Add a simple driver for pwm driver LEDs. pwm_id and period can be defined
in board file. It is developed for pxa, however it is probably generic
enough to be used on other platforms with pwm.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This patch allows drivers to override the default maximum brightness value
of 255. We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.
Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(S)WRITE_SYNC always unplugs the device right after IO submission.
Sometimes we want to build up a queue before doing so, so add
variants that explicitly DON'T unplug the queue. The caller must
then do that after submitting all the IO.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes sure that we never wait on async IO for sync requests, instead
of doing the split on writes vs reads.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This driver requests a clock that usually is supplied by the MFD in which
the DS1WM is contained. Currently, it is impossible for a MFD to register
their clocks with the generic clock API due to different implementations
across architectures.
For now, this patch removes the clock handling from DS1WM altogether,
trusting that the MFD enable/disable functions will switch the clock if
needed. The clock rate is obtained from a new parameter in driver_data.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Removes the now-unused bus_shift field from pasic3_platform_data.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
This patch converts the DS1WM driver into an MFD cell. It also
calculates the bus_shift parameter from the memory resource size.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Instead of always splitting the file offset into 32-bit 'high' and 'low'
parts, just split them into the largest natural word-size - which in C
terms is 'unsigned long'.
This allows 64-bit architectures to avoid the unnecessary 32-bit
shifting and masking for native format (while the compat interfaces will
obviously always have to do it).
This also changes the order of 'high' and 'low' to be "low first". Why?
Because when we have it like this, the 64-bit system calls now don't use
the "pos_high" argument at all, and it makes more sense for the native
system call to simply match the user-mode prototype.
This results in a much more natural calling convention, and allows the
compiler to generate much more straightforward code. On x86-64, we now
generate
testq %rcx, %rcx # pos_l
js .L122 #,
movq %rcx, -48(%rbp) # pos_l, pos
from the C source
loff_t pos = pos_from_hilo(pos_h, pos_l);
...
if (pos < 0)
return -EINVAL;
and the 'pos_h' register isn't even touched. It used to generate code
like
mov %r8d, %r8d # pos_low, pos_low
salq $32, %rcx #, tmp71
movq %r8, %rax # pos_low, pos.386
orq %rcx, %rax # tmp71, pos.386
js .L122 #,
movq %rax, -48(%rbp) # pos.386, pos
which isn't _that_ horrible, but it does show how the natural word size
is just a more sensible interface (same arguments will hold in the user
level glibc wrapper function, of course, so the kernel side is just half
of the equation!)
Note: in all cases the user code wrapper can again be the same. You can
just do
#define HALF_BITS (sizeof(unsigned long)*4)
__syscall(PWRITEV, fd, iov, count, offset, (offset >> HALF_BITS) >> HALF_BITS);
or something like that. That way the user mode wrapper will also be
nicely passing in a zero (it won't actually have to do the shifts, the
compiler will understand what is going on) for the last argument.
And that is a good idea, even if nobody will necessarily ever care: if
we ever do move to a 128-bit lloff_t, this particular system call might
be left alone. Of course, that will be the least of our worries if we
really ever need to care, so this may not be worth really caring about.
[ Fixed for lost 'loff_t' cast noticed by Andrew Morton ]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update driver model support in the MTD framework, so it fits
better into the current udev-based hotplug framework:
- Each mtd_info now has a device node. MTD drivers should set
the dev.parent field to point to the physical device, before
setting up partitions or otherwise declaring MTDs.
- Those device nodes always map to /sys/class/mtdX device nodes,
which no longer depend on MTD_CHARDEV.
- Those mtdX sysfs nodes have a "starter set" of attributes;
it's not yet sufficient to replace /proc/mtd.
- Enabling MTD_CHARDEV provides /sys/class/mtdXro/ nodes and the
/sys/class/mtd*/dev attributes (for udev, mdev, etc).
- Include a MODULE_ALIAS_CHARDEV_MAJOR macro. It'll work with
udev creating the /dev/mtd* nodes, not just a static rootfs.
So the sysfs structure is pretty much what you'd expect, except
that readonly chardev nodes are a bit quirky.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
We were comparing {bus,devfn} and assuming that a match meant it was the
same device. It doesn't -- the same {bus,devfn} can exist in
multiple PCI domains. Include domain number in device identification
(and call it 'segment' in most places, because there's already a lot of
references to 'domain' which means something else, and this code is
infected with ACPI thinking already).
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Implement the CREATE_EXCLUSIVE4_1 open mode conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
This mode allows the client to atomically create a file
if it doesn't exist while setting some of its attributes.
