cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

arch/arm/Kconfig

@@ -2150,7 +2150,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2160,12 +2159,6 @@ config CPU_FREQ_IMX
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
 config CPU_FREQ_S3C
 	bool
 	help

arch/arm/mach-sa1100/Kconfig

@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -47,7 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SHARP_LOCOMO
 	select SHARP_PARAM
 	select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select PCI
 	select PCI_NANOENGINE
 	help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB

arch/arm/mach-sa1100/Makefile

@@ -8,9 +8,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o

arch/arm/mach-sa1100/include/mach/generic.h

@@ -0,0 +1 @@
+#include "../../generic.h"

drivers/cpufreq/Kconfig.arm

@@ -127,6 +127,12 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_SA1100_CPUFREQ
+	bool
+
+config ARM_SA1110_CPUFREQ
+	bool
+
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR

drivers/cpufreq/Makefile

@@ -66,6 +66,8 @@ obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 

drivers/cpufreq/sa1100-cpufreq.c

@@ -91,10 +91,9 @@
 
 #include <asm/cputype.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 struct sa1100_dram_regs {
 	int speed;
 	u32 mdcnfg;

drivers/cpufreq/sa1110-cpufreq.c

@@ -27,10 +27,9 @@
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 #undef DEBUG
 
 struct sdram_params {