Add initial device tree to support prairie-iot on reference IIOT platforms. Change-Id: Ic64b1d4291dbfb65b69bc474c7e82876116ab315 Signed-off-by: Vishwanath Raju K <vishk@codeaurora.org>tirimbino
Vishwanath Raju K
5 years ago
committed by
Gerrit - the friendly Code Review server
parent
56227e8389
commit
f01e70b285
@ -0,0 +1,62 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/clock/qcom,camcc-sm6150.h> |
||||
|
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-audio-overlay.dtsi" |
||||
|
||||
/ { |
||||
model = "Command mode display IDP overlay"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 3>; |
||||
}; |
||||
|
||||
&qupv3_se1_i2c { |
||||
synaptics_dsx@20 { |
||||
compatible = "synaptics,dsx-i2c"; |
||||
reg = <0x20>; |
||||
interrupt-parent = <&tlmm>; |
||||
interrupts = <89 0x2008>; |
||||
vdd-supply = <&pm6150_l10>; |
||||
avdd-supply = <&pm6150l_l7>; |
||||
pinctrl-names = "pmx_ts_active","pmx_ts_suspend", |
||||
"pmx_ts_release"; |
||||
pinctrl-0 = <&ts_int_active &ts_reset_active>; |
||||
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; |
||||
pinctrl-2 = <&ts_release>; |
||||
synaptics,pwr-reg-name = "avdd"; |
||||
synaptics,bus-reg-name = "vdd"; |
||||
synaptics,ub-i2c-addr = <0x20>; |
||||
synaptics,max-y-for-2d = <2159>; |
||||
synaptics,irq-gpio = <&tlmm 89 0x2008>; |
||||
synaptics,reset-gpio = <&tlmm 88 0x0>; |
||||
synaptics,irq-on-state = <0>; |
||||
synaptics,power-delay-ms = <200>; |
||||
synaptics,reset-delay-ms = <200>; |
||||
synaptics,reset-on-state = <0>; |
||||
synaptics,reset-active-ms = <20>; |
||||
}; |
||||
|
||||
himax_ts@48 { |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
|
||||
&dsi_td4328_truly_cmd_display { |
||||
qcom,dsi-display-active; |
||||
}; |
||||
@ -0,0 +1,23 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "qcs610.dtsi" |
||||
#include "prairie-iot-idp.dtsi" |
||||
|
||||
/ { |
||||
model = "Qualcomm Technologies, Inc. QCS610 Command mode display IDP"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 3>; |
||||
}; |
||||
@ -0,0 +1,32 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/clock/qcom,camcc-sm6150.h> |
||||
|
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-ext-codec-audio-overlay.dtsi" |
||||
#include "sm6150-external-codec.dtsi" |
||||
|
||||
/ { |
||||
model = "External Audio Codec IDP overlay"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 1>; |
||||
}; |
||||
|
||||
&dsi_hx83112a_truly_vid_display { |
||||
qcom,dsi-display-active; |
||||
}; |
||||
@ -0,0 +1,24 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "qcs610.dtsi" |
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "prairie-iot-external-codec-idp.dtsi" |
||||
#include "sm6150-ext-codec-audio-overlay.dtsi" |
||||
|
||||
/ { |
||||
model = "Qualcomm Technologies, Inc. QCS610 External Audio Codec IDP"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,board-id = <34 1>; |
||||
}; |
||||
@ -0,0 +1,153 @@ |
||||
/* |
||||
* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include <dt-bindings/sound/audio-codec-port-types.h> |
||||
#include "sm6150-wcd.dtsi" |
||||
|
||||
&sm6150_snd { |
||||
qcom,model = "sm6150-tavil-snd-card"; |
||||
qcom,tavil_codec = <1>; |
||||
