Also get rid of a redundant call to nfs_setattr_update_inode(). The call to
nfs3_proc_setattr() already takes care of that.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The Linux NFS4 client simply skips over the bitmask in an O_EXCL open
call and so it doesn't bother to reset any fields that may be holding
the verifier. This patch has us save the first two words of the bitmask
(which is all the current client has #defines for). The client then
later checks this bitmask and turns on the appropriate flags in the
sattr->ia_verify field for the following SETATTR call.
This patch only currently checks to see if the server used the atime
and mtime slots for the verifier (which is what the Linux server uses
for this). I'm not sure of what other fields the server could
reasonably use, but adding checks for others should be trivial.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_symlink() allocates a GFP_KERNEL page for the pagecache. Most
pagecache pages are allocated using GFP_HIGHUSER, and there's no reason
not to do that in nfs_symlink() as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We don't need to revalidate the fsid on the root directory. It suffices to
revalidate it on the current directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_do_close() does not currently have any way to ensure that the user
won't attempt to unmount the partition while the asynchronous RPC call
is completing. This again may cause Oopses in nfs_update_inode().
Add a vfsmount argument to nfs4_close_state to ensure that the partition
remains mounted while we're closing the file.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A number of race conditions may currently ensue if the user presses ^C
and then unmounts the partition while an asynchronous open() is in
progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since PG_uptodate may now end up getting set during the call to
nfs_wb_page(), we can avoid putting a read request on the wire in those
situations.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The write may fail, so we should not mark the page as uptodate until we are
certain that the data has been accepted and written to disk by the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no need to fail the entire O_DIRECT read/write just because
get_user_pages() returned fewer pages than we requested.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current code is leaking a reference to dreq->kref when the calls to
nfs_direct_read_schedule() and nfs_direct_write_schedule() return an
error.
This patch moves the call to kref_put() from nfs_direct_wait() back into
nfs_direct_read() and nfs_direct_write() (which are the functions that
actually took the reference in the first place) fixing the leak.
Thanks to Denis V. Lunev for spotting the bug and proposing the original
fix.
Acked-by: Denis V. Lunev <dlunev@gmail.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We only need to dirty the pages that were actually read in.
Also convert nfs_direct_dirty_pages() to call set_page_dirty() instead of
set_page_dirty_lock(). A call to lock_page() is unacceptable in an rpciod
callback function.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch fixes a couple of signage issues that were causing an Oops
when running the LTP diotest4 test. get_user_pages() returns a signed
error, hence we need to be careful when comparing with the unsigned
number of pages from data->npages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When processes are allowed to attempt to lock a non-contiguous range of nfs
write requests, it is possible for generic_writepages to 'wrap round' the
address space, and call writepage() on a request that is already locked by
the same process.
We avoid the deadlock by checking if the page index is contiguous with the
list of nfs write requests that is already held in our
nfs_pageio_descriptor prior to attempting to lock a new request.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fs/nfs/dir.c:610:8: warning: symbol 'nfs_llseek_dir' was not declared.
Should it be static?
- fs/nfs/dir.c:636:5: warning: symbol 'nfs_fsync_dir' was not declared.
Should it be static?
- fs/nfs/write.c:925:19: warning: symbol 'req' shadows an earlier one
- fs/nfs/write.c:61:6: warning: symbol 'nfs_commit_rcu_free' was not
declared. Should it be static?
- fs/nfs/nfs4proc.c:793:5: warning: symbol 'nfs4_recover_expired_lease'
was not declared. Should it be static?
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The XDR code should not depend on the physical allocation size of
structures like nfs4_stateid and nfs4_verifier since those may have to
change at some future date. We therefore replace all uses of
sizeof() with constants like NFS4_VERIFIER_SIZE and NFS4_STATEID_SIZE.
This also has the side-effect of fixing some warnings of the type
format ‘%u’ expects type ‘unsigned int’, but argument X has type
‘long unsigned int’
on 64-bit systems
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use zero_user_page() instead of the newly deprecated memclear_highpage_flush().
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make it more useful for debugging purposes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The maximum size of an NFSv4 SETATTR compound reply should include the
GETATTR operation that we send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The check for nfs_attribute_timeout(dir) in nfs_check_verifier is
redundant: nfs_lookup_revalidate() will already call nfs_revalidate_inode()
on the parent dir when necessary.
The only case where this is not done is the case of a negative dentry. Fix
this case by moving up the revalidation code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
dentry verifiers are always set to the parent directory's
cache_change_attribute. There is no reason to be testing for anything other
than equality when we're trying to find out if the dentry has been checked
since the last time the directory was modified.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the atomic_t in struct nfs_server to atomic_long_t in anticipation
of machines that can handle 8+TB of (4K) pages under writeback.
However I suspect other things in NFS will start going *bang* by then.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by
SLAB.
I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again? The callback is
performed before each freeing of an object.
I would think that it is much easier to check the object state manually
before the free. That also places the check near the code object
manipulation of the object.
Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on. If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code. But there is no such code
in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e. add debug code before kfree).
There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches. Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
This is the last slab flag that SLUB did not support. Remove the check for
unimplemented flags from SLUB.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure pages are uptodate after returning from read_cache_page, which allows
us to cut out most of the filesystem-internal PageUptodate calls.
