensor device over slow external busses like I2C or
SPI. So, it makes sense to ensure that we delay the STATUS stage of the
set_interface (alt setting 1) command.
Otherwise, a lot of ISOC IN tokens sent by the Host will be replied to
by zero-length packets by the webcam device. On certain Hosts this may
even lead to ISOC URBs been cancelled from the Host side.
So, as soon as we finish doing all the "streaming" related stuff on the
real V4L2 device, we call a STREAMON ioctl on the UVC side and from here
we call the 'usb_composite_setup_continue' function to complete the
status stage of the set_interface(alt setting 1) command.
Further, we need to ensure that we queue no video buffers on the UVC
webcam gadget, until we de-queue a video buffer from the V4L2 device.
So, the application should call the STREAMON on UVC side only when it
has dequeued sufficient buffers from the V4L2 side and queued them to
the UVC gadget.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
As per the UVC compliance test suite's assertion 6.1.25, the `iFunction`
field of the Interface Association Descriptor (IAD) should the match the
`iInterface` field of the standard Video Control (VC) Interface Descriptor for
this Video Interface Collection (VIC).
This mandatory case is captured in section 3.11 of the
USB Video Class Compliance specification revision 1.1
This patch fixes this test assertion's failure and has been tested on
Linux FC16, WinXP, WIN7 and WIN8 High speed and Super Speed hosts
for successful enumeration.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
[Merged the association and control string descriptors]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
As per UVC compliance test specification's assertion number 6.3.90
related to 'Standard VS Isochronous Video Data Endpoint Descriptor Assertions',
the bits D3..2 of 'bmAttributes' field of Standard VS Isochronous Video Data
Endpoint Descriptor should be 01 (binary) to indicate that the
synchronization type is ASYNCHRONOUS.
This mandatory requirement has been captured in section 3.10.1.1 of the UVC
Video Class Specification version 1.1
This patch adds a fix for the same.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Call the appropriate usb_ep_autoconf*() function depending on the device
speed, and pass it the corresponding streaming endpoint.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Compute the multiplier from the maximum packet size based on the speed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The descriptors are identical, there's no need to have several copies of
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Let's keep the code consistent, people might want to read it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Descriptive names make the code more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
gadget drivers shouldn't touch req->dma at all,
since UDC drivers are the ones required to handle
mapping and unmapping of the request buffer.
Remove references to DMA_ADDR_INVALID so we don't
creat false expectations to gadget driver writers.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
DMA_ADDR_INVALID isn't (and shouldn't) be used
anymore, let's remove it.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
since commit d93e260 (usb: gadget: s3c-hsudc: use udc_start and udc_stop
functions) the 'driver' parameter has been deleted from
s3c_hsudc_stop_activity() but its documentation was left outdated. This
patch deletes the comment since it makes no sense anymore.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.
[ kishon@ti.com : fixed a linking error due
to original patch forgetting to change
drivers/usb/Makefile ]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
module_platform_driver_probe() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
current code only allows the file owner (usually
root) to read current_speed and maximum_speed
sysfs files. Let anyone read those.
Signed-off-by: Felipe Balbi <balbi@ti.com>
now that no UDC driver touches gadget.dev.release
we can assign our release function to it without
being afraid of breaking anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Yuan-Hsin Chen