jenna
/
kernel_samsung_sm7125
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

tty: Use the generic RS485 ioctl on CRIS

Browse Source 
Use the new general RS485 Linux data structure (introduced by Alan with
commit number c26c56c0f4) in the Cris
architecture too (currently, Cris still uses the old private data
structure instead of the new one).

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Tested-by: Hinko Kocevar <hinko.kocevar@cetrtapot.si>
Tested-by: Janez Cufer <janez.cufer@cetrtapot.si>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tirimbino
Claudio Scordino 16 years ago committed by Linus Torvalds
parent f786ddd285
commit 6fd1af4cf9
5 changed files with 66 additions and 29 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 5
      arch/cris/include/asm/ioctls.h
  2. 8
      arch/cris/include/asm/rs485.h
  3. 1
      arch/cris/include/asm/termios.h
  4. 79
      drivers/serial/crisv10.c
  5. 2
      drivers/serial/crisv10.h

5
arch/cris/include/asm/ioctls.h
Unescape View File

@ -74,8 +74,9 @@
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 */
#define TIOCSERWRRS485 0x5462 /* write rs-485 */
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
#define TIOCSERWRRS485 0x5462 /* write rs-485 */
#define TIOCSRS485 0x5463 /* enable rs-485 */
/* Used for packet mode */
#define TIOCPKT_DATA 0

8
arch/cris/include/asm/rs485.h
Unescape View File

@ -1,15 +1,13 @@
/* RS-485 structures */
/* RS-485 support */
/* Used with ioctl() TIOCSERSETRS485 */
/* Used with ioctl() TIOCSERSETRS485 for backward compatibility!
* XXX: Do not use it for new code!
*/
struct rs485_control {
unsigned short rts_on_send;
unsigned short rts_after_sent;
unsigned long delay_rts_before_send;
unsigned short enabled;
#ifdef __KERNEL__
int disable_serial_loopback;
#endif
};
/* Used with ioctl() TIOCSERWRRS485 */

1
arch/cris/include/asm/termios.h
Unescape View File

@ -4,6 +4,7 @@
#include <asm/termbits.h>
#include <asm/ioctls.h>
#include <asm/rs485.h>
#include <linux/serial.h>
struct winsize {
unsigned short ws_row;

