The CPU's dma_flush_range() operation needs to clean+invalidate the
given memory area if the cache is in writeback mode, or do just the
invalidate part if the cache is in writethrough mode, but the current
proc-arm{925,926,940,946} (incorrectly) do a cache clean in the
latter case. This patch fixes that.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Martin Michlmayr reported that fuse complains:
ERROR: "copy_page" [fs/fuse/fuse.ko] undefined!
so export the needed function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
irqs.h:
* rename IRQ_LOCOMO_SPI_OVRN to IRQ_LOCOMO_SPI_REND
locomo.h:
* add some definition for locomo spi controller
* correct some errors
locomo.c:
* correct some errors
* add set_type for locomo gpio irq chip
Signed-off-by: Thomas Kunze <thommycheck@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: disable mwait for AMD family 10H/11H CPUs
x86: fix crash on cpu hotplug on pat-incapable machines
x86: remove mwait capability C-state check
The previous revert of 0c07ee38c9 left
out the mwait disable condition for AMD family 10H/11H CPUs.
Andreas Herrman said:
It depends on the CPU. For AMD CPUs that support MWAIT this is wrong.
Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings then
depend on a clock divisor and current Pstate of the core.
If all cores of a processor are in halt state (C1) the processor can
enter the C1E (C1 enhanced) state. If mwait is used this will never
happen.
Thus HLT saves more power than MWAIT here.
It might be best to switch off the mwait flag for these AMD CPU
families like it was introduced with commit
f039b75471 (x86: Don't use MWAIT on AMD
Family 10)
Re-add the AMD families 10H/11H check and disable the mwait usage for
those.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pat_disable() is __init, which means it goes away after booting is complete.
Unfortunately it is used by the hotplug code if the machine is not
pat-capable, causing a crash.
Fix by marking pat_disable() as __cpuinit.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Vegard Nossum reports:
| powertop shows between 200-400 wakeups/second with the description
| "<kernel IPI>: Rescheduling interrupts" when all processors have load (e.g.
| I need to run two busy-loops on my 2-CPU system for this to show up).
|
| The bisect resulted in this commit:
|
| commit 0c07ee38c9
| Date: Wed Jan 30 13:33:16 2008 +0100
|
| x86: use the correct cpuid method to detect MWAIT support for C states
remove the functional effects of this patch and make mwait unconditional.
A future patch will turn off mwait on specific CPUs where that causes
power to be wasted.
Bisected-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This fixes the missing ram regression reported by
Mikael Pettersson <mikpe@it.uu.se>, much thanks for
all of this help in diagnosing this.
The second argument to lmb_reserve() is a size,
not an end address bounds.
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
nfs4_drop_state_owner() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv3 get_sb operations call into the LSM layer to set security options passed
from userspace. NFSv4 hooks were not originally added since it was reasonably
late in the merge window and NFSv3 was the only thing that had regressed (v4
has never supported any LSM options)
This patch makes NFSv4 call into the LSM to set security options rather than
just blindly dropping them with no notice to the user as happens today. This
patch was tested in a simple NFSv4 environment with the context= option and
appeared to work as expected.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If decode_compound_hdr_arg() returns a resource error, then we cannot
proceed to process the callback. Return a 'GARBAGE_ARGS' rpc-level error to
the caller instead.
If, however, the minor version field is incorrect, then we need to
propagate the resulting NFS4ERR_MINOR_VERS_MISMATCH error back as the
compound status field (setting the nops field to 0).
Finally, if encode_compound_hdr_res() returns an error, we need to return
an RPC_SYSTEM_ERR to the caller.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When called from nfs_flush_incompatible, the req is not locked, so
req->wb_page might be set to NULL before it is used by PageWriteback.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Both the 'noac' and 'actimeo=0' mount options should ensure that attributes
are not cached, however a bug in nfs_attribute_timeout() means that
currently, the attributes may in fact get cached for up to one jiffy. This
has been seen to cause corruption in some applications.
The reason for the bug is that the time_in_range() test returns 'true' as
long as the current time lies between nfsi->read_cache_jiffies and
nfsi->read_cache_jiffies + nfsi->attrtimeo. In other words, if jiffies
equals nfsi->read_cache_jiffies, then we still cache the attribute data.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] macintosh: Replace deprecated __initcall with device_initcall
[POWERPC] cell: Fix section mismatches in io-workarounds code
[POWERPC] spufs: Fix compile error
[POWERPC] Fix uninitialized variable bug in copy_{to|from}_user
[POWERPC] Add null pointer check to of_find_property
[POWERPC] vmemmap fixes to use smaller pages
[POWERPC] spufs: Fix pointer reference in find_victim
[POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
[POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
[POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.
[POWERPC] 86xx: mpc8610_hpcd: fix second serial port
[POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
[POWERPC] 85xx: Add 8568 PHY workarounds to board code
[POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: update transaction t_state to T_COMMIT fix
ext4: Retry block allocation if new blocks are allocated from system zone.
ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems
ext4: fix typos in messages and comments (journalled -> journaled)
ext4: fix synchronization of quota files in journal=data mode
ext4: Fix mount messages when quota disabled
ext4: correct mount option parsing to detect when quota options can be changed
This patch fixes a build bug on m68k - gcc decides to emit a call to the
strlen library function, which we don't implement.
More importantly - my previous patch "init: don't lose initcall return
values" (commit e662e1cfd4) had introduced
potential buffer overflow by wrong calculation of string accumulator
size.
Use strlcat() instead, fixing both bugs.
Many thanks Andreas Schwab and Geert Uytterhoeven for helping
to catch and fix the bug.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One function to just loop over the entries, one function to actually do
the call and the associated debugging code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Everybody wants to pass it a function pointer, and in fact, that is what
you _must_ pass it for it to make sense (since it knows that ia64 and
ppc64 use descriptors for function pointers and fetches the actual
address from there).
So don't make the argument be a 'unsigned long' and force everybody to
add a cast.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Updating the current transaction's t_state is protected by j_state_lock. We
need to do the same when updating the t_state to T_COMMIT.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the block allocator gets blocks out of system zone ext4 calls
ext4_error. But if the file system is mounted with errors=continue
retry block allocation. We need to mark the system zone blocks as
in use to make sure retry don't pick them again
System zone is the block range mapping block bitmap, inode bitmap and inode
table.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Enabling the BKL to be lockdep tracked uncovered the following
upstream kernel bug in the tty code, which caused a BKL
reference leak:
================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
dmesg/3121 is leaving the kernel with locks still held!
1 lock held by dmesg/3121:
#0: (kernel_mutex){--..}, at: [<c02f34d9>] opost+0x24/0x194
this might explain some of the atomicity warnings and crashes
that -tip tree testing has been experiencing since the BKL
was converted back to a spinlock.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch aims to fix a performance issue for the syscall
personality(PER_LINUX32).
On IA-64 box, the syscall personality (PER_LINUX32) has poor performance
because it failed to find the Linux/x86 execution domain. Then it tried
to load the kernel module however it failed always and it used the default
execution domain PER_LINUX instead. Requesting kernel modules is very
expensive. It caused the performance issue. (see the function
lookup_exec_domain in kernel/exec_domain.c).
To resolve the issue, execution domain Linux/x86 is always registered in
initialization time for IA-64 architecture.
Signed-off-by: Xiaolan Huang <xiaolan.huang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] show_interrupts: prevent cpu hotplug when walking cpu_online_map.
[S390] smp: __smp_call_function_map vs cpu_online_map fix.
[S390] tape: Use ccw_dev_id to build cdev_id.
[S390] dasd: fix timeout handling in interrupt handler
[S390] s390dbf: Use const char * for dbf name.
[S390] dasd: Use const in busid functions.
[S390] blacklist.c: removed duplicated include
[S390] vmlogrdr: module initialization function should return negative errors
[S390] sparsemem vmemmap: initialize memmap.
[S390] Remove last traces of cio_msg=.
[S390] cio: Remove CCW_CMD_SUSPEND_RECONN in front of CCW_CMD_SET_PGID.
Now that <asm-generic/ioctl.h> allows overriding of the most commonly
changed macro values, take advantage of that.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Surround all the code withing show_interrupts() with
get/put_online_cpus() to prevent strange results wrt cpu hotplug.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Both smp_call_function() and __smp_call_function_map() access
cpu_online_map. Both functions run with preemption disabled which
protects for cpus going offline. However new cpus can be added and
therefore the cpu_online_map can change unexpectedly.
So use the call_lock to protect against changes to the cpu_online_map
in start_secondary() and all smp_call_* functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To construct the integer containing the information from the bus_id,
it is easier to use the data from ccw_dev_id than to parse the bus_id.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When the dasd_int_handler is called with an error code instead of
an irb, the associated request should be restarted. This handling
was missing from the -ETIMEDOUT case. In fact it should be done in
any case.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We should use const char * for passing the name of the debug feature
around since it will not be changed.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We should use 'const char *' in the busid functions since the
strings are not modified anyway.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Removed duplicated include <asm/cio.h>
in drivers/s390/cio/blacklist.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's just use the generic vmmemmap_alloc_block() function which
always returns initialized memory.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
cio_msg= is gone, also remove it from kernel-parameters.txt.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
CCW_CMD_SUSPEND_RECONN causes a system hang if the cable of a
reserved DASD is disconnected and connected again.
Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The functions time_before, time_before_eq, time_after, and time_after_eq are
more robust for comparing jiffies against other values.
So use the time_after() macro, defined in linux/jiffies.h, which deals with
wrapping correctl
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
show_mem() has no need to print the amount of free swap space manually because
show_free_areas() does this already and is called by the former.
The two outputs only differ in text formatting:
printk("Free swap = %lukB\n", ...);
printk("Free swap: %6ldkB\n", ...);
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Lennert Buytenhek