qcom,ext-disp-audio-rx = <1>; |
||||
qcom,audio-routing = |
||||
"AIF4 VI", "MCLK", |
||||
"RX_BIAS", "MCLK", |
||||
"MADINPUT", "MCLK", |
||||
"hifi amp", "LINEOUT1", |
||||
"hifi amp", "LINEOUT2", |
||||
"AMIC2", "MIC BIAS2", |
||||
"MIC BIAS2", "Headset Mic", |
||||
"AMIC3", "MIC BIAS2", |
||||
"MIC BIAS2", "ANCRight Headset Mic", |
||||
"AMIC4", "MIC BIAS2", |
||||
"MIC BIAS2", "ANCLeft Headset Mic", |
||||
"AMIC5", "MIC BIAS3", |
||||
"MIC BIAS3", "Handset Mic", |
||||
"DMIC0", "MIC BIAS1", |
||||
"MIC BIAS1", "Digital Mic0", |
||||
"DMIC1", "MIC BIAS1", |
||||
"MIC BIAS1", "Digital Mic1", |
||||
"DMIC2", "MIC BIAS3", |
||||
"MIC BIAS3", "Digital Mic2", |
||||
"DMIC3", "MIC BIAS3", |
||||
"MIC BIAS3", "Digital Mic3", |
||||
"DMIC4", "MIC BIAS4", |
||||
"MIC BIAS4", "Digital Mic4", |
||||
"DMIC5", "MIC BIAS4", |
||||
"MIC BIAS4", "Digital Mic5", |
||||
"SpkrLeft IN", "SPK1 OUT", |
||||
"SpkrRight IN", "SPK2 OUT"; |
||||
asoc-cpu = <&dai_dp>, <&dai_mi2s0>, <&dai_mi2s1>, |
||||
<&dai_mi2s2>, <&dai_mi2s3>, <&dai_mi2s4>, |
||||
<&dai_pri_auxpcm>, <&dai_sec_auxpcm>, |
||||
<&dai_tert_auxpcm>, <&dai_quat_auxpcm>, |
||||
<&dai_quin_auxpcm>, |
||||
<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>, |
||||
<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>, |
||||
<&sb_4_rx>, <&sb_4_tx>, <&sb_5_rx>, <&sb_5_tx>, |
||||
<&sb_6_rx>, <&sb_7_rx>, <&sb_7_tx>, |
||||
<&sb_8_rx>, <&sb_8_tx>, |
||||
<&proxy_rx>, <&proxy_tx>, |
||||
<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, |
||||
<&afe_proxy_tx>, <&incall_record_rx>, |
||||
<&incall_record_tx>, <&incall_music_rx>, |
||||
<&incall_music_2_rx>, |
||||
<&usb_audio_rx>, <&usb_audio_tx>, |
||||
<&dai_pri_tdm_rx_0>, <&dai_pri_tdm_tx_0>, |
||||
<&dai_sec_tdm_rx_0>, <&dai_sec_tdm_tx_0>, |
||||
<&dai_tert_tdm_rx_0>, <&dai_tert_tdm_tx_0>, |
||||
<&dai_quat_tdm_rx_0>, <&dai_quat_tdm_tx_0>, |
||||
<&dai_quin_tdm_rx_0>, <&dai_quin_tdm_tx_0>; |
||||
asoc-cpu-names = "msm-dai-q6-dp.24608", |
||||
"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1", |
||||
"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3", |
||||
"msm-dai-q6-mi2s.4", |
||||
"msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2", |
||||
"msm-dai-q6-auxpcm.3", "msm-dai-q6-auxpcm.4", |
||||
"msm-dai-q6-auxpcm.5", |
||||
"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385", |
||||
"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387", |
||||
"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389", |
||||
"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391", |
||||
"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393", |
||||
"msm-dai-q6-dev.16394", "msm-dai-q6-dev.16395", |
||||
"msm-dai-q6-dev.16396", |
||||
"msm-dai-q6-dev.16398", "msm-dai-q6-dev.16399", |
||||
"msm-dai-q6-dev.16400", "msm-dai-q6-dev.16401", |
||||
"msm-dai-q6-dev.8194", "msm-dai-q6-dev.8195", |
||||
"msm-dai-q6-dev.224", "msm-dai-q6-dev.225", |
||||
"msm-dai-q6-dev.241", "msm-dai-q6-dev.240", |
||||
"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772", |
||||
"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770", |
||||
"msm-dai-q6-dev.28672", "msm-dai-q6-dev.28673", |
||||
"msm-dai-q6-tdm.36864", "msm-dai-q6-tdm.36865", |