It must be implemented if the server supports persistent
reply cache and/or pnfs.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Also, use client minorversion to generate supported attrs
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Support enabling and disabling nfsv4.1 via /proc/fs/nfsd/versions
by writing the strings "+4.1" or "-4.1" correspondingly.
Use user mode nfs-utils (rpc.nfsd option) to enable.
This will allow us to get rid of CONFIG_NFSD_V4_1
[nfsd41: disable support for minorversion by default]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
For nfs41, the open share flags are used also for
delegation "wants" and "signals". Check that they are valid.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When sessions are used, stateful operation sequenceid and stateid handling
are not used. When sessions are used, on the first open set the seqid to 1,
mark state confirmed and skip seqid processing.
When sessionas are used the stateid generation number is ignored when it is zero
whereas without sessions bad_stateid or stale stateid is returned.
Add flags to propagate session use to all stateful ops and down to
check_stateid_generation.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd4_has_session should return a boolean, not u32]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: pass nfsd4_compoundres * to nfsd4_process_open1]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_stateid_op]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_seqid_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently we only use cstate->current_fh,
will also be used by nfsd41 code.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the destory_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A session inactivity time compound (lease renewal) or a compound where the
sequence operation has sa_cachethis set to FALSE do not require any pages
to be held in the v4.1 DRC. This is because struct nfsd4_slot is already
caching the session information.
Add logic to the nfs41 server to not cache response pages for solo sequence
responses.
Return nfserr_replay_uncached_rep on the operation following the sequence
operation when sa_cachethis is FALSE.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfsd4_replay_cache_entry]
[nfsd41: rename nfsd4_no_page_in_cache]
[nfsd41 rename nfsd4_enc_no_page_replay]
[nfsd41 nfsd4_is_solo_sequence]
[nfsd41 change nfsd4_not_cached return]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed return type to bool]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 drop parens in nfsd4_is_solo_sequence call]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed "== 0" to "!"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Replace the nfs4_client cl_seqid field with a single struct nfs41_slot used
for the create session replay cache.
The CREATE_SESSION slot sets the sl_session pointer to NULL. Otherwise, the
slot and it's replay cache are used just like the session slots.
Fix unconfirmed create_session replay response by initializing the
create_session slot sequence id to 0.
A future patch will set the CREATE_SESSION cache when a SEQUENCE operation
preceeds the CREATE_SESSION operation. This compound is currently only cached
in the session slot table.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: revert portion of nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netpp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the create_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Look up the client id (generated by the server on exchange_id,
given by the client on create_session).
If neither a confirmed or unconfirmed client is found
then the client id is stale
If a confirmed cilent is found (i.e. we already received
create_session for it) then compare the sequence id
to determine if it's a replay or possibly a mis-ordered rpc.
If the seqid is in order, update the confirmed client seqid
and procedd with updating the session parameters.
If an unconfirmed client_id is found then verify the creds
and seqid. If both match move the client id to confirmed state
and proceed with processing the create_session.
Currently, we do not support persistent sessions, and RDMA.
alloc_init_session generates a new sessionid and creates
a session structure.
NFSD_PAGES_PER_SLOT is used for the max response cached calculation, and for
the counting of DRC pages using the hard limits set in struct srv_serv.
A note on NFSD_PAGES_PER_SLOT:
Other patches in this series allow for NFSD_PAGES_PER_SLOT + 1 pages to be
cached in a DRC slot when the response size is less than NFSD_PAGES_PER_SLOT *
PAGE_SIZE but xdr_buf pages are used. e.g. a READDIR operation will encode a
small amount of data in the xdr_buf head, and then the READDIR in the xdr_buf
pages. So, the hard limit calculation use of pages by a session is
underestimated by the number of cached operations using the xdr_buf pages.
Yet another patch caches no pages for the solo sequence operation, or any
compound where cache_this is False. So the hard limit calculation use of
pages by a session is overestimated by the number of these operations in the
cache.
TODO: improve resource pre-allocation and negotiate session
parameters accordingly. Respect and possibly adjust
backchannel attributes.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
[nfsd41: remove headerpadsz from channel attributes]
Our client and server only support a headerpadsz of 0.
[nfsd41: use DRC limits in fore channel init]
[nfsd41: do not change CREATE_SESSION back channel attrs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from alloc_init_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_create_session error handling]
[nfsd41: fix comment style in init_forechannel_attrs]
[nfsd41: allocate struct nfsd4_session and slot table in one piece]
[nfsd41: no need to INIT_LIST_HEAD in alloc_init_session just prior to list_add]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Replay a request in nfsd4_sequence.
Add a minorversion to struct nfsd4_compound_state.
Pass the current slot to nfs4svc_encode_compound res via struct
nfsd4_compoundres to set an NFSv4.1 DRC entry.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfs4svc_encode_compoundres]
[nfsd41 replace nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Use no more than 1/128th of the number of free pages at nfsd startup for the
v4.1 DRC.
This is an arbitrary default which should probably end up under the control
of an administrator.
Signed-off-by: Andy Adamson <andros@netapp.com>
[moved added fields in struct svc_serv under CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix set_max_drc calculation of sv_drc_max_pages]
[moved NFSD_DRC_SIZE_SHIFT's declaration up in header file]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cache all the result pages, including the rpc header in rq_respages[0],
for a request in the slot table cache entry.
Cache the statp pointer from nfsd_dispatch which points into rq_respages[0]
just past the rpc header. When setting a cache entry, calculate and save the
length of the nfs data minus the rpc header for rq_respages[0].
When replaying a cache entry, replace the cached rpc header with the
replayed request rpc result header, unless there is not enough room in the
cached results first page. In that case, use the cached rpc header.
The sessions fore channel maxresponse size cached is set to NFSD_PAGES_PER_SLOT
* PAGE_SIZE. For compounds we are cacheing with operations such as READDIR
that use the xdr_buf->pages to hold data, we choose to cache the extra page of
data rather than copying data from xdr_buf->pages into the xdr_buf->head page.
[nfsd41: limit cache to maxresponsesize_cached]
[nfsd41: mv nfsd4_set_statp under CONFIG_NFSD_V4_1]
[nfsd41: rename nfsd4_move_pages]
[nfsd41: rename page_no variable]
[nfsd41: rename nfsd4_set_cache_entry]
[nfsd41: fix nfsd41_copy_replay_data comment]
[nfsd41: add to nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the sequence operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Check for stale clientid (as derived from the sessionid).
Enforce slotid range and exactly-once semantics using
the slotid and seqid.
If everything went well renew the client lease and
mark the slot INPROGRESS.
Add a struct nfsd4_slot pointer to struct nfsd4_compound_state.
To be used for sessions DRC replay.
[nfsd41: rename sequence catchthis to cachethis]
Signed-off-by: Andy Adamson<andros@netapp.com>
[pulled some code to set cstate->slot from "nfsd DRC logic"]
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd: add a struct nfsd4_slot pointer to struct nfsd4_compound_state]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: add nfsd4_session pointer to nfsd4_compound_state]
[nfsd41: set cstate session]
[nfsd41: use cstate session in nfsd4_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_sequence error handling]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We need to distinguish between client names provided by NFSv4.0 clients
SETCLIENTID and those provided by NFSv4.1 via EXCHANGE_ID when looking
up the clientid by string.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd41: use boolean values for use_exchange_id argument]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: simplify match_clientid_establishment logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the exchange_id operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28
Based on the client provided name, hash a client id.
If a confirmed one is found, compare the op's creds and
verifier. If the creds match and the verifier is different
then expire the old client (client re-incarnated), otherwise,
if both match, assume it's a replay and ignore it.
If an unconfirmed client is found, then copy the new creds
and verifer if need update, otherwise assume replay.
The client is moved to a confirmed state on create_session.
In the nfs41 branch set the exchange_id flags to
EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER
(pNFS is not supported, Referrals are supported,
Migration is not.).
Address various scenarios from section 18.35 of the spec:
1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set
EXCHGID4_FLAG_CONFIRMED_R as appropriate.
2. Return error codes per 18.35.4 scenarios.
3. Update client records or generate new client ids depending on
scenario.
Note: 18.35.4 case 3 probably still needs revisiting. The handling
seems not quite right.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamosn <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use utsname for major_id (and copy to server_scope)]
[nfsd41: fix handling of various exchange id scenarios]
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A]
[simplify nfsd4_encode_exchange_id error handling]
[nfsd41: embed an xdr_netobj in nfsd4_exchange_id]
[nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Define nfsd41_dec_ops vector and add it to nfsd4_minorversion for
minorversion 1.
Note: nfsd4_enc_ops vector is shared for v4.0 and v4.1
since we don't need to filter out obsolete ops as this is
done in the decoding phase.
exchange_id, create_session, destroy_session, and sequence ops are
implemented as stubs returning nfserr_opnotsupp at this stage.
[was nfsd41: xdr stubs]
[get rid of CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Simple sessionid hashing using its monotonically increasing sequence number.
Locking considerations:
sessionid_hashtbl access is controlled by the sessionid_lock spin lock.
It must be taken for insert, delete, and lookup.
nfsd4_sequence looks up the session id and if the session is found,
it calls nfsd4_get_session (still under the sessionid_lock).
nfsd4_destroy_session calls nfsd4_put_session after unhashing
it, so when the session's kref reaches zero it's going to get freed.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[we don't use a prime for sessionid hash table size]
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch provides basic data structures representing the nfs41
sessions and slots, plus helpers for keeping a reference count
on the session and freeing it.
Note that our server only support a headerpadsz of 0 and
it ignores backchannel attributes at the moment.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: remove headerpadsz from channel attributes]
[nfsd41: embed nfsd4_channel in nfsd4_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_slot]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Define all NFSv4.1 common operation and error code constants.
Note that some of the definitions are used by both the nfs41 client
and the server code. This patch is duplicated in the nfs41 and nfsd41
sessions patchset.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: add exchange id flags]
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[removed server-only hunk changing NFSERR_REPLAY_ME]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: add SEQ4_XX to nfs41-common-protocol]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: generic error code update]
[nfs41: reverse EXCHGID4_INVAL_FLAG_MASK_{A,R}]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be
returned. It is up to the NFSv4.1 client to resend only the operations that
have not been processed.
Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in
nfsd4_proc_compound() only when NFSv4.1 Sessions are used.
Note: this isn't an adequate solution on its own. It's acceptable as a way
to get some minimal 4.1 up and working, but we're going to have to find a
way to avoid returning DELAY in all common cases before 4.1 can really be
considered ready.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse rq_nodeferral negative logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[sunrpc: initialize rq_usedeferral]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch contains DST core files, which introduce
block layer, connector and sysfs registration glue and main headers.
Connector is used for the configuration of the node (its type, address,
device name and so on). Sysfs provides bits of information about running
devices in the following format:
+/*
+ * DST sysfs tree for device called 'storage':
+ *
+ * /sys/bus/dst/devices/storage/
+ * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025
+ * /sys/bus/dst/devices/storage/size : 800
+ * /sys/bus/dst/devices/storage/name : storage
+ */
DST header contains structure definitions and protocol command description.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When extended interrupt mode (x2apic mode) is not supported in a
system, it must set compatibility format interrupt to bypass
interrupt remapping, otherwise compatibility format interrupts
will be blocked.
This will be used when interrupt remapping is enabled while x2apic
is not supported.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This patch enables suspend/resume for interrupt remapping. During suspend,
interrupt remapping is disabled. When resume, interrupt remapping is enabled
again.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This patch implements the suspend and resume feature for Intel IOMMU
DMAR. It hooks to kernel suspend and resume interface. When suspend happens, it
saves necessary hardware registers. When resume happens, it restores the
registers and restarts IOMMU by enabling translation, setting up root entry, and
re-enabling queued invalidation.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Need to free the old cpumask for affinity and pending_mask.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49D18FF0.50707@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit f4112de6b6 ("mm: introduce
debug_kmap_atomic") broke PPC builds with CONFIG_HIGHMEM=y:
CC init/main.o
In file included from include/linux/highmem.h:25,
from include/linux/pagemap.h:11,
from include/linux/mempolicy.h:63,
from init/main.c:53:
arch/powerpc/include/asm/highmem.h: In function 'kmap_atomic_prot':
arch/powerpc/include/asm/highmem.h:98: error: implicit declaration of function 'debug_kmap_atomic'
In file included from include/linux/pagemap.h:11,
from include/linux/mempolicy.h:63,
from init/main.c:53:
include/linux/highmem.h: At top level:
include/linux/highmem.h:196: warning: conflicting types for 'debug_kmap_atomic'
include/linux/highmem.h:196: error: static declaration of 'debug_kmap_atomic' follows non-static declaration
include/asm/highmem.h:98: error: previous implicit declaration of 'debug_kmap_atomic' was here
make[1]: *** [init/main.o] Error 1
make: *** [init] Error 2
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nfs_readpage_async() needs to be non-static so that it can be used as a
fallback for the local on-disk caching should an EIO crop up when reading the
cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Add some new NFS I/O counters for FS-Cache doing things for NFS. A new line is
emitted into /proc/pid/mountstats if caching is enabled that looks like:
fsc: <rok> <rfl> <wok> <wfl> <unc>
Where <rok> is the number of pages read successfully from the cache, <rfl> is
the number of failed page reads against the cache, <wok> is the number of
successful page writes to the cache, <wfl> is the number of failed page writes
to the cache, and <unc> is the number of NFS pages that have been disconnected
from the cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Bind data storage objects in the local cache to NFS inodes.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Luotao Fu