I must have disabled this due to other bugs which were fixed over
time. And this is needed in order for child devices of "pmu"
to get proper resource values.
Signed-off-by: David S. Miller <davem@davemloft.net>
It's completely superfluous, CONFIG_COMPAT is sufficient.
What this used to be is an umbrella for enabling code shared
by all 32-bit compat binary support types. But with the
removal of SunOS and Solaris support, the only one left is
Linux 32-bit ELF.
Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
Refer to chip as "SPARC" throughout.
Say 32-bit SPARC and 64-bit SPARC rather than mentioning specific
chips such like UltraSPARC, as appropriate.
Remove non-sense help text referring to things that will never appear
on a SPARC system, such as EISA busses etc.
Use "help" instead of "--help--"
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel bugzilla 10273
As reported by Jos van der Ende, ever since commit
5a606b72a4 ("[SPARC64]: Do not ACK an
INO if it is disabled or inprogress.") sun4u interrupts
can get stuck.
What this changset did was add the following conditional to
the various IRQ chip ->enable() handlers on sparc64:
if (unlikely(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)))
return;
which is correct, however it means that special care is needed
in the ->enable() method.
Specifically we must put the interrupt into IDLE state during
an enable, or else it might never be sent out again.
Setting the INO interrupt state to IDLE resets the state machine,
the interrupt input to the INO is retested by the hardware, and
if an interrupt is being signalled by the device, the INO
moves back into TRANSMIT state, and an interrupt vector is sent
to the cpu.
The two sun4v IRQ chip handlers were already doing this properly,
only sun4u got it wrong.
Signed-off-by: David S. Miller <davem@davemloft.net>
On big systems with lots of memory, don't print out too much during
bootup, and make it easy to find if it is continuous.
on 256G 8 sockets system will get
[ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0
[ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs
[ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0
[ffffe20038700000-ffffe200387fffff] potential offnode page_structs
[ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1
[ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2
[ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2
[ffffe20054700000-ffffe200547fffff] potential offnode page_structs
[ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2
[ffffe20070700000-ffffe200707fffff] potential offnode page_structs
[ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3
[ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4
[ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4
[ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs
[ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4
[ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs
[ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5
[ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6
[ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6
[ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs
[ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6
[ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7
instead of a very long print out...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
typical case: four sockets system, every node has 4g ram, and we are using:
memmap=10g$4g
to mask out memory on node1 and node2
when numa is enabled, early_node_mem is used to get node_data and node_bootmap.
if it can not get memory from the same node with find_e820_area(), it will
use alloc_bootmem to get buff from previous nodes.
so check it and print out some info about it.
need to move early_res_to_bootmem into every setup_node_bootmem.
and it takes range that node has. otherwise alloc_bootmem could return addr
that reserved early.
depends on "mm: make reserve_bootmem can crossed the nodes".
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"mm: make reserve_bootmem can crossed the nodes" provides new
reserve_bootmem(), let reserve_bootmem_generic() use that.
reserve_bootmem_generic() is used to reserve initramdisk, so this way
we can make sure even when bootloader or kexec load ranges cross the
node memory boundaries, reserve_bootmem still works.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Export linked list of struct setup_data via debugfs.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add free_early to early reservation mechanism - this way early bootup
failure paths can stop wasting memory.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
disable /dev/mem mmap of RAM with PAT. It makes things safer and
eliminates aliasing. A future improvement would be to avoid the
range_is_allowed duplication.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce GENERIC_FIND_FIRST_BIT and GENERIC_FIND_NEXT_BIT in
lib/Kconfig, defaulting to off. An arch that wants to use the
generic implementation now only has to use a select statement
to include them.
I added an always-y option (X86_CPU) to arch/x86/Kconfig.cpu
and used that to select the generic search functions. This
way ARCH=um SUBARCH=i386 automatically picks up the change
too, and arch/um/Kconfig.i386 can therefore be simplified a
bit. ARCH=um SUBARCH=x86_64 does things differently, but
still compiles fine. It seems that a "def_bool y" always
wins over a "def_bool n"?
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86 has been switched to the generic versions of find_first_bit
and find_first_zero_bit, but the original versions were retained.
