The dib7000m_i2c_enumeration() function is not used by any public drivers,
however some prototype board use it. So '#if 0' for now, but don't remove it.
Thanks to Patrick Boettcher for clarifying this.
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API
- Cleanups
- Use v4l_dbg/v4l_info to have uniform kernel messages
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API
- Cleanups
- Use v4l_dbg/v4l_info to have uniform kernel messages
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cleanup tda9840 and use a v4l2 API to get the tuner subchannels.
Do some cleanups in mxb and switch to saa7115 instead of the saa7111
module.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The saa7111 support in saa7115.c was missing some features and did not
properly take some of the differences into account. With this patch
saa7115 can be used in the mxb driver instead of saa7111.c.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fixed and Added some validations
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Set mmio throttling delay default to 0 nsec. Not doing so makes analog
tuner audio not work on some mahcines.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- V4L2_CAP_VBI_OUTPUT is not supported by ivtv, remove it.
- ivtv_try_fmt_vid_out also needed to constrain the width/height of MPEG decoder
window sizes.
- allow empty sliced services.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It was possible to set out-of-bounds windows sizes, this is now
fixed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add some utility functions to set registers.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When changing the standard the saa6752hs was not updated unless the input
was the TV tuner. The saa6752hs should be updated regardless of the input.
In addition the S_STD and G_STD ioctls for the mpeg video device didn't do
anything. This is now fixed: they behave just like S_STD and G_STD on the
video0 device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Increment u8 pointers not void pointers. Incrementing void pointers
is dubious and the real intent in cx18_memcpy_fromio() and cx18_memset_io() is
to increment by bytes, so use u8 pointers instead.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Throttle mmio to/from the CX23418 so boards work in older systems. The
CX23418 couldn't reliably handle mmio at the rate at which the cx18 driver was
attempting to access the chip. The PCI bridge arrangements and settings on
modern motherboards still allowed the CX23418 to work OK, but it didn't work
well on many older motherboards: mysterious I2C errors, firmware loading errors,
etc. This patch adds a throttle to *all* mmio access to the CX23418. It
defaults to a delay of 31 ns, but is adjustable by the mmio_ndelay module parm.
My HVR-1600 and Raptor PAL/SECAM card now function for analog capture on a
motherboard with an Intel 82810E Northbridge and 82801AA Southbridge.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Create cx18_ specific wrappers for all pci mmio accessesors. This is a
first step in instrumenting all CX23418 PCI bus IO, to debug problems with
accessing the CX23418's PCI memory mapped IO.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Correct CX23418 PCI configuration settings. The CX23418 doesn't have
I/O space registers, so there was no need to try and turn them on (the card
ignores the attempt to set the bit anyway). Also removed incorrect config
space register setting that was errantly borrowed from ivtv.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- image transfer by bulk
- set the max number of transfer URS's to 4 (was 16)
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix sparse warnings. None are serious, but cutting down on these helps find
future serious sparse warnings/errors.
Redid the av7710.c patch based on a suggestion by Oliver Endriss.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Disable "virtual" IR receiver on for 24xxx devices that have an
internal IR blaster. In that case there's another another IR
receiver present and to leave the virtual receiver available
just causes confusion. This means that 24xxx users will no
longer see a phantom IR chip.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This builds upon the previous pvrusb2 change to more formally
implement full cropping support. This enables access from the
driver's V4L interface, and enables access to full capabilities from
sysfs as well. Note that this is only effective when in analog mode.
It also will only work when the underlying digitizer's driver (saa7115
or cx25840 depending on the hardware) also implements the appropriate
functions.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The pvrusb2 control mechanism up until now has used a constant int to
hold a control's default value. This change makes it possible to
retrieve the control's default through some other means, e.g. as a
result of a query from lower level software.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Implement pvrusb2 driver plumbing to support cropping. Submitted by a
pvrusb2 user.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver includes an internal table specifying additional
information on a per device-type basis. This works great until
somebody tries to run-time associate another USB ID with the driver.
This change should hopefully allow the driver to fail gracefully under
such a circumstance.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The earlier change from Hans Verkuil that pushed the BKL from
video_open() down into the drivers should be unneeded for the pvrusb2
driver. This driver's implementation for open already protects its
internal structures through other means, thus the BKL is not required.
This change reverses Hans' previous change, for the pvrusb2 driver.
It probably would have been a good idea for Hans to previously have
asked for my ack before committing his change.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Supply callback to load firmware for the TDHD1 tuner (using request_firmware).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for the 'full-ts' hardware modification.
On full-featured cards the data throughput is limited by the hardware
design. The full-ts mod removes this bottleneck, i.e. the card is able
to deliver the complete transport stream of a transponder.
For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When the input is set to tuner and no antenna is connected, the BT848
can flood VPRES interrupts. So we don't want to enable this type of
interrupts when the input it set to tuner.
As we don't do anything when receiving such an interrupt anyway, the
easiest fix is to simply not unmask this specific interrupt.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Reactivated dummy frontend driver which is extremely useful for debugging.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need
to be included at all.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Replace the old register_chrdev with the more flexible register_chrdev_region.
Ensure that the release() is called when the very last chardev usage was
released, and not when the sysfs devices were removed. This should simplify
hotpluggable drivers considerably.
Tested-by: Mike Isely <isely@isely.net>
Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: David Ellingsworth <david@identd.dyndns.org>
Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pass the payload size instead of the header size to uvc_video_decode_end() to
avoid generating an extra trace message for each frame.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for
controlling JPEG compression quality.
Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky