55d04dff0f
New kernel option nowait allows disabling the use of the wait instruction.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
569f75bd02
Use an irq_enable_hazard hazard barrier in unmask_mips_irq. This
...
hasn't been an actual bug, so it's more a change to be 100% compliant
with the requirements of the architecture spec. Similar fix to
mask_mips_irq where there was a slightly less theoretical chance of
getting hit.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
7db36c858c
Add inotify syscalls for MIPS.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
ec74e361f1
Mark a few variables __read_mostly.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
cc61c1fede
MIPS R2 instruction hazard handling.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
bbc7f22f6d
Detect the 34K.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
079ef8bb80
Generate code for MIPS32 / MIPS64 Release 2 if configured for one of
...
these architectures.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
1e5f1caa5d
MIPS 32/64 R2 config option.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
e5de3b4687
In pcibios_enable_resources go back to handling all PCI_NUM_RESOURCES
...
resources. We tried previous but ran into problems ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
e80de8503c
Use Kconfig.preempt.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
60080265a1
Define kmap_atomic_pfn() for MIPS.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
129bc8f78b
Setup_frame is now returning a success value.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
b490ff4270
Temporary hack for Qemu and MIPSsim until they get a proper ELF loader.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
3ef33e68c1
Date: Fri Jul 8 20:10:17 2005 +0000
...
Those literals are long.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
4552074577
IP30 Identification.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
85f14bf2cb
... and it isn't a canonicalized triplet but just the n-plet used to
...
configure gcc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
73f74e23a6
Grep deesn't like shell-style matching...
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
f425a6dce5
Hack to make compiles for the other endianness easier.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
6e760c8dae
Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
ca4973dd55
Don't redeclare ll_local_timer_interrupt.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
50bd2c72ca
Brian Murphy says:
...
this fixes Lasat pci to work with multi-function devices by assigning
the correct values based on pin number (instead of ignoring them).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
ec125c129e
Code cleanup, thanks Brian Murphy.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thiemo Seufer <ths@networkno.de>
19 years ago
a5fc9c0bbe
Use physical addresses at the interface level, letting drivers remap
...
them as appropriate.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
2c93e12cfe
Avoid tlbw* hazards for the R4600/R4700/R5000.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
c3455b0efc
Inline ioremap() calls for constant addresses that map to KSEG1.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
c134a5ecdb
Avoid defining variables in the middle of a block which breaks older
...
compilers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
4c0a2d4275
Fix the diagnostic dump for the XTLB refill handler.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
41986a6e7e
Fix a diagnostic message.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
362b1d546d
Conversion to plat_setup() for TX4927 also.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
01d42abdf3
Using get_nasid() to find the console node will blow up nicely if
...
called on a another node than the console node, so use the master_nasid
instead and in the unlikely case that one isn't initialized yet, fall
back to get_nasid().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
c4559f67b7
Always use ".set mips3" rather than select between "mips2" or "mips3"
...
for assembling ll/sc sequences to avoid problems with 64-bit
configurations.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
69c75fb458
Actual handlers for bus errors for Pmax and 3min.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
19 years ago
64dac503e8
System-specific handling of bus errors for DECstation variations
...
supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional
clean-ups for the ECC handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
3b2396d972
Use correct names for bits in the R3k cp0.status register.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
c6ad7b7d3c
Use macros for the RM7k cp0.config bits instead of magic numbers.
...
Minor clean-ups.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
8a185d14b6
Fix types for firmware arguments. Don't define unneeded messages.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
260c96738c
Mark __die() "noreturn" for real.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
3bd4c902da
Deal with the bloody KSEG vs CKSEG horror...
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
902d21d531
There is NO port I/O space on the DECstation. Minor clean-ups.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
02416dcf5a
Redo RM9000 workaround which along with other DSP ASE changes was
...
causing some headache for debuggers knowing about signal frames.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
aac8aa7717
Enable a suitable ISA for the assembler around ll/sc so that code
...
builds even for processors that don't support the instructions.
Plus minor formatting fixes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
fded2e508a
Optimize R3k TLB Load/Store/Modified handlers, by scheduling
...
delay slots properly and avoiding an unnecessary jump to a jump.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
d925c262dd
Fill R3k load delay slots properly.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
9678e28b1a
Only dump instructions actually emitted.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
68e4a86c80
This interrupt is *always* handled -- MIPS_BE_DISCARD just means
...
no further action wanted.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
d5b6f1db5d
For MIPS32/MIPS64 cp0.config.mt == 1 implies a standard (R4k-style)
...
TLB, so no need to set it separately for each implementation.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
81731f7997
The DbAu1500 board also support big endian. Gee, imagine that.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
e50c0a8fa6
Support the MIPS32 / MIPS64 DSP ASE.
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
10f650db1b
64-bit fixes for Alchemy code ;)
...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
149f60b30c
When building for Atlas, Malta or SEAD convert the kernel to srecs by
...
default.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 years ago
Ralf Baechle