I didn't have a great look down the call chains, but this appears to fixes 7
possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in
ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in
block2mtd. All depending on whether the filler is async and/or can return
with a !uptodate page.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
posix_test_lock() and ->lock() do the same job but have gratuitously
different interfaces. Modify posix_test_lock() so the two agree,
simplifying some code in the process.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The file_lock argument to ->lock is used to return the conflicting lock
when found. There's no reason for the filesystem to return any private
information with this conflicting lock, but nfsv4 is.
Fix nfsv4 client, and modify locks.c to stop calling fl_release_private
for it in this case.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: "Trond Myklebust" <Trond.Myklebust@netapp.com>"
fs/nfs/pagelist.c:226: error: conflicting types for 'nfs_pageio_init'
include/linux/nfs_page.h:80: error: previous declaration of 'nfs_pageio_init' was here
Thanks to Andrew for spotting this...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove some stale comments about hard limits which went away in 2.5.
Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The ACL that the server sets may not be exactly the one we set--for
example, it may silently turn off bits that it does not support. So we
should remove any cached ACL so that any subsequent request for the ACL
will go to the server.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Try running this script in an NFS mounted directory (Client relatively
recent - 2.6.18 has the problem as does 2.6.20).
------------------------------------------------------
#!/bin/bash
#
# This script will produce the following errormessage from tar:
#
# tar: newdir/innerdir/innerfile: file changed as we read it
# create dirs
rm -rf nfstest
mkdir -p nfstest/dir/innerdir
# create files (should not be empty)
echo "Hello World!" >nfstest/dir/file
echo "Hello World!" >nfstest/dir/innerdir/innerfile
# problem only happens if we sleep before chmod
sleep 1
# change file modes
chmod -R a+r nfstest
# rename dir
mv nfstest/dir nfstest/newdir
# tar it
tar -cf nfstest/nfstest.tar -C nfstest newdir
# restore old dir name
mv nfstest/newdir nfstest/dir
--------------------------------------------------------
What happens:
The 'chmod -R' does a readdir_plus in each directory and the results
get cached in the page cache. It then updates the ctime on each file
by one second. When this happens, the post-op attributes are used to
update the ctime stored on the client to match the value in the kernel.
The 'mv' calls shrink_dcache_parent on the directory tree which
flushes all the dentries (so a new lookup will be required) but
doesn't flush the inodes or pagecache.
The 'tar' does a readdir on each directory, but (in the case of
'innerdir' at least) satisfies it from the pagecache and uses the
READDIRPLUS data to update all the inodes. In the case of
'innerdir/innerfile', the ctime is out of date.
'tar' then calls 'lstat' on innerdir/innerfile getting an old ctime.
It then opens the file (triggering a GETATTR), reads the content, and
then calls fstat to see if anything has changed. It finds that ctime
has changed and so complains.
The problem seems to be that the cache readdirplus info is kept around
for too long.
My patch below discards pagecache data for directories when
dentry_iput is called on them. This effectively removes the symptom
which convinces me that I correctly understand the problem. However
I'm not convinced that is a proper solution, as there could easily be
other races that trigger the same problem without being affected by
this 'fix'.
One possibility would be to require that readdirplus pagecache data be
only used *once* to instantiate an inode. Somehow it should then be
invalidated so that if the dentry subsequently disappears, it will
cause a new request to the server to fill in the stat data.
Another possibility is to compare the cache_change_attribute on the
inode with something similar for the readdirplus info and reject the
info from readdirplus if it is too old.
I haven't tried to implement these and would value other opinions
before I do.
Thanks,
NeilBrown
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't use uninitialsed value for fattr->time_start in readdirplus results.
The 'fattr' structure filled in by nfs3_decode_direct does not get a
value for ->time_start set.
Thus if an entry is for an inode that we already have in cache,
when nfs_readdir_lookup calls nfs_fhget, it will call nfs_refresh_inode
and may update the inode with out-of-date information.
Directories are read a page at a time, so each page could have a
different timestamp that "should" be used to set the time_start for
the fattr for info in that page. However storing the timestamp per
page is awkward. (We could stick in the first 4 bytes and only read 4092
bytes, but that is a bigger code change than I am interested it).
This patch ignores the readdir_plus attributes if a readdir finds the
information already in cache, and otherwise sets ->time_start to the time
the readdir request was sent to the server.
It might be nice to store - in the directory inode - the time stamp for
the earliest readdir request that is still in the page cache, so that we
don't ignore attribute data that we don't have to. This patch doesn't do
that.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
READDIRPLUS can be a performance hindrance when the client is working with
large directories. In addition, some servers still have bugs in their
implementations (e.g. Tru64 returns wrong values for the fsid).
Add a mount flag to enable users to turn it off at mount time following the
implementation in Apple's NFS client.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is arguable whether NFSROOT will support IPv6, and thus whether
rpcb_getport_external needs to support rpcbind versions greater than 2.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPC buffer size estimation logic in net/sunrpc/clnt.c always
significantly overestimates the requirements for the buffer size.
A little instrumentation demonstrated that in fact rpc_malloc was never
allocating the buffer from the mempool, but almost always called kmalloc.
To compute the size of the RPC buffer more precisely, split p_bufsiz into
two fields; one for the argument size, and one for the result size.
Then, compute the sum of the exact call and reply header sizes, and split
the RPC buffer precisely between the two. That should keep almost all RPC
buffers within the 2KiB buffer mempool limit.
And, we can finally be rid of RPC_SLACK_SPACE!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust