jenna
/
kernel_samsung_sm7125
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

regulator: max8925: fix enabled/disabled judgement mistake

Browse Source 
Max8925 ldo status should be determined by two factors:
1. power up/down sequence selection(LDOCTL[4:2]).
2. i2c enable bit(LDOCTL[0]).

Max8925 ldo support two types of power up/down sequence:
1. flexible sequence(LDOCTL[4:2] = 0~6).
2. i2c sequence(LDOCTL[4:2] = 7).

With flexible sequence selected, the ldo is enabled during power up by default.
With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]).

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
tirimbino
Kevin Liu 13 years ago committed by Mark Brown
parent e1de2f4234
commit 65364e9ab9
1 changed files with 20 additions and 13 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 33
      drivers/regulator/max8925-regulator.c

33
drivers/regulator/max8925-regulator.c
Unescape View File

@ -24,9 +24,13 @@
#define SD1_DVM_SHIFT 5 /* SDCTL1 bit5 */
#define SD1_DVM_EN 6 /* SDV1 bit 6 */
/* bit definitions in SD & LDO control registers */
#define OUT_ENABLE 0x1f /* Power U/D sequence as I2C */
#define OUT_DISABLE 0x1e /* Power U/D sequence as I2C */
/* bit definitions in LDO control registers */
#define LDO_SEQ_I2C 0x7 /* Power U/D by i2c */
#define LDO_SEQ_MASK 0x7 /* Power U/D sequence mask */
#define LDO_SEQ_SHIFT 2 /* Power U/D sequence offset */
#define LDO_I2C_EN 0x1 /* Enable by i2c */
#define LDO_I2C_EN_MASK 0x1 /* Enable mask by i2c */
#define LDO_I2C_EN_SHIFT 0 /* Enable offset by i2c */
struct max8925_regulator_info {
struct regulator_desc desc;
@ -40,7 +44,6 @@ struct max8925_regulator_info {
int vol_reg;
int vol_shift;
int vol_nbits;
int enable_bit;
int enable_reg;
};
@ -98,8 +101,10 @@ static int max8925_enable(struct regulator_dev *rdev)
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
return max8925_set_bits(info->i2c, info->enable_reg,
OUT_ENABLE << info->enable_bit,
OUT_ENABLE << info->enable_bit);
LDO_SEQ_MASK << LDO_SEQ_SHIFT |
LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
LDO_SEQ_I2C << LDO_SEQ_SHIFT |
LDO_I2C_EN << LDO_I2C_EN_SHIFT);
}
static int max8925_disable(struct regulator_dev *rdev)
@ -107,20 +112,24 @@ static int max8925_disable(struct regulator_dev *rdev)
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
return max8925_set_bits(info->i2c, info->enable_reg,
OUT_ENABLE << info->enable_bit,
OUT_DISABLE << info->enable_bit);
LDO_SEQ_MASK << LDO_SEQ_SHIFT |
LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
LDO_SEQ_I2C << LDO_SEQ_SHIFT);
}
static int max8925_is_enabled(struct regulator_dev *rdev)
{
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
int ldo_seq, ret;
ret = max8925_reg_read(info->i2c, info->enable_reg);
if (ret < 0)
return ret;
return ret & (1 << info->enable_bit);
ldo_seq = (ret >> LDO_SEQ_SHIFT) & LDO_SEQ_MASK;
if (ldo_seq != LDO_SEQ_I2C)
return 1;
else
return ret & (LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT);
}
static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
@ -188,7 +197,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
.vol_shift = 0, \
.vol_nbits = 6, \
.enable_reg = MAX8925_SDCTL##_id, \
.enable_bit = 0, \
}
#define MAX8925_LDO(_id, min, max, step) \
@ -207,7 +215,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
.vol_shift = 0, \
.vol_nbits = 6, \
.enable_reg = MAX8925_LDOCTL##_id, \
.enable_bit = 0, \
}
static struct max8925_regulator_info max8925_regulator_info[] = {

Write Preview
Loading…
Cancel
Save