This patch just removes the now unused x86-specific versions.
also update UML.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Switch x86_64 to generic find_first_bit. The x86_64-specific
implementation is not removed.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Generic versions of __find_first_bit and __find_first_zero_bit
are introduced as simplified versions of __find_next_bit and
__find_next_zero_bit. Their compilation and use are guarded by
a new config variable GENERIC_FIND_FIRST_BIT.
The generic versions of find_first_bit and find_first_zero_bit
are implemented in terms of the newly introduced __find_first_bit
and __find_first_zero_bit.
This patch does not remove the i386-specific implementation,
but it does switch i386 to use the generic functions by setting
GENERIC_FIND_FIRST_BIT=y for X86_32.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some of those can be written in such a way that the same
inline assembly can be used to generate both 32 bit and
64 bit code.
For ffs and fls, x86_64 unconditionally used the cmov
instruction and i386 unconditionally used a conditional
branch over a mov instruction. In the current patch I
chose to select the version based on the availability
of the cmov instruction instead. A small detail here is
that x86_64 did not previously set CONFIG_X86_CMOV=y.
Improved comments for ffs, ffz, fls and variations.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The versions with inline assembly are in fact slower on the machines I
tested them on (in userspace) (Athlon XP 2800+, p4-like Xeon 2.8GHz, AMD
Opteron 270). The i386-version needed a fix similar to 06024f21 to avoid
crashing the benchmark.
Benchmark using: gcc -fomit-frame-pointer -Os. For each bitmap size
1...512, for each possible bitmap with one bit set, for each possible
offset: find the position of the first bit starting at offset. If you
follow ;). Times include setup of the bitmap and checking of the
results.
Athlon Xeon Opteron 32/64bit
x86-specific: 0m3.692s 0m2.820s 0m3.196s / 0m2.480s
generic: 0m2.622s 0m1.662s 0m2.100s / 0m1.572s
If the bitmap size is not a multiple of BITS_PER_LONG, and no set
(cleared) bit is found, find_next_bit (find_next_zero_bit) returns a
value outside of the range [0, size]. The generic version always returns
exactly size. The generic version also uses unsigned long everywhere,
while the x86 versions use a mishmash of int, unsigned (int), long and
unsigned long.
Using the generic version does give a slightly bigger kernel, though.
defconfig: text data bss dec hex filename
x86-specific: 4738555 481232 626688 5846475 5935cb vmlinux (32 bit)
generic: 4738621 481232 626688 5846541 59360d vmlinux (32 bit)
x86-specific: 5392395 846568 724424 6963387 6a40bb vmlinux (64 bit)
generic: 5392458 846568 724424 6963450 6a40fa vmlinux (64 bit)
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pointed out by Linus: arch/um/Kconfig.x86_64 should
include arch/x86/Kconfig.cpu instead of defining those
symbols itself.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/um/os-Linux/helper.c: In function 'run_helper':
arch/um/os-Linux/helper.c:73: error: 'PATH_MAX' undeclared (first use in this function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus pointed it out that PAT should not depend on NONPROMISC_DEVMEM.
Also make PAT non-default.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell reported that linux-next did not build on powerpc64.
make optimized inlining dependent on architecture opt-in.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
add CONFIG_OPTIMIZE_INLINING=y.
allow gcc to optimize the kernel image's size by uninlining
functions that have been marked 'inline'. Previously gcc was
forced by Linux to always-inline these functions via a gcc
attribute:
#define inline inline __attribute__((always_inline))
Especially when the user has already selected
CONFIG_OPTIMIZE_FOR_SIZE=y this can make a huge difference in
kernel image size (using a standard Fedora .config):
text data bss dec hex filename
5613924 562708 3854336 10030968 990f78 vmlinux.before
5486689 562708 3854336 9903733 971e75 vmlinux.after
that's a 2.3% text size reduction (!).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch fixes section mismatch warnings in unlock_ExtINT_logic().
WARNING: arch/x86/kernel/built-in.o(.text+0x14a92): Section mismatch in reference from the function unlock_ExtINT_logic()
to the function .init.text:find_isa_irq_pin()
The function unlock_ExtINT_logic() references
the function __init find_isa_irq_pin().