79
drivers/serial/crisv10.c
Unescape View File

@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info)
#if defined(CONFIG_ETRAX_RS485)
/* Enable RS-485 mode on selected port. This is UGLY. */
static int
e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
#endif
info->rs485.rts_on_send = 0x01 & r->rts_on_send;
info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
info->rs485.flags = r->flags;
if (r->delay_rts_before_send >= 1000)
info->rs485.delay_rts_before_send = 1000;
else
info->rs485.delay_rts_before_send = r->delay_rts_before_send;
info->rs485.enabled = r->enabled;
/* printk("rts: on send = %i, after = %i, enabled = %i",
info->rs485.rts_on_send,
info->rs485.rts_after_sent,
@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
int old_enabled = info->rs485.enabled;
int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
/* rs485 is always implicitly enabled if we're using the ioctl()
* but it doesn't have to be set in the rs485_control
* but it doesn't have to be set in the serial_rs485
* (to be backward compatible with old apps)
* So we store, set and restore it.
*/
info->rs485.enabled = 1;
info->rs485.flags |= SER_RS485_ENABLED;
/* rs_write now deals with RS485 if enabled */
count = rs_write(tty, buf, count);
info->rs485.enabled = old_enabled;
if (!old_value)
info->rs485.flags &= ~(SER_RS485_ENABLED);
return count;
}
@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data)
struct e100_serial *info = (struct e100_serial *)data;
fast_timers_rs485[info->line].function = NULL;
e100_rts(info, info->rs485.rts_after_sent);
e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_enable_rx(info);
e100_enable_rx_irq(info);
@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info)
info->tr_running = 0;
#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
if (info->rs485.enabled) {
if (info->rs485.flags & SER_RS485_ENABLED) {
/* Set a short timer to toggle RTS */
start_one_shot_timer(&fast_timers_rs485[info->line],
rs485_toggle_rts_timer_function,
@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
info->icount.tx++;
if (info->xmit.head == info->xmit.tail) {
#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
if (info->rs485.enabled) {
if (info->rs485.flags & SER_RS485_ENABLED) {
/* Set a short timer to toggle RTS */
start_one_shot_timer(&fast_timers_rs485[info->line],
rs485_toggle_rts_timer_function,
@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty,
#if defined(CONFIG_ETRAX_RS485)
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
if (info->rs485.enabled)
if (info->rs485.flags & SER_RS485_ENABLED)
{
/* If we are in RS-485 mode, we need to toggle RTS and disable
* the receiver before initiating a DMA transfer
@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty,
fast_timers_rs485[info->line].function = NULL;
del_fast_timer(&fast_timers_rs485[info->line]);
#endif
e100_rts(info, info->rs485.rts_on_send);
e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_disable_rx(info);
e100_enable_rx_irq(info);
@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty,
count = rs_raw_write(tty, buf, count);
#if defined(CONFIG_ETRAX_RS485)
if (info->rs485.enabled)
if (info->rs485.flags & SER_RS485_ENABLED)
{
unsigned int val;
/* If we are in RS-485 mode the following has to be done:
@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty,
get_lsr_info(info, &val);
}while (!(val & TIOCSER_TEMT));
e100_rts(info, info->rs485.rts_after_sent);
e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_enable_rx(info);
@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
#if defined(CONFIG_ETRAX_RS485)
case TIOCSERSETRS485:
{
/* In this ioctl we still use the old structure
* rs485_control for backward compatibility
* (if we use serial_rs485, then old user-level code
* wouldn't work anymore...).
* The use of this ioctl is deprecated: use TIOCSRS485
* instead.*/
struct rs485_control rs485ctrl;
struct serial_rs485 rs485data;
printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
sizeof(rs485ctrl)))
return -EFAULT;
return e100_enable_rs485(tty, &rs485ctrl);
rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
rs485data.flags = 0;
if (rs485ctrl.enabled)
rs485data.flags |= SER_RS485_ENABLED;
else
rs485data.flags &= ~(SER_RS485_ENABLED);
if (rs485ctrl.rts_on_send)
rs485data.flags |= SER_RS485_RTS_ON_SEND;
else
rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
if (rs485ctrl.rts_after_sent)
rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
else
rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
return e100_enable_rs485(tty, &rs485data);
}
case TIOCSRS485:
{
/* This is the new version of TIOCSRS485, with new
* data structure serial_rs485 */
struct serial_rs485 rs485data;
if (copy_from_user(&rs485data, (struct rs485_control *)arg,
sizeof(rs485data)))
return -EFAULT;
return e100_enable_rs485(tty, &rs485data);
}
case TIOCSERWRRS485:
{
struct rs485_write rs485wr;
@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp)
/* port closed */
#if defined(CONFIG_ETRAX_RS485)
if (info->rs485.enabled) {
info->rs485.enabled = 0;
if (info->rs485.flags & SER_RS485_ENABLED) {
info->rs485.flags &= ~(SER_RS485_ENABLED);
#if defined(CONFIG_ETRAX_RS485_ON_PA)
*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
#endif
@ -4493,10 +4530,10 @@ rs_init(void)
#if defined(CONFIG_ETRAX_RS485)
/* Set sane defaults */
info->rs485.rts_on_send = 0;
info->rs485.rts_after_sent = 1;
info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
info->rs485.delay_rts_before_send = 0;
info->rs485.enabled = 0;
info->rs485.flags &= ~(SER_RS485_ENABLED);
#endif
INIT_WORK(&info->work, do_softint);

2
drivers/serial/crisv10.h
Unescape View File

@ -125,7 +125,7 @@ struct e100_serial {
int errorcode;
#ifdef CONFIG_ETRAX_RS485
struct rs485_control rs485; /* RS-485 support */
struct serial_rs485 rs485; /* RS-485 support */
#endif
};

Write Preview
Loading…
Cancel
Save