||||
"msm-dai-q6-tdm.36880", "msm-dai-q6-tdm.36881", |
||||
"msm-dai-q6-tdm.36896", "msm-dai-q6-tdm.36897", |
||||
"msm-dai-q6-tdm.36912", "msm-dai-q6-tdm.36913", |
||||
"msm-dai-q6-tdm.36928", "msm-dai-q6-tdm.36929"; |
||||
asoc-codec = <&stub_codec>, <&ext_disp_audio_codec>; |
||||
asoc-codec-names = "msm-stub-codec.1", "msm-ext-disp-audio-codec-rx"; |
||||
qcom,hph-en0-gpio = <&tavil_hph_en0>; |
||||
qcom,hph-en1-gpio = <&tavil_hph_en1>; |
||||
qcom,wsa-max-devs = <2>; |
||||
qcom,wsa-devs = <&wsa881x_11>, <&wsa881x_12>, |
||||
<&wsa881x_13>, <&wsa881x_14>; |
||||
qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight", |
||||
"SpkrLeft", "SpkrRight"; |
||||
qcom,msm_audio_ssr_devs = <&audio_apr>, <&wcd934x_cdc>, |
||||
<&q6core>, <&lpi_tlmm>; |
||||
}; |
||||
|
||||
&slim_aud { |
||||
status = "okay"; |
||||
tavil_codec { |
||||
swr3: swr_master { |
||||
compatible = "qcom,swr-mstr"; |
||||
#address-cells = <2>; |
||||
#size-cells = <0>; |
||||
qcom,swr-num-ports = <8>; |
||||
qcom,swr-port-mapping = <1 SPKR_L 0x1>, |
||||
<2 SPKR_L_COMP 0xF>, <3 SPKR_L_BOOST 0x3>, |
||||
<4 SPKR_R 0x1>, <5 SPKR_R_COMP 0xF>, |
||||
<6 SPKR_R_BOOST 0x3>, <7 SPKR_L_VI 0x3>, |
||||
<8 SPKR_R_VI 0x3>; |
||||
qcom,swr_master_id = <1>; |
||||
wsa881x_11: wsa881x@11 { |
||||
compatible = "qcom,wsa881x"; |
||||
reg = <0x00 0x20170211>; |
||||
qcom,spkr-sd-n-node = <&wsa_spk_wcd_sd1>; |
||||
}; |
||||
|
||||
wsa881x_12: wsa881x@12 { |
||||
compatible = "qcom,wsa881x"; |
||||
reg = <0x00 0x20170212>; |
||||
qcom,spkr-sd-n-node = <&wsa_spk_wcd_sd2>; |
||||
}; |
||||
|
||||
wsa881x_13: wsa881x@13 { |
||||
compatible = "qcom,wsa881x"; |
||||
reg = <0x00 0x21170213>; |
||||
qcom,spkr-sd-n-node = <&wsa_spk_wcd_sd1>; |
||||
}; |
||||
|
||||
wsa881x_14: wsa881x@14 { |
||||
compatible = "qcom,wsa881x"; |
||||
reg = <0x00 0x21170214>; |
||||
qcom,spkr-sd-n-node = <&wsa_spk_wcd_sd2>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&dai_slim { |
||||
status = "okay"; |
||||
}; |
||||
@ -0,0 +1,31 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/clock/qcom,camcc-sm6150.h> |
||||
|
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-audio-overlay.dtsi" |
||||
|
||||
/ { |
||||
model = "Internal Audio Codec IDP overlay"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 0>; |
||||
}; |
||||
|
||||
&dsi_hx83112a_truly_vid_display { |
||||
qcom,dsi-display-active; |
||||
}; |
||||
@ -0,0 +1,23 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "qcs610.dtsi" |
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-audio-overlay.dtsi" |
||||
|
||||
/ { |
||||
model = "Qualcomm Technologies, Inc. QCS610 PM6150 IDP"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,board-id = <34 0>; |
||||
}; |
||||
@ -0,0 +1,403 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm6150-thermal-overlay.dtsi" |
||||
#include "sm6150-camera-sensor-idp.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h> |
||||
#include <dt-bindings/input/input.h> |
||||
#include "sm6150-sde-display.dtsi" |
||||
#include <dt-bindings/clock/qcom,gcc-sm6150.h> |
||||
|
||||
&qupv3_se3_i2c { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
status = "ok"; |
||||
#include "smb1390.dtsi" |
||||
#include "smb1355.dtsi" |
||||
}; |
||||
|
||||
&pm6150l_gpios { |
||||
key_vol_up { |
||||
key_vol_up_default: key_vol_up_default { |
||||
pins = "gpio2"; |
||||
function = "normal"; |
||||
input-enable; |
||||
bias-pull-up; |
||||
power-source = <0>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&soc { |
||||
gpio_keys { |
||||
compatible = "gpio-keys"; |
||||
label = "gpio-keys"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&key_vol_up_default>; |
||||
|
||||
vol_up { |
||||
label = "volume_up"; |
||||
gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; |
||||
linux,input-type = <1>; |
||||
linux,code = <KEY_VOLUMEUP>; |
||||
linux,can-disable; |
||||
debounce-interval = <15>; |
||||
gpio-key,wakeup; |
||||
}; |
||||
}; |
||||
|
||||
mtp_batterydata: qcom,battery-data { |
||||
qcom,batt-id-range-pct = <15>; |
||||
#include "qg-batterydata-alium-3600mah.dtsi" |
||||
#include "qg-batterydata-mlp356477-2800mah.dtsi" |
||||
}; |
||||
emac_hw: qcom,emac@20000 { |
||||
compatible = "qcom,emac-dwc-eqos"; |
||||
qcom,arm-smmu; |
||||
reg = <0x20000 0x10000>, |
||||
<0x36000 0x100>; |
||||
reg-names = "emac-base", "rgmii-base"; |
||||
dma-bit-mask = <32>; |
||||
emac-core-version = <7>; |
||||
interrupts-extended = <&pdc 0 660 4>, <&pdc 0 661 4>, |
||||
<&tlmm 121 2>, <&pdc 0 651 4>, |
||||
<&pdc 0 652 4>, <&pdc 0 653 4>, |
||||
<&pdc 0 654 4>, <&pdc 0 655 4>, |
||||
<&pdc 0 656 4>, <&pdc 0 657 4>, |
||||
<&pdc 0 658 4>, <&pdc 0 659 4>, |
||||
<&pdc 0 668 4>, <&pdc 0 669 4>; |
||||
interrupt-names = "sbd-intr", "lpi-intr", |
||||
"phy-intr", "tx-ch0-intr", |
||||
"tx-ch1-intr", "tx-ch2-intr", |
||||
"tx-ch3-intr", "tx-ch4-intr", |
||||
"rx-ch0-intr", "rx-ch1-intr", |
||||
"rx-ch2-intr", "rx-ch3-intr", |
||||
"ptp_pps_irq_0","ptp_pps_irq_1"; |
||||
qcom,msm-bus,name = "emac"; |
||||
qcom,msm-bus,num-cases = <4>; |
||||
qcom,msm-bus,num-paths = <2>; |
||||
qcom,msm-bus,vectors-KBps = |
||||
<98 512 0 0>, <1 781 0 0>, /* No vote */ |
||||
<98 512 1250 0>, <1 781 0 40000>, /* 10Mbps vote */ |
||||
<98 512 12500 0>, <1 781 0 40000>, /* 100Mbps vote */ |
||||
<98 512 125000 0>, <1 781 0 40000>; /* 1000Mbps vote */ |
||||
qcom,bus-vector-names = "0", "10", "100", "1000"; |
||||
clocks = <&clock_gcc GCC_EMAC_AXI_CLK>, |
||||
<&clock_gcc GCC_EMAC_PTP_CLK>, |
||||
<&clock_gcc GCC_EMAC_RGMII_CLK>, |
||||
<&clock_gcc GCC_EMAC_SLV_AHB_CLK>; |
||||
clock-names = "eth_axi_clk", "eth_ptp_clk", |
||||
"eth_rgmii_clk", "eth_slave_ahb_clk"; |
||||
qcom,phy-reset = <&tlmm 104 GPIO_ACTIVE_HIGH>; |
||||
qcom,phy-intr-redirect = <&tlmm 121 GPIO_ACTIVE_LOW>; |
||||
gdsc_emac-supply = <&emac_gdsc>; |
||||
pinctrl-names = "dev-emac-mdc", "dev-emac-mdio", |
||||
"dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state", |
||||
"dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state", |
||||
"dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state", |
||||
"dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state", |
||||
"dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state", |
||||
"dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state", |
||||
"dev-emac-phy_intr", "dev-emac-phy_reset_state", |
||||
"dev-emac_pin_pps_0"; |
||||
|
||||
pinctrl-0 = <&emac_mdc>; |
||||
pinctrl-1 = <&emac_mdio>; |
||||
pinctrl-2 = <&emac_rgmii_txd0>; |
||||
pinctrl-3 = <&emac_rgmii_txd1>; |
||||
pinctrl-4 = <&emac_rgmii_txd2>; |
||||
pinctrl-5 = <&emac_rgmii_txd3>; |
||||
pinctrl-6 = <&emac_rgmii_txc>; |
||||
pinctrl-7 = <&emac_rgmii_tx_ctl>; |
||||
pinctrl-8 = <&emac_rgmii_rxd0>; |
||||
pinctrl-9 = <&emac_rgmii_rxd1>; |
||||
pinctrl-10 = <&emac_rgmii_rxd2>; |
||||
pinctrl-11 = <&emac_rgmii_rxd3>; |
||||
pinctrl-12 = <&emac_rgmii_rxc>; |
||||
pinctrl-13 = <&emac_rgmii_rx_ctl>; |
||||
pinctrl-14 = <&emac_phy_intr>; |
||||
pinctrl-15 = <&emac_phy_reset_state>; |
||||
pinctrl-16 = <&emac_pin_pps_0>; |
||||
|
||||
io-macro-info { |
||||
io-macro-bypass-mode = <0>; |
||||
io-interface = "rgmii"; |
||||
}; |
||||
emac_emb_smmu: emac_emb_smmu { |
||||
compatible = "qcom,emac-smmu-embedded"; |
||||
iommus = <&apps_smmu 0x1C0 0x0>; |
||||
qcom,iova-mapping = <0x80000000 0x40000000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&qupv3_se0_2uart { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&qupv3_se7_4uart { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&pm6150l_wled { |
||||
qcom,string-cfg= <3>; |
||||
qcom,leds-per-string = <7>; |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&pm6150l_lcdb { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&ufsphy_mem { |
||||
compatible = "qcom,ufs-phy-qmp-v3-660"; |
||||
|
||||
vdda-phy-supply = <&pm6150_l4>; /* 0.9v */ |
||||
vdda-phy-always-on; |
||||
vdda-pll-supply = <&pm6150_l11>; |
||||
vdda-phy-max-microamp = <30000>; |
||||
vdda-pll-max-microamp = <12000>; |
||||
|
||||
status = "ok"; |
||||
}; |
||||
|
||||
&ufshc_mem { |
||||
vdd-hba-supply = <&ufs_phy_gdsc>; |
||||
vdd-hba-fixed-regulator; |
||||
vcc-supply = <&pm6150l_l11>; |
||||
vcc-voltage-level = <2950000 2960000>; |
||||
vccq2-supply = <&pm6150_l12>; |
||||
vcc-max-microamp = <600000>; |
||||
vccq2-max-microamp = <600000>; |
||||
|
||||
qcom,vddp-ref-clk-supply = <&pm6150l_l3>; |
||||
qcom,vddp-ref-clk-max-microamp = <100>; |
||||
qcom,vddp-ref-clk-min-uV = <1232000>; |
||||
qcom,vddp-ref-clk-max-uV = <1260000>; |
||||
|
||||
status = "ok"; |
||||
}; |
||||
|
||||
&qupv3_se1_i2c { |
||||
status = "okay"; |
||||
himax_ts@48 { |
||||
compatible = "himax,hxcommon"; |
||||
reg = <0x48>; |
||||
interrupt-parent = <&tlmm>; |
||||
interrupts = <89 0x2008>; |
||||
vdd-supply = <&pm6150_l10>; |
||||
avdd-supply = <&pm6150l_l7>; |
||||
pinctrl-names = "pmx_ts_active","pmx_ts_suspend", |
||||
"pmx_ts_release"; |
||||
pinctrl-0 = <&ts_int_active &ts_reset_active>; |
||||
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; |
||||
pinctrl-2 = <&ts_release>; |
||||
himax,panel-coords = <0 1080 0 2160>; |
||||
himax,display-coords = <0 1080 0 2160>; |
||||
himax,irq-gpio = <&tlmm 89 0x00>; |
||||
himax,rst-gpio = <&tlmm 88 0x00>; |
||||
report_type = <1>; |
||||
}; |
||||
}; |
||||
|
||||
&qupv3_se5_i2c { |
||||
status = "ok"; |
||||
qcom,clk-freq-out = <1000000>; |
||||
|
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
nq@28 { |
||||
compatible = "qcom,nq-nci"; |
||||
reg = <0x28>; |
||||
qcom,nq-irq = <&tlmm 86 0x00>; |
||||
qcom,nq-ven = <&tlmm 84 0x00>; |
||||
qcom,nq-firm = <&tlmm 85 0x00>; |
||||
qcom,nq-clkreq = <&tlmm 50 0x00>; |
||||
interrupt-parent = <&tlmm>; |
||||
interrupts = <86 0>; |
||||
interrupt-names = "nfc_irq"; |
||||
pinctrl-names = "nfc_active", "nfc_suspend"; |
||||
pinctrl-0 = <&nfc_int_active &nfc_enable_active |
||||
&nfc_clk_req_active>; |
||||
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend |
||||
&nfc_clk_req_suspend>; |
||||
}; |
||||
}; |
||||
|
||||
&sdhc_1 { |
||||
vdd-supply = <&pm6150l_l11>; |
||||
qcom,vdd-voltage-level = <2950000 2950000>; |
||||
qcom,vdd-current-level = <0 570000>; |
||||
|
||||
vdd-io-supply = <&pm6150_l12>; |
||||
qcom,vdd-io-always-on; |
||||
qcom,vdd-io-lpm-sup; |
||||
qcom,vdd-io-voltage-level = <1800000 1800000>; |
||||
qcom,vdd-io-current-level = <0 325000>; |
||||
|
||||
pinctrl-names = "active", "sleep"; |
||||
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
||||
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
||||
|
||||
status = "ok"; |
||||
}; |
||||
|
||||
&sdhc_2 { |
||||
vdd-supply = <&pm6150l_l9>; |
||||
qcom,vdd-voltage-level = <2950000 2950000>; |
||||
qcom,vdd-current-level = <0 800000>; |
||||
|
||||
vdd-io-supply = <&pm6150l_l6>; |
||||
qcom,vdd-io-voltage-level = <1800000 3100000>; |
||||
qcom,vdd-io-current-level = <0 22000>; |
||||
|
||||
pinctrl-names = "active", "sleep"; |
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
||||
|
||||
cd-gpios = <&tlmm 99 1>; |
||||
|
||||
status = "ok"; |
||||
}; |
||||
|
||||
&pm6150_qg { |
||||
qcom,battery-data = <&mtp_batterydata>; |
||||
qcom,qg-iterm-ma = <100>; |
||||
qcom,hold-soc-while-full; |
||||
qcom,linearize-soc; |
||||
qcom,cl-feedback-on; |
||||
}; |
||||
|
||||
&pm6150_charger { |
||||
io-channels = <&pm6150_vadc ADC_USB_IN_V_16>, |
||||
<&pm6150_vadc ADC_USB_IN_I>, |
||||
<&pm6150_vadc ADC_CHG_TEMP>, |
||||
<&pm6150_vadc ADC_DIE_TEMP>, |
||||
<&pm6150_vadc ADC_AMUX_THM4_PU2>, |
||||
<&pm6150_vadc ADC_SBUx>, |
||||
<&pm6150_vadc ADC_VPH_PWR>; |
||||
io-channel-names = "usb_in_voltage", |
||||
"usb_in_current", |
||||
"chg_temp", |
||||
"die_temp", |
||||
"conn_temp", |
||||
"sbux_res", |
||||
"vph_voltage"; |
||||
qcom,battery-data = <&mtp_batterydata>; |
||||
qcom,auto-recharge-soc = <98>; |
||||
qcom,step-charging-enable; |
||||
qcom,sw-jeita-enable; |
||||
qcom,fcc-stepping-enable; |
||||
qcom,suspend-input-on-debug-batt; |
||||
qcom,sec-charger-config = <3>; |
||||
qcom,thermal-mitigation = <4200000 3500000 3000000 |
||||
2500000 2000000 1500000 1000000 500000>; |
||||
dpdm-supply = <&qusb_phy0>; |
||||
qcom,charger-temp-max = <800>; |
||||
qcom,smb-temp-max = <800>; |
||||
}; |
||||
|
||||
&smb1390 { |
||||
/delete-property/ interrupts; |
||||
interrupts = <0x0 0xc2 0x0 IRQ_TYPE_LEVEL_LOW>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&smb_stat_default>; |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&smb1390_charger { |
||||
/delete-property/ compatible; |
||||
compatible = "qcom,smb1390-charger-psy"; |
||||
io-channels = <&pm6150_vadc ADC_AMUX_THM3>; |
||||
io-channel-names = "cp_die_temp"; |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&smb1355 { |
||||
/delete-property/ interrupts; |
||||
interrupts = <0x0 0xc2 0x0 IRQ_TYPE_LEVEL_LOW>; |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&smb1355_charger { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&dsi_sim_cmd { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_sim_vid { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_hx83112a_truly_video { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <4095>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_td4328_truly_video { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <4095>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_td4328_truly_cmd { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <4095>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_rm69298_truly_amoled_video { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <255>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_rm69298_truly_amoled_cmd { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <255>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
|
||||
&dsi_sharp_split_link_wuxga_video { |
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
||||
qcom,mdss-dsi-bl-min-level = <1>; |
||||
qcom,mdss-dsi-bl-max-level = <4095>; |
||||
qcom,platform-te-gpio = <&tlmm 90 0>; |
||||
qcom,platform-reset-gpio = <&tlmm 91 0>; |
||||
}; |
||||
@ -0,0 +1,31 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/clock/qcom,camcc-sm6150.h> |
||||
|
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-usbc-idp.dtsi" |
||||
|
||||
/ { |
||||
model = "USBC Audio IDP overlay"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 2>; |
||||
}; |
||||
|
||||
&dsi_hx83112a_truly_vid_display { |
||||
qcom,dsi-display-active; |
||||
}; |
||||
@ -0,0 +1,23 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "qcs610.dtsi" |
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "prairie-iot-usbc-idp.dtsi" |
||||
|
||||
/ { |
||||
model = "Qualcomm Technologies, Inc. QCS610 PM6150 USBC Audio IDP"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,board-id = <34 2>; |
||||
}; |
||||
@ -0,0 +1,19 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm6150-audio-overlay.dtsi" |
||||
|
||||
&sm6150_snd { |
||||
qcom,msm-mbhc-usbc-audio-supported = <1>; |
||||
qcom,msm-mbhc-hphl-swh = <0>; |
||||
qcom,msm-mbhc-gnd-swh = <0>; |
||||
}; |
||||
@ -0,0 +1,32 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/clock/qcom,camcc-sm6150.h> |
||||
|
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "sm6150-usbc-idp.dtsi" |
||||
|
||||
/ { |
||||
model = "USBC mini DP Primary Panel IDP overlay"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 4>; |
||||
}; |
||||
|
||||
&sde_dp { |
||||
qcom,dp-hpd-gpio = <&tlmm 103 0>; |
||||
qcom,dp-low-power-hw-hpd; |
||||
}; |
||||
@ -0,0 +1,29 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "qcs610.dtsi" |
||||
#include "prairie-iot-idp.dtsi" |
||||
#include "prairie-iot-usbc-idp.dtsi" |
||||
|
||||
/ { |
||||
model = "Qualcomm Technologies, Inc. QCS610 USBC mini DP Panel IDP"; |
||||
compatible = "qcom,qcs610-idp", "qcom,qcs610", "qcom,idp"; |
||||
qcom,msm-id = <401 0x0>; |
||||
qcom,board-id = <34 4>; |
||||
}; |
||||
|
||||
&sde_dp { |
||||
qcom,dp-hpd-gpio = <&tlmm 103 0>; |
||||
qcom,dp-low-power-hw-hpd; |
||||
}; |
||||
Loading…
Reference in new issue