This is often because unlock_ExtINT_logic lacks a __init
annotation or the annotation of find_isa_irq_pin is wrong.
Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x12cc9): Section mismatch in reference from the function unlock_ExtINT_logic()
unlock_ExtINT_logic() is only used by __init check_timer(). Annotate unlock_ExtINT_logic() witch __init.
Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix folowing warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10799): Section mismatch in reference from the function uniq_ioapic_id()
uniq_ioapic_id() is only used by __init mp_register_ioapic(). Annotate uniq_ioapic_id() with __init.
Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fixes section mismatch warnings of __cpuinit
setup_trampoline() on 32-bit host.
Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
get_bios_ebda() exists in asm/rio.h and asm/bios_ebda.h.
This patch removes the one in asm/rio.h.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the magic number in the third argment of div_sc().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the magic number in the second argument of clocksource_hz2mult()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
memset and NULL check after alloc_bootmem() are unnecessary.
Because it returns zeroed memory and it never return NULL.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use bitmap library for pin_programmed rather than reinvent
bitmaps.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove duplicate code by using MP_intsrc_info() in mpparse.c
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use BUILD_BUG_ON() instead of compile-time error technique with
extern non-exsistent function.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that there are no more special cases in sys32_ptrace, we
can convert to using the generic compat_sys_ptrace entry point.
The sys32_ptrace function gets simpler and becomes compat_arch_ptrace.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This removes the special-case handling for PTRACE_GETSIGINFO
and PTRACE_SETSIGINFO from x86_64's sys32_ptrace. The generic
compat_ptrace_request code handles these.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This lifts the set_fs(USER_DS) call for signal handler setup out of the
three places copying the same code into the one place that calls them
all. There is no change in what it does.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This lifts the code diddling the TF and DF bits for signal handler setup
out of the several places copying the same code into the one place that
calls them all. There is no change in what it does.
I also separated the recently-added DF bit clearing from the TF diddling.
The compiler turns them back into one instruction anyway. The tossing
in of DF to the same line of code with no new comments was a bit more
arcane than seems wise.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It is claimed that NexGen CPUs were never shipped:
http://lkml.org/lkml/2008/4/20/179
Also, the kernel support for these chips has been broken for
a long time, the code intended to support NexGen thereby being
essentially dead.
As an outcome of the discussion that can be found using the URL
above, this patch removes the NexGen support altogether.
The changes in this patch survived a defconfig build for i386, a
couple of successful randconfig builds, as well as a runtime test,
which consisted in booting a 32-bit x86 box up to the shell prompt.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In arch/x86/kernel/setup_64.c, the standard_io_resources array
is needlessly defined as global. This patch makes this variable
static.
This patch was successfully build-tested using the defconfig
for x86_64. Runtime test was performed by booting a 64-bit x86
box up to the shell prompt.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are no users for the function amd_init_cpu() defined in
arch/x86/kernel/cpu/amd.c. This patch removes this routine.
This patch was build-tested using defconfigs for i386 and x86_64,
and a few randconfig instances. Runtime tests were performed by
booting 32- and 64-bit x86 boxen up to the shell prompt.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At least on my Barcelona, I see MCE log entries after cold boot caused
by BIOS not properly clearing the respective registers. Therefore, this
patch extends the workaround to families 0x10 and 0x11 (the latter just
for completeness, I have nothing to verify this against).
At the same time, provide a way to make these entries visible via the
'mce=bootlog' command line option even on these machines.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
.. since it uses ILL_BADSTK (which is meaningless in the context of
SIGSEGV).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There apparently was an unnoticed conflict between an earlier patch to
this file and mine (d1e084746b), which
I noticed only now. I suppose a change like the one below (untested) is
needed; I didn't get any response on a confirmation request for this from
the submitter of the first patch.
The issue is the writing of the 'checkbit' member at the end of
setup_intel_arch_watchdog(), which my patch made go to intel_arch_wd_ops
rather than wd_ops.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Two prior changes resulted in the "ecx" clobber being lost.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
David